It's a Kenmore model 110.25852400
Doesn't leak at the drain tube. Doesn't leak a lot.
Can't figure out how to take it apart and how to find the leak.
Suggestions? Thanks, Gail

"P. Gail Chesler" wrote in message
...
It's a Kenmore model 110.25852400
Doesn't leak at the drain tube. Doesn't leak a lot.
Can't figure out how to take it apart and how to find the leak.
Suggestions? Thanks, Gail


well, for a start, it is made by whirlpool (the 110 number tells you this)

these DIY service instructions and troubleshooting guide should be
applicable:

http://cgi.ebay.com/ws/eBayISAPI.dll...tem=7512378317


cheers!

cowboy

Hi,

These may help....

http://www.applianceaid.com/procedures.html
http://www.applianceaid.com/direct.html

jeff.
Appliance Repair Aid
http://www.applianceaid.com/

I haven't been successful with leaks from the bottom of the tub, which this
is sounding like. Getting the drum out is a bear of a problem for the
un-initiated.


"P. Gail Chesler" wrote in message
...
It's a Kenmore model 110.25852400
Doesn't leak at the drain tube. Doesn't leak a lot.
Can't figure out how to take it apart and how to find the leak.
Suggestions? Thanks, Gail