Home Repair (alt.home.repair) For all homeowners and DIYers with many experienced tradesmen. Solve your toughest home fix-it problems.

 
 
LinkBack Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
  #1   Report Post  
 
Posts: n/a
Default Sanity/Code check on a garage utility sink

Hello,

I'm remodeling my kitchen and will have the old kitchen sink and faucet
available for use.

I'm toying with the idea of using this sink in the garage.

There is a space in my garage that is a perfect fit for the sink and cabinet
enclosure.

Nearby is the water heater and it's possible (note I'm just saying
physically possible) to tap into the hot and cold water supply using say
reducing tees and run some 1/2 rigid copper down the wall to the center of
this space and terminate them in supply fittings.

The problem is that there is no easy way to tie into the drain waste vent
system. The slab and walls would have to be opened up etc. Not something I
want to bother with.

So the idea I'm toying with is to stub out pvc from the sink drains to just
a vertical piece that would drain into a 5 gal bucket.
I would just empty this bucket into a toilet or outside drain when I'm done.
No, I would not be using dangerous chemicals in this sink. It would be
used mainly when home brewing for some minor cleanup and for a water supply.

I can see the objections being that you don't want to leave goopy water in
that 5 gal bucket to ferment. I think I could discipline myself to simply
empty and clean it after using. I wouldn't be using it to casually wash my
hands every 10 minutes. Just for the hour or so it takes to get a batch of
wort fermenting that I'd do every 2 weeks or so.

I know that this arrangement wouldn't meet code as a permanent fixture.
What I'm wondering is whether the tapping into the supply lines at the water
heater and running that bit of supply plumbing down the wall and terminating
in supply fittings could be done permanently and so as to meet code. If I
ever want to sell the place I'd remove the sink and shut off the supply
valves. Worse comes to worse I could always remove the plumbing and replace
the T's with unions as are there now.

Before you light up those flame throwers note that I'm not up on a step
ladder w/tubing cutter in one hand, a blowtorch in the other, and typing
this with my toes. (forgetting to have shut off the water of course)

Just toying with the idea and am looking for a sanity check.

thanks
ml

ps. What also just comes to mind is running some flexible pipe from the
sink drain stub to a sewer cleanout that's just outside the garage side
door.
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
New internal Door into integral garage in a townhouse question Paul \( Skiing8 \) UK diy 5 January 4th 05 09:28 PM
Semi-OT - adding circuits to a finished garage patrick conroy Woodworking 6 September 13th 04 06:10 PM
Single sink for sale PoP UK diy 0 March 4th 04 04:54 PM
Garage Supply - Spured off house sockets? Paul K UK diy 4 January 4th 04 05:44 PM
Sink Waste venting problem BillR UK diy 1 September 9th 03 04:16 AM


All times are GMT +1. The time now is 09:41 AM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 DIYbanter.
The comments are property of their posters.
 

About Us

"It's about DIY & home improvement"