Home |
Search |
Today's Posts |
|
Home Repair (alt.home.repair) For all homeowners and DIYers with many experienced tradesmen. Solve your toughest home fix-it problems. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
Hardwood Floor Installation: Time of the Year
Just talked to on hardwood guy and he said now (April) is the good
time to install wood. Because here in Calgary Alberta, we have very dry air in the winter. And if I wait until mid summer to do it, the gaps in winter will be larger. So now the air is still fairly dry, it will be better to do it now than summer. What he said kind of make sense to me but if that's true, what about people installing hardwood flooring in the driest months of the winter, wouldn't the floor all buckle during mid summer? He also said to use narrower stripe like 2 1/4" so that the contraction and expansion are smaller. Do you think what he said makes sense? Thanks. |
#2
|
|||
|
|||
wrote Just talked to on hardwood guy and he said now (April) is the good time to install wood. Because here in Calgary Alberta, we have very dry air in the winter. And if I wait until mid summer to do it, the gaps in winter will be larger. So now the air is still fairly dry, it will be better to do it now than summer. What he said kind of make sense to me but if that's true, what about people installing hardwood flooring in the driest months of the winter, wouldn't the floor all buckle during mid summer? He also said to use narrower stripe like 2 1/4" so that the contraction and expansion are smaller. Do you think what he said makes sense? Thanks. He posed some concerns, but gave the wrong reasons. I would kick him to the curb. Hardwood is installed year round, indoor humidity control deals with the moisture content of the wood. After all, you're not installing the floor outside in the extremes of dry/wet conditions. Smaller strips are not used because the contraction/expansion is smaller, it's because it's less likely to cup than a wider board because it is more stable. Wood species reacts differently to moisture content. Some wood you want for a hardwood is: American cherry, Oak, American Walnut, Teak, and there are more. You want to make sure to acclimate to conditions b/4 installing. The main concern is indoor humidity control. |
#3
|
|||
|
|||
I live in a house built in 1834 in a near subtropical climate.
I think your man has some reason on his side. Our floor shrink and expand with the seasons, inspite of central heat & air. TB |
#4
|
|||
|
|||
johnny wrote:
wrote Just talked to on hardwood guy and he said now (April) is the good time to install wood. Because here in Calgary Alberta, we have very dry air in the winter. And if I wait until mid summer to do it, the gaps in winter will be larger. So now the air is still fairly dry, it will be better to do it now than summer. What he said kind of make sense to me but if that's true, what about people installing hardwood flooring in the driest months of the winter, wouldn't the floor all buckle during mid summer? He also said to use narrower stripe like 2 1/4" so that the contraction and expansion are smaller. Do you think what he said makes sense? Thanks. He posed some concerns, but gave the wrong reasons. I would kick him to the curb. Hardwood is installed year round, indoor humidity control deals with the moisture content of the wood. After all, you're not installing the floor outside in the extremes of dry/wet conditions. Smaller strips are not used because the contraction/expansion is smaller, it's because it's less likely to cup than a wider board because it is more stable. Wood species reacts differently to moisture content. Some wood you want for a hardwood is: American cherry, Oak, American Walnut, Teak, and there are more. You want to make sure to acclimate to conditions b/4 installing. The main concern is indoor humidity control. Your points about acclimating the flooring before installation and humidity control are spot on. They're crucial factors in achieving a tight floor. I can't agree with you entirely on the smaller strips being only for cupping - the narrower the boards, the smaller each individual gap will be. The expansion/contraction for the floor as a whole is the same, though. I don't see why the floor guy's comments are reason to "kick him to the curb". He's obviously concerned about laying a tight floor and understands that humidity is the enemy. As far as laying floors in super dry conditions. That's a problem, too. A floor that is laid very tight in very dry conditions may not buckle per se, but the wood fibers at the outside edges of each board will be compressed/crushed as the humidity increases. Then when the floor shrinks back down again in lower humidity the gaps will be bigger. There's no such thing as perfect humidity or temperature control outside of some lab or a museum. Household HVAC helps, but it is not a total solution. R |
#5
|
|||
|
|||
On 7 Apr 2005 21:09:51 -0700, "RicodJour"
wrote: As far as laying floors in super dry conditions. That's a problem, too. A floor that is laid very tight in very dry conditions may not buckle per se, but the wood fibers at the outside edges of each board will be compressed/crushed as the humidity increases. Then when the floor shrinks back down again in lower humidity the gaps will be bigger. There's no such thing as perfect humidity or temperature control outside of some lab or a museum. Household HVAC helps, but it is not a total solution. Thanks for all your replies. So would you say installing hardwood floor now in a medium himidity level day and run a humidifier in the winter is the preferred way to go? Thanks. |
#6
|
|||
|
|||
wrote: On 7 Apr 2005 21:09:51 -0700, "RicodJour" wrote: As far as laying floors in super dry conditions. That's a problem, too. A floor that is laid very tight in very dry conditions may not buckle per se, but the wood fibers at the outside edges of each board will be compressed/crushed as the humidity increases. Then when the floor shrinks back down again in lower humidity the gaps will be bigger. There's no such thing as perfect humidity or temperature control outside of some lab or a museum. Household HVAC helps, but it is not a total solution. Thanks for all your replies. So would you say installing hardwood floor now in a medium himidity level day and run a humidifier in the winter is the preferred way to go? Thanks. To minimize expansion/contraction cycles you should try to maintain fairly uniform humidification. It doesn't have to be perfect, but try to minimize the extremes. Do you have central air conditioning to remove the excess summer humidity? There are tradeoffs in this as in anything. Adding humidity in the winter can be problematic if your house doesn't have adequate insulation and a good vapor barrier. The moisture can end up condensing in your walls and causing a bigger problem than some relatively small gaps in your floor. So don't go overboard with the winter humidification. If you take care of the acclimation of the flooring during installation and are aware of the problems created by too dry and too humid conditions and try to minimize the extremes, you'll be fine. R |
#7
|
|||
|
|||
NOFMA web site has useful "tip sheets" that include installation.
TB |
#8
|
|||
|
|||
Floors are instaled year around on quality homes and don`t have future
issues if allowed to reach the same humidity as the home. It can take weeks or more. Only one way to know use a moisture meter. The guy just wants work now, he is BSn you, so what does he do when it is humid all summer, Not work? No he has a different line for humid times. Sounds like he is outa work and needs a job, But does he use a moisture meter to compare wood to your homes humidity, probably not. Floors need edge expansion room . Call the floor manufacturer or supplier. |
#9
|
|||
|
|||
m Ransley wrote:
Floors are instaled year around on quality homes and don`t have future issues if allowed to reach the same humidity as the home. It can take weeks or more. Only one way to know use a moisture meter. The guy just wants work now, he is BSn you, so what does he do when it is humid all summer, Not work? No he has a different line for humid times. Sounds like he is outa work and needs a job, But does he use a moisture meter to compare wood to your homes humidity, probably not. Floors need edge expansion room . Call the floor manufacturer or supplier. The moisture meter is good insurance, and the acclimation can take a while as you say, but I'm not convinced that the contractor is scamming as some have assumed. It's obviously preferable to avoid installing during the seasons of highest and lowest humidity...which does point to now as a good time to do it. As far as the floors getting installed year round, what choice is there? You don't expect the flooring manufacturers or wood organizations to recommend limiting the time of installation to just half of the year, do you? People start projects year round - they're not going to wait maybe months for the perfect conditions. More likely the owners/builders would switch flooring materials. There are posts year round about the weather being too cold/hot/wet/whatever for concrete/stucco/whatever and the work forges on. We can give advice and recommendations on how to minimize the impact of the weather, but it can't be escaped in construction. R |
#10
|
|||
|
|||
wrote in message ... On 7 Apr 2005 21:09:51 -0700, "RicodJour" wrote: As far as laying floors in super dry conditions. That's a problem, too. A floor that is laid very tight in very dry conditions may not buckle per se, but the wood fibers at the outside edges of each board will be compressed/crushed as the humidity increases. Then when the floor shrinks back down again in lower humidity the gaps will be bigger. There's no such thing as perfect humidity or temperature control outside of some lab or a museum. Household HVAC helps, but it is not a total solution. Thanks for all your replies. So would you say installing hardwood floor now in a medium himidity level day and run a humidifier in the winter is the preferred way to go? Thanks. Yes, as long as you let the wood acclimatate in your house before installation. Length of acclimatation depends on humidity difference between wood and environment. I let mine stand inside for one week. There has been some yearly shrinking every winter but it's acceptable (less than 1/16 inch between some planks, none in most places). |
#11
|
|||
|
|||
Measuring moisture % in wood is different then measuring humidity in
air, dry wood is is considered less than 15%. My sill on concrete is 12% now in a basement of 50% humidity. I can see 90 % humidity being a minor concern but the real issue is wet wood shrinks . Properly instaled floors have expansion gaps as the house itself will expand and contract. Any new wood should be measured for % water, I use a Delmhorst meter. Wood takes a long time to dry if improperly stored at warehouses. |
#12
|
|||
|
|||
time of year? tax time
|
#13
|
|||
|
|||
"RicodJour" wrote in message I don't see why the floor guy's comments are reason to "kick him to the curb". He's obviously concerned about laying a tight floor and understands that humidity is the enemy. R I'd kick him to the curb for the tactic of implying this is a good time to lay a floor, and implying winter is not the time to install. We both know flooring is installed year round and proper humidity control is the key for minimizing shrinkage/swelling regardless of when the floor is installed . The story the OP told leaves me with a visual of someone hurting for work, and some scare tactics to get work. In other words, not totally honest with the OP, so that is a concern. |
#14
|
|||
|
|||
johnny wrote:
"RicodJour" wrote in message I don't see why the floor guy's comments are reason to "kick him to the curb". He's obviously concerned about laying a tight floor and understands that humidity is the enemy. R I'd kick him to the curb for the tactic of implying this is a good time to lay a floor, and implying winter is not the time to install. We both know flooring is installed year round and proper humidity control is the key for minimizing shrinkage/swelling regardless of when the floor is installed . The story the OP told leaves me with a visual of someone hurting for work, and some scare tactics to get work. In other words, not totally honest with the OP, so that is a concern. I didn't get the impression that the guy was exerting big pressure on the OP to do it NOW! I guess we'll have to wait for the OP to tell us if there were scare tactics involved and other telltale signs of a contractor in trouble. If not, maybe the guy was just being a regular contractor and asking for the guy to sign on the dotted line. We'll see. R |
#15
|
|||
|
|||
jstp wrote:
wrote in message ... On 7 Apr 2005 21:09:51 -0700, "RicodJour" wrote: As far as laying floors in super dry conditions. That's a problem, too. A floor that is laid very tight in very dry conditions may not buckle per se, but the wood fibers at the outside edges of each board will be compressed/crushed as the humidity increases. Then when the floor shrinks back down again in lower humidity the gaps will be bigger. There's no such thing as perfect humidity or temperature control outside of some lab or a museum. Household HVAC helps, but it is not a total solution. Thanks for all your replies. So would you say installing hardwood floor now in a medium himidity level day and run a humidifier in the winter is the preferred way to go? Thanks. Yes, as long as you let the wood acclimatate in your house before installation. Length of acclimatation depends on humidity difference between wood and environment. I let mine stand inside for one week. There has been some yearly shrinking every winter but it's acceptable (less than 1/16 inch between some planks, none in most places). Do you control indoor humidity? We have oak floor (2 1/4" planks) that was installed mid-sumer (July or August 2000), and there are lots of cracks of 1/16" to 1/8" in late winter/early spring (even now). We don't control humidity so winter indoor humidity runs around 30%. Those cracks will dissapear toward summer. |
#16
|
|||
|
|||
Go to www . rlcengineering . com (remove the spaces). Click on
"Technical Information, then Moisture & Hardwood Floors. The Engineer is Craig DeWitt, PhD, PE. He has lots of good information on installing hardwood floors and wood and moisture problems in general. Read his homeowner information also. He has a wealth of knowledge. All your questions will be answered. I think you need a new floor man also, he knows just enough to be dangerous. Stretch |
#18
|
|||
|
|||
On Fri, 8 Apr 2005 14:07:09 -0400, "jstp"
wrote: Yes, as long as you let the wood acclimatate in your house before installation. Length of acclimatation depends on humidity difference between wood and environment. I let mine stand inside for one week. There has been some yearly shrinking every winter but it's acceptable (less than 1/16 inch between some planks, none in most places). Pardon my ignorance but I have question about the acclimatization of the wood. The indoor humidity cannot be controlled precisely at the same level all year round. The house will be drier in the winter and less so in the summer. So if you aclimatise the wood in the summer, it'll still shrink in the winter and vice versa. It's not like we are flying the wood over from the Amazon rainforrest and install it right away. My question is, even if we do aclimitise the wood, it's still gonna shirnk in the winter and expand in the summer. As long as the humidity level is within a reasonable range, what difference is it gonna make? |
#19
|
|||
|
|||
|
#20
|
|||
|
|||
On 8 Apr 2005 23:17:35 -0700, "RicodJour"
wrote: So what's the deal with the contractor? Did you feel that he was pressuring you into having it done right away for reasons other than seasonal humidity timing? He mentioned it a bit at the end of the quote but I didn't go with him because his quote was higher. The species I am interested in is the Goodfellow Brazillian Teak (Cumaru), a very hard wood with a 10 coat polyurethen plus aluminium oxide finish. It's a dark wood so I guess it'll hide the gaps better than lighter wood. In addition, according to the research I've done, it should shrink about 50% less than Oak. I'm getting it in next week, acclimitise it for two weeks and install it before the end of the month. I was a bit nervous about this purchase because I am paying good money for it ($10K material and labour for the whole house). Friend of mind asked me why didn't I get the cheap Home Depot $1.99/sq ft Oak and save myself a bundle. No way I'm going to get those paper thin wood that cannot be refinished with a filmsy finish. And that once the wood goes down, it's probably not coming out for the rest of the life of the house. You might actually be spending more and getting less with those cheap wood. Thanks to the internet and guys like you from here, I'm getting quite comfortable with this purchase now and I think I have made the right decision. |
#21
|
|||
|
|||
On Sat, 09 Apr 2005 05:47:08 GMT, wrote:
My question is, even if we do aclimitise the wood, it's still gonna shirnk in the winter and expand in the summer. As long as the humidity level is within a reasonable range, what difference is it gonna make? Your observation is correct. The reason is because you want the finish floor and the subfloor you're fastening it to to have roughly the same moisture content so they'll expand/shrink together. The expansion/contraction may be tiny... less than 1/4" over a large room... but it's powerful enough to loosen nails and split the tongues. That's also why the finish floor should be acclimatized in the same room, or at least the same level of the house, where it will be laid. Steve Manes Brooklyn, NY http://www.magpie.com/house/bbs |
#22
|
|||
|
|||
On Sat, 09 Apr 2005 07:15:19 GMT, wrote:
Friend of mind asked me why didn't I get the cheap Home Depot $1.99/sq ft Oak and save myself a bundle. No way I'm going to get those paper thin wood that cannot be refinished with a filmsy finish. And that once the wood goes down, it's probably not coming out for the rest of the life of the house. You might actually be spending more and getting less with those cheap wood. Good thinking. Unfortunately, during my house renovation I've got too many war stories about buying cheap and paying for it heavily at the other end. The worst was a Jacuzzi I bought online and tile I got cheap at a contractors' salvage yard. That story is he http://www.magpie.com/house/bathroom.phtml And just to demonstrate that I don't learn from my own lessons, another one was just yesterday. I needed some wallpaper to finish off the guest room I'm building. I spent an afternoon hitting local wallcovering stores and the Borgs looking for something I liked which was also in stock. Nothing. I found a yellow pages ad for a store in Boro Park which claimed to have a million rolls in stock. As soon as I walked in the funky place, warning bells should have gone off. There were disorganized boxes of wallpaper all over, none of it with so much as a manufacturer's label. There was also a large pool of water on the floor in back from a leaky roof. The owner said it always happens after a heavy rain. After an hour, I found some prepasted stuff which was acceptable, feeling victorious about saving $5 over what I would have paid elsewhere. I hung it last night. This morning, it was curling up and falling off the wall. It's not like I haven't successfully hung a lot of wallpaper in my life. This stuff was damaged goods. I tested a piece and found that the paste was almost useless. In a side light you could see where some of it was dusting off. Then I thought about that pool of water and what the recurring humidity may have done to it. One of these days I'll learn the wisdom of "Cry Once", I hope. Steve Manes Brooklyn, NY http://www.magpie.com/house/bbs |
#23
|
|||
|
|||
Steve Manes wrote:
On Sat, 09 Apr 2005 05:47:08 GMT, wrote: My question is, even if we do aclimitise the wood, it's still gonna shirnk in the winter and expand in the summer. As long as the humidity level is within a reasonable range, what difference is it gonna make? Your observation is correct. The reason is because you want the finish floor and the subfloor you're fastening it to to have roughly the same moisture content so they'll expand/shrink together. The expansion/contraction may be tiny... less than 1/4" over a large room... but it's powerful enough to loosen nails and split the tongues. That's also why the finish floor should be acclimatized in the same room, or at least the same level of the house, where it will be laid. Not so. There's no way that a plywood subfloor is going to expand and contract like solid wood. The wood strip floor slides on top of the subfloor. This site has very complete information on the effect of moisture, strip size, way the wood was cut, etc. http://www.woodfloorsonline.com/tech...oodwater1.html R |
#24
|
|||
|
|||
On Sat, 09 Apr 2005 08:58:54 -0400, Steve Manes
wrote: Good thinking. Unfortunately, during my house renovation I've got too many war stories about buying cheap and paying for it heavily at the other end. I have a similar story to tell. I have had shoulder pain for the last couple of weeks. A few trips to a massage therapist didn't improve the situation much. One day I finally realized what was wrong with my shoulders. I've been painting my whole house in anticipation of new hardwood and carpet. My shoulder pain was the direct result of me hand sanding the walls. I had though about buying a $20 sander but thought I could save the $20 by hand sanding. So I finally broke down and bought a $20 electrical sander and the paint job went much faster and the shoulder pain disappeared. Even though my insurance covered my $200 massages but I still had to endure the pain and suffering for a few weeks. The worst was a Jacuzzi I bought online and tile I got cheap at a contractors' salvage yard. That story is he http://www.magpie.com/house/bathroom.phtml And just to demonstrate that I don't learn from my own lessons, another one was just yesterday. I needed some wallpaper to finish off the guest room I'm building. I spent an afternoon hitting local wallcovering stores and the Borgs looking for something I liked which was also in stock. Nothing. I found a yellow pages ad for a store in Boro Park which claimed to have a million rolls in stock. As soon as I walked in the funky place, warning bells should have gone off. There were disorganized boxes of wallpaper all over, none of it with so much as a manufacturer's label. There was also a large pool of water on the floor in back from a leaky roof. The owner said it always happens after a heavy rain. After an hour, I found some prepasted stuff which was acceptable, feeling victorious about saving $5 over what I would have paid elsewhere. I hung it last night. This morning, it was curling up and falling off the wall. It's not like I haven't successfully hung a lot of wallpaper in my life. This stuff was damaged goods. I tested a piece and found that the paste was almost useless. In a side light you could see where some of it was dusting off. Then I thought about that pool of water and what the recurring humidity may have done to it. One of these days I'll learn the wisdom of "Cry Once", I hope. Steve Manes Brooklyn, NY http://www.magpie.com/house/bbs |
#25
|
|||
|
|||
The rest of the house and the subfloor should shrink and expand at the
same rate as the wood floor. That is why you acclimate the wood flooring before you install it. If everything expands and contracts at the same rate, you should not have any problems. Stretch |
#26
|
|||
|
|||
stretch wrote:
The rest of the house and the subfloor should shrink and expand at the same rate as the wood floor. That is why you acclimate the wood flooring before you install it. If everything expands and contracts at the same rate, you should not have any problems. Everything expands and contracts at different rates, both based on temperature and on humidity. The same species of wood can have markedly different coefficients of expansion depending on whether the wood was flat or quarter sawn. http://tinyurl.com/4vbgy The plywood subfloor and finish flooring will not react to the changes in humidity in the same way at all. That's one of the major benefits of plywood - the cross grain limits the expansion and contraction. R |
#27
|
|||
|
|||
Plywood is cross grain for each layer it wont contract-expand the same
as plank, plank length will not shrink it is the width that shrinks . Floor instalers need a moisture meter to check the condition of the floor to the home as storage -shipping is where it will meet high humidity or wet conditions. It is also a matter of it being the proper moisture for a closed house during new construction and what it will be when heated and cooled. Without a moisture meter and tables it is a guess likely to fail. |
#28
|
|||
|
|||
On Sat, 09 Apr 2005 19:24:50 GMT, wrote:
One day I finally realized what was wrong with my shoulders. I've been painting my whole house in anticipation of new hardwood and carpet. My shoulder pain was the direct result of me hand sanding the walls. If you've got a long-running house renovation in progress, it probably won't be the first time you'll visit shoulder pain. I had it for months after building a pair of fences in 2001: http://www.magpie.com/house/photos/b...rd20040509.jpg Even though I used a framing nailer, the gun's still quite heavy. After driving several thousand nails the kickback gets to you, plus digging a few dozen post holes by hand didn't help. Fortunately, the neighbor who got the second fence is a chiropractor. I re-injured it last year after tripping over one of those BigBoxStore toilet paper packages in my shop and landing on the cement floor. That stopped work cold for six weeks. I had though about buying a $20 sander but thought I could save the $20 by hand sanding. So I finally broke down and bought a $20 electrical sander and the paint job went much faster and the shoulder pain disappeared. Yeah, that'll kill your shoulder, especially sanding ceilings. I still prefer to do this mostly by hand with a sanding block because of the dust that a power sander kicks up. What makes it worse is that my walls are old, neglected plaster so I elected to skim coat many of them after patching the cracks/holes. The finish work for that generates an unbelievable amount of dust. My local rental place has a power sander coupled to a shopvac-like device but I've never tried it. Steve Manes Brooklyn, NY http://www.magpie.com/house/bbs |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Time Delay RCDs | UK diy | |||
Making a hardwood curved stage | Woodworking | |||
hot water recirculator, instant hot water but not a water heating unit, saves water, gas, time, money | Home Repair | |||
Making a ruin into something habitable. | UK diy |