Home |
Search |
Today's Posts |
#1
|
|||
|
|||
using shims on milgard windows
i am installing milgard classic vinyl windows (nail fins).
to make sure that the window is level, i might have to add shims before nailing the bottom flange. can i place space shims between rough sill and the bottom of the window? will using shims here cause the window to sag? should the shims be placed only at the corners? once the window is square and nailed in place, can i remove all the shims? or should i just leave them alone or do i need to nail the shims as well? thank you in advance. |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Good manufacturer/Contractor to replace windows in a Condo in Queens, NY | Home Repair | |||
Good manufacturer/Contractor to replace windows in a Condo in Queens, NY | Home Ownership | |||
Newpro - Avoid them at ALL costs! | Home Ownership | |||
adding on to our house - which windows? | Home Ownership | |||
[OT] Car insurance craziness | UK diy |