Home Ownership (misc.consumers.house)

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
Tim Neumann
 
Posts: n/a
Default Would this work?

I have a problem. We have a whole house fan that we use this time of year
to cool the house. Last year we replace our gas water heater with a newer
model. Since then, I have learned the hard way that if there are not enough
windows open for the fan setting the fan will suck air down the chimney and
back through the water heater, blowing out the gas pilot in passing.
Currently, there are no dampers or anything in the vent stack. Would it
work to put one of those open when heated dampers in the vent stack to keep
the fan from blowing the pilot out?

I plan on checking the local ords as well, but would like to get some
opinions from the group as well.

Thanks in advance

Tim


  #2   Report Post  
for ronnie the christian capon who is afraid of to
 
Posts: n/a
Default Would this work?

In article ,
"Tim Neumann" wrote:

I have a problem. We have a whole house fan that we use this time of year
to cool the house. Last year we replace our gas water heater with a newer
model. Since then, I have learned the hard way that if there are not enough
windows open for the fan setting the fan will suck air down the chimney and
back through the water heater, blowing out the gas pilot in passing.
Currently, there are no dampers or anything in the vent stack. Would it
work to put one of those open when heated dampers in the vent stack to keep
the fan from blowing the pilot out?

I plan on checking the local ords as well, but would like to get some
opinions from the group as well.

Thanks in advance

Tim



Don't know where you live but I thought all new gas water heaters had
electronic ignition which eliminates pilot lights
  #3   Report Post  
Chuckles
 
Posts: n/a
Default Would this work?

wrote in
:


Don't know where you live but I thought all new gas water heaters had
electronic ignition which eliminates pilot lights


No, very few water heaters have electronic ignition. It makes no sense to
eliminate the pilot, because the water has to be kept hot, and the pilot
helps (slightly). If there is no pilot, then the burner has to stay on
(slightly) longer in each burner cycle, so no energy is saved.

A boiler (for hot water radiators) is a different situation, because the
water can be allowed to cool down when there is no call for heat. With a
water heater, people expect hot water whenever they open their taps, so the
water has to be kept hot.

  #4   Report Post  
for ronnie the christian capon who is afraid of to
 
Posts: n/a
Default Would this work?

In article m,
Chuckles wrote:

wrote in
:


Don't know where you live but I thought all new gas water heaters had
electronic ignition which eliminates pilot lights


No, very few water heaters have electronic ignition. It makes no sense to
eliminate the pilot, because the water has to be kept hot, and the pilot
helps (slightly). If there is no pilot, then the burner has to stay on
(slightly) longer in each burner cycle, so no energy is saved.

A boiler (for hot water radiators) is a different situation, because the
water can be allowed to cool down when there is no call for heat. With a
water heater, people expect hot water whenever they open their taps, so the
water has to be kept hot.


I was under the impression that electronic ignitions on gas water
heaters was a safety feature
  #5   Report Post  
Bill
 
Posts: n/a
Default Would this work?

Simple solution: Reverse the motor on the fan if possible so it is blowing
air in.


"Tim Neumann" wrote in message
I have a problem. We have a whole house fan that we use this time of

year
to cool the house. Last year we replace our gas water heater with a

newer
model. Since then, I have learned the hard way that if there are not

enough
windows open for the fan setting the fan will suck air down the chimney

and
back through the water heater, blowing out the gas pilot in passing.
Currently, there are no dampers or anything in the vent stack. Would it
work to put one of those open when heated dampers in the vent stack to

keep
the fan from blowing the pilot out?

I plan on checking the local ords as well, but would like to get some
opinions from the group as well.

Thanks in advance

Tim






  #6   Report Post  
Phil Munro
 
Posts: n/a
Default Would this work?

LOOKOUT! The problem is NOT the pilot light going out when you run
the fan. The problem is that you have a "tight" house, and the fan will
draw exhaust gas (read that carbon monoxide) down the chimney and into
the house.
I think the answer is to provide an air supply from outside the house
for your gas heater. --Phil

Tim Neumann wrote:
I have a problem. We have a whole house fan that we use this time of year
to cool the house. Last year we replace our gas water heater with a newer
model. Since then, I have learned the hard way that if there are not enough
windows open for the fan setting the fan will suck air down the chimney and
back through the water heater, blowing out the gas pilot in passing.
Currently, there are no dampers or anything in the vent stack. Would it
work to put one of those open when heated dampers in the vent stack to keep
the fan from blowing the pilot out?

I plan on checking the local ords as well, but would like to get some
opinions from the group as well.

Thanks in advance

Tim



--
Phil Munro Dept of Electrical & Computer Engin
Youngstown State University
Youngstown, Ohio 44555

  #7   Report Post  
Tim Neumann
 
Posts: n/a
Default Would this work?

I KNOW I have a 'tight' house. That is the root cause of the problem. Have
you ever tried to din into teenagers' heads anything that doesn't deal with
the opposite sex, hair, or clothes? What I am looking for is a fail-safe to
keep from having to relight the hot water heater pilot after I have found
out the hard way at the most inconvenient time that it was blown out again
by not having the windows open far enough.

"Phil Munro" wrote in message
...
LOOKOUT! The problem is NOT the pilot light going out when you run
the fan. The problem is that you have a "tight" house, and the fan will
draw exhaust gas (read that carbon monoxide) down the chimney and into
the house.
I think the answer is to provide an air supply from outside the house
for your gas heater. --Phil

Tim Neumann wrote:
I have a problem. We have a whole house fan that we use this time of

year
to cool the house. Last year we replace our gas water heater with a

newer
model. Since then, I have learned the hard way that if there are not

enough
windows open for the fan setting the fan will suck air down the chimney

and
back through the water heater, blowing out the gas pilot in passing.
Currently, there are no dampers or anything in the vent stack. Would it
work to put one of those open when heated dampers in the vent stack to

keep
the fan from blowing the pilot out?

I plan on checking the local ords as well, but would like to get some
opinions from the group as well.

Thanks in advance

Tim



--
Phil Munro Dept of Electrical & Computer Engin
Youngstown State University
Youngstown, Ohio 44555



  #8   Report Post  
Rod Speed
 
Posts: n/a
Default Would this work?


Tim Neumann wrote in
message ...

I KNOW I have a 'tight' house. That is the root cause of the
problem. Have you ever tried to din into teenagers' heads
anything that doesn't deal with the opposite sex, hair, or clothes?


Be careful, they'll be picking your nursing home.

What I am looking for is a fail-safe to keep from having
to relight the hot water heater pilot after I have found out
the hard way at the most inconvenient time that it was
blown out again by not having the windows open far enough.



"Phil Munro" wrote in message
...
LOOKOUT! The problem is NOT the pilot light going out when you run
the fan. The problem is that you have a "tight" house, and the fan will
draw exhaust gas (read that carbon monoxide) down the chimney and into
the house.
I think the answer is to provide an air supply from outside the house
for your gas heater. --Phil

Tim Neumann wrote:
I have a problem. We have a whole house fan that we use this time of

year
to cool the house. Last year we replace our gas water heater with a

newer
model. Since then, I have learned the hard way that if there are not

enough
windows open for the fan setting the fan will suck air down the chimney

and
back through the water heater, blowing out the gas pilot in passing.
Currently, there are no dampers or anything in the vent stack. Would it
work to put one of those open when heated dampers in the vent stack to

keep
the fan from blowing the pilot out?

I plan on checking the local ords as well, but would like to get some
opinions from the group as well.

Thanks in advance

Tim



--
Phil Munro Dept of Electrical & Computer Engin
Youngstown State University
Youngstown, Ohio 44555





  #9   Report Post  
for ronnie the christian capon who is afraid of to
 
Posts: n/a
Default Would this work?

In article ,
"Tim Neumann" wrote:

I KNOW I have a 'tight' house. That is the root cause of the problem. Have
you ever tried to din into teenagers' heads anything that doesn't deal with
the opposite sex, hair, or clothes? What I am looking for is a fail-safe to
keep from having to relight the hot water heater pilot after I have found
out the hard way at the most inconvenient time that it was blown out again
by not having the windows open far enough.


install an electronic ignition
Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Running a 220 receptacle to garage [email protected] Woodworking 18 May 5th 04 06:49 PM
Any Ideas For Organizing A Contractors Work Van? michael_m_MT Woodworking 4 March 18th 04 08:32 AM
Salary-VS-Hourly $ 15.00 hr (50 hrs+) Salary with bonus??? hard decision Kevin Wade Woodworking 37 October 20th 03 10:34 PM
Will 5C collet hold my work? Ed Metalworking 9 October 14th 03 06:03 AM
Moisture Cure Urethane (Moisture Cured Urethane) Moshe Woodworking 6 September 5th 03 05:50 PM


All times are GMT +1. The time now is 11:27 PM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 DIYbanter.
The comments are property of their posters.
 

About Us

"It's about DIY & home improvement"