Home Ownership (misc.consumers.house)

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
Posted to misc.consumers.house
 
Posts: n/a
Default raised floor insert for shower to bypass leak?

I just found out the shower in my 50-year-old house has been leaking
for a while; the shower is directly over an overhang so I found out
about the leak just recently when I saw water dripping from that
overhang outside. So the plywood from the subfloor down to that
overhang is rotted. The beams under the bathroom look ok, a little
black where they meet the plywood. The floor in the bathroom seems
solid structurally, no shifting tiles or cracks.

Option #1 for repair is to rip it all out and replace the bathroom, new

subfloor, probably choose a fiberglass shower instead of tile to avoid
having to caulk the seam of the tile to shower pan.


I was thinking maybe option #2 would be just to leave everything in
place and build an insert that would fit snugly in the existing shower,

caulked to the shower walls. This insert would have a slightly sloped
floor down to a central drain funnel, and the bottom of this funnel
would hang inside the existing drainpipe. This way, water would never
touch the shower pan or the joint between drainpipe and shower pan. (I

suspected the leak was at this joint between drainpipe and shower pan,
and sealed it with putty epoxy from Home Depot. When I watch from
below when the water's running in the shower, the outside of the
drainpipe was dripping before my fix and seems dry now, but there's
still water dripping from somewhere else.)
This insert would just be a wood platform on stilts sitting on the
shower floor, with this drain funnel in the middle, and with vinyl
laminate or something attached to the wood platform to protect this
wood from the water.


Any comments on option #2, or suggestions on other options? I'd really

rather not rip out
the bathroom. Thanks.

  #2   Report Post  
Posted to misc.consumers.house
v
 
Posts: n/a
Default raised floor insert for shower to bypass leak?

On 7 Jun 2006 04:46:56 -0700, someone wrote:

.....the plywood from the subfloor down to that
overhang is rotted. The beams under the bathroom look ok, a little
black....

I was thinking maybe option #2 would be just to leave everything in
place and build an insert that would fit snugly in the existing shower,

Fix it right. You'd leave rot in place because you're too lazy to do
a complete job? If you were a tenant and the landlord was proposing
this, folks would be jumping all over him for being a cheapskate.

My gosh, you have such an advantage that it's over an overhang and
not, apparently, (say) the kitchen. Fix it right.


Reply to NG only - this e.mail address goes to a kill file.
Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
raised floor insert for shower to bypass leak? [email protected] Home Repair 0 June 7th 06 12:43 PM
possible gas leak jhughes37 Home Repair 13 April 10th 05 05:12 PM
Water leak - the saga continues..... mich UK diy 13 August 25th 04 10:47 PM
Story & Info: Slab leak pipe repair Melbourne FL Brevard Co Rick Home Repair 0 September 3rd 03 01:18 AM
Mystery Bathroom Leak Billy Home Repair 12 August 17th 03 02:39 AM


All times are GMT +1. The time now is 08:33 PM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 DIYbanter.
The comments are property of their posters.
 

About Us

"It's about DIY & home improvement"