Home |
Search |
Today's Posts |
#1
|
|||
|
|||
very slow gas leak
I have a very slow gas leak in my house that I simply can't find.
The gas is leaking at a rate of 1.7 cubic feet per day (0.071 cubic feet per hour) as measured by the meter. I don't smell gas anywhere, and I have looked at (sniffed actually) every joint I could reach, and nothing. My question is how sensitive of a detector would I need in order to find this? I have seen detectors with ppm sensitivity ranging from 50 to 2000. Obviously price goes accordingly, how sensitive of a detector do I need? And realistically speaking, how bad of a leak is it? I know that any leak at all sounds scary, but a leak so slow that you can't smell it is not a fire hazard as far as I know, but it does waste gas. -Ariel |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Water leak - the saga continues..... | UK diy | |||
Story & Info: Slab leak pipe repair Melbourne FL Brevard Co | Home Repair | |||
Mystery Bathroom Leak | Home Repair | |||
Slow leak on compression joint - can't access stop cock | UK diy |