Home |
Search |
Today's Posts |
#1
Posted to alt.electronics
|
|||
|
|||
Garage door opener remote
Having bad luck trying to find the replacement remote for our Overhead Door
system, led me to try and adjust the quirky one giving trouble. It is a single button type with a tuning slug which I got working after spraying the board with Static solution for pc boards. The slug is rather loose and needs readjustment often not holding its position. Sometimes a sizeable turn is needed to get the damn thing to work. What would you think of putting a thread glue on it? Suggestions are welcome. -- Bill W. |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Garage door opener manual remote switch | Home Repair | |||
Sears (Chamberlain) Garage Door Opener Randomly Opening | Home Ownership | |||
Garage Supply - Spured off house sockets? | UK diy | |||
Building a garage above public sewer (UK) | UK diy | |||
Sears Garage Door Opener, Remote Keypad Problem | Home Repair |