Electronics (alt.electronics)

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
Craig Stadler
 
Posts: n/a
Default I need to hire an electronics engineer

I have a small personal project I need to hire an experienced electronics
engineer for..
It entails designing a circuit to interface with a visual/laser light show
type scenario from an analog signal.
The project is using galvanometers/laser and magnifying circuit or lens..

Email :
925-847-1598



  #2   Report Post  
John Fields
 
Posts: n/a
Default I need to hire an electronics engineer

On Tue, 11 Oct 2005 22:27:39 GMT, "Craig Stadler"
wrote:

I have a small personal project I need to hire an experienced electronics
engineer for..
It entails designing a circuit to interface with a visual/laser light show
type scenario from an analog signal.
The project is using galvanometers/laser and magnifying circuit or lens..

Email :
925-847-1598


--
John Fields
Professional Circuit Designer
  #3   Report Post  
John Fields
 
Posts: n/a
Default I need to hire an electronics engineer

On Wed, 12 Oct 2005 04:48:58 -0500, John Fields
wrote:

On Tue, 11 Oct 2005 22:27:39 GMT, "Craig Stadler"
wrote:

I have a small personal project I need to hire an experienced electronics
engineer for..
It entails designing a circuit to interface with a visual/laser light show
type scenario from an analog signal.
The project is using galvanometers/laser and magnifying circuit or lens..

Email :
925-847-1598


--
John Fields
Professional Circuit Designer


And then, on Wed, 12 Oct 2005 05:00:17 -0700, "Don" wrote:

I see you've cleaned up your language, John. That's nice because these
NGs are open to the public and I'm sure there are some high school kids
that read them. In fact I though you were a teen at the time.

There are also many adults that don't appreciate cursing either. The
other day a preacher entered a message here. Had this been a secure NG
such as the Netscape group we'd have both been blackballed for for such
language. I'm partially at fault here to and should have known better.


and I replied:
---
If you're interested in communicating with me do it via the
newsgroups and _not_ via my private email.

Rest assured that I don't give a **** what you think, what little
petty problems you may have regarding some stupid newsgroup that's
got you by the balls or whether preachers or kids hang out in the
newsgroups I frequent. I post the way I post and if you don't like
it you can kiss my ass, complain to my ISP, or plonk me.

BTW, I'm also posting this little exchange to alt.electronics, where
it belongs.

Do _not_ email me again.
Got it?


--
John Fields
Professional Circuit Designer
  #4   Report Post  
Don.
 
Posts: n/a
Default I need to hire an electronics engineer

John Fields wrote:
On Wed, 12 Oct 2005 04:48:58 -0500, John Fields
wrote:


On Tue, 11 Oct 2005 22:27:39 GMT, "Craig Stadler"
wrote:


I have a small personal project I need to hire an experienced electronics
engineer for..
It entails designing a circuit to interface with a visual/laser light show
type scenario from an analog signal.
The project is using galvanometers/laser and magnifying circuit or lens..

Email :
925-847-1598



--
John Fields
Professional Circuit Designer



And then, on Wed, 12 Oct 2005 05:00:17 -0700, "Don" wrote:


I see you've cleaned up your language, John. That's nice because these
NGs are open to the public and I'm sure there are some high school kids
that read them. In fact I though you were a teen at the time.

There are also many adults that don't appreciate cursing either. The
other day a preacher entered a message here. Had this been a secure NG
such as the Netscape group we'd have both been blackballed for for such
language. I'm partially at fault here to and should have known better.



and I replied:
---
If you're interested in communicating with me do it via the
newsgroups and _not_ via my private email.

Rest assured that I don't give a **** what you think, what little
petty problems you may have regarding some stupid newsgroup that's
got you by the balls or whether preachers or kids hang out in the
newsgroups I frequent. I post the way I post and if you don't like
it you can kiss my ass, complain to my ISP, or plonk me.

BTW, I'm also posting this little exchange to alt.electronics, where
it belongs.

Do _not_ email me again.
Got it?


Hehehe. If you think I'm playing with you...you're right. :-D

----== Posted via Newsfeeds.Com - Unlimited-Uncensored-Secure Usenet News==----
http://www.newsfeeds.com The #1 Newsgroup Service in the World! 120,000+ Newsgroups
----= East and West-Coast Server Farms - Total Privacy via Encryption =----
  #5   Report Post  
John Fields
 
Posts: n/a
Default I need to hire an electronics engineer

On Wed, 12 Oct 2005 15:39:59 -0700, "Don." wrote:

John Fields wrote:
On Wed, 12 Oct 2005 04:48:58 -0500, John Fields
wrote:


On Tue, 11 Oct 2005 22:27:39 GMT, "Craig Stadler"
wrote:


I have a small personal project I need to hire an experienced electronics
engineer for..
It entails designing a circuit to interface with a visual/laser light show
type scenario from an analog signal.
The project is using galvanometers/laser and magnifying circuit or lens..

Email :
925-847-1598



--
John Fields
Professional Circuit Designer



And then, on Wed, 12 Oct 2005 05:00:17 -0700, "Don" wrote:


I see you've cleaned up your language, John. That's nice because these
NGs are open to the public and I'm sure there are some high school kids
that read them. In fact I though you were a teen at the time.

There are also many adults that don't appreciate cursing either. The
other day a preacher entered a message here. Had this been a secure NG
such as the Netscape group we'd have both been blackballed for for such
language. I'm partially at fault here to and should have known better.



and I replied:
---
If you're interested in communicating with me do it via the
newsgroups and _not_ via my private email.

Rest assured that I don't give a **** what you think, what little
petty problems you may have regarding some stupid newsgroup that's
got you by the balls or whether preachers or kids hang out in the
newsgroups I frequent. I post the way I post and if you don't like
it you can kiss my ass, complain to my ISP, or plonk me.

BTW, I'm also posting this little exchange to alt.electronics, where
it belongs.

Do _not_ email me again.
Got it?


Hehehe. If you think I'm playing with you...you're right. :-D

----== Posted via Newsfeeds.Com - Unlimited-Uncensored-Secure Usenet News==----
http://www.newsfeeds.com The #1 Newsgroup Service in the World! 120,000+ Newsgroups
----= East and West-Coast Server Farms - Total Privacy via Encryption =----


--
John Fields
Professional Circuit Designer


  #6   Report Post  
John Fields
 
Posts: n/a
Default I need to hire an electronics engineer

On Wed, 12 Oct 2005 15:39:59 -0700, "Don." wrote:


Hehehe. If you think I'm playing with you...you're right. :-D


---
Actually, troll wannabe, you're playing with yourself.

--
John Fields
Professional Circuit Designer
Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
CAX, CAD, CAM, CAE, electronics, EDA, LSI, PCB, FPGA, VHDL, & Other Design CDs ::::::: , updated 28/Mar/2005 futa Metalworking 1 April 1st 05 07:36 AM
CAX, CAD, CAM, CAE, electronics, EDA, LSI, PCB, FPGA, VHDL, & Other Design CDs ::::::: , updated 03/Feb/2005 futa Metalworking 0 February 5th 05 06:13 PM
CAX,CAD,CAM,CAE,electronics,EDA.LSI,PCB,FPGA,VHDL,&Other Design CDs ::::::: , updated 12/Jan/2005 ola Electronics Repair 0 January 14th 05 03:05 PM
Understanding Engineers GeoffH Metalworking 14 October 9th 03 02:18 PM
Looking for an Electronics Components Engineer near Los Angeles, CA Adrian Mongeli Electronics 0 June 25th 03 04:21 AM


All times are GMT +1. The time now is 09:09 AM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 DIYbanter.
The comments are property of their posters.
 

About Us

"It's about DIY & home improvement"