Home |
Search |
Today's Posts |
|
Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
HP1740A Repair
Traces comes on full bright and intensity control has little affect.
Manual indicates ther should be .4V on pin 3 of U1 but I get -.61V. Pin 7 reads -.176V which baffles me as the schematic shows 3 and 7 shorted together. My thinking is that U1 is bad. Any thoughts? Thanks much. Ron Raleigh, NC |
#2
|
|||
|
|||
"ronspencer" wrote in message
... Traces comes on full bright and intensity control has little affect. Manual indicates ther should be .4V on pin 3 of U1 but I get -.61V. Pin 7 reads -.176V which baffles me as the schematic shows 3 and 7 shorted together. My thinking is that U1 is bad. Any thoughts? Thanks much. Ron Raleigh, NC According to my 1740A manual and U1 pin 7 is +15V and pin 3 is non-inv i/p electronic hints and repair briefs , schematics/manuals list on http://homepages.tcp.co.uk/~diverse |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
GE refrigerator warranty repair misery | Home Ownership | |||
Computerized replacement for the NARDA 515 Electronics Repair Form ? | Electronics Repair | |||
Gouged on repair part by appliance repair company? | Home Repair | |||
LaserDisc Repair? | Electronics Repair | |||
Is this Home Repair or not | Home Repair |