Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems.

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
Junior Member
 
Posts: 1
Cool Toshiba CF32c50

Had Horz white line in center of tv replaced Horz output worked for two days. Also after replacing Horz out when turning on tv it would have black bars in upper and lower part of screen and a fuzzy white line in middle with a picture and sound. About 30 sec the picture would pop in and work fine lines gone and fuzz. Now it is back to Horz white line. I am thinking Yoke problem. Any other Ideas out there, and thanks
  #2   Report Post  
 
Posts: n/a
Default

From your posting, you do not have enough of an idea of what is going
on to proceed any further.

The vertical deflection circuit needs troubleshot and repaired.

  #3   Report Post  
kip
 
Posts: n/a
Default

Horizontal is vertical
Vertical is Horizontal
Believe it
"Rat14579man" wrote in message
...

Had Horz white line in center of tv replaced Horz output worked for two
days. Also after replacing Horz out when turning on tv it would have
black bars in upper and lower part of screen and a fuzzy white line in
middle with a picture and sound. About 30 sec the picture would pop in
and work fine lines gone and fuzz. Now it is back to Horz white line. I
am thinking Yoke problem. Any other Ideas out there, and thanks


--
Rat14579man



  #4   Report Post  
Jerry G.
 
Posts: n/a
Default

This sounds like you have your H's and V's mixed up!

The vertical deflection circuit has to be troubleshooted to find the cause
of the vertical output failure. Simply replacing it is not the proper
answer. There may be defective capacitors, and or other components as well.

I would suggest you give the set out for proper service. To service these
types of problems takes a lot of experience and the proper service set-up to
troubleshoot the set.

--

Jerry G.
=====

"Rat14579man" wrote in message
...

Had Horz white line in center of tv replaced Horz output worked for two
days. Also after replacing Horz out when turning on tv it would have
black bars in upper and lower part of screen and a fuzzy white line in
middle with a picture and sound. About 30 sec the picture would pop in
and work fine lines gone and fuzz. Now it is back to Horz white line. I
am thinking Yoke problem. Any other Ideas out there, and thanks


--
Rat14579man


Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Sony SBX1637 on Toshiba CF32C50 Bob Electronics Repair 1 July 3rd 04 04:20 AM
ICs for Sale - Specials, obsolete and Memory The Photographer Electronics Repair 0 June 3rd 04 11:40 PM
ICs for Sale - Specials, obsolete and Memory Kristy Electronics Repair 2 April 14th 04 04:24 AM
Toshiba TV mod. CF32C50, Ch. TAC9323 audio problems Lenny Electronics Repair 3 March 11th 04 07:40 PM
Toshiba CF32C50 Audio Problem Ralph Electronics Repair 1 February 14th 04 05:30 PM


All times are GMT +1. The time now is 03:09 PM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 DIYbanter.
The comments are property of their posters.
 

About Us

"It's about DIY & home improvement"