Home |
Search |
Today's Posts |
|
Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
Zenith SY3538RK Color TV - Need Service Manual - Won't stay on
I'm looking for a service manual for a Zenith SY3538RK color TV.
This is a large console model, about 5 years old, with a 35 (or36) inch direct-view CRT. It comes on when it wants to, but usually just clicks on-then-off. When it does come on, the horizontal size is too small (and sometimes unstable), then it may either shut itself off, or "warm up", and keep going just fine until it gets turned off again and cools down. Thanks for any info you might have! |
#2
|
|||
|
|||
These sets were normally serviced by replacing the individual circuit
modules. Probably still available from Zenith or Via PTS Electronics. Actual Service manual probably from Sams Photofact or on Micti Fische from Zenith. Best to check th e tube quality before dumping too much time or funds into it. "Orange" wrote in message ps.com... I'm looking for a service manual for a Zenith SY3538RK color TV. This is a large console model, about 5 years old, with a 35 (or36) inch direct-view CRT. It comes on when it wants to, but usually just clicks on-then-off. When it does come on, the horizontal size is too small (and sometimes unstable), then it may either shut itself off, or "warm up", and keep going just fine until it gets turned off again and cools down. Thanks for any info you might have! |
#3
|
|||
|
|||
On 4 Feb 2005 19:03:30 -0800, "Orange" wrote:
I'm looking for a service manual for a Zenith SY3538RK color TV. This is a large console model, about 5 years old, with a 35 (or36) inch direct-view CRT. It comes on when it wants to, but usually just clicks on-then-off. When it does come on, the horizontal size is too small (and sometimes unstable), then it may either shut itself off, or "warm up", and keep going just fine until it gets turned off again and cools down. Probably a bad capacitor in the power supply. Also, check the board for poor connections and resolder as necessary. Alan Harriman Thanks for any info you might have! |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Panasonic Z-Mech service manual wanted | Electronics Repair | |||
Woods 5210 mower service manual source | Metalworking | |||
Schematic or service manual for LG TV | Electronics Repair | |||
Sony KLV-15SR1 US/Canada Version Service Manual Incomplete? | Electronics Repair | |||
Annual HVAC Service contracts. | Home Repair |