Home |
Search |
Today's Posts |
|
Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
Shut down problem
Have a CTC133b that will sometime come on for about 5 minutes the turn off.
You can here the power supply trying to work if you retry to power it up again. I havn't worked on this model for years and can only recall some info about it. Also do you know of an available diamgram for this model Thanks Bob K |
#2
|
|||
|
|||
RobertK wrote: Have a CTC133b that will sometime come on for about 5 minutes the turn off. You can here the power supply trying to work if you retry to power it up again. I havn't worked on this model for years and can only recall some info about it. Also do you know of an available diamgram for this model Thanks Bob K resolder CR402 off of T-101. If this doesn't do it, check other Caps solder connections, from the tuner, and in the power supply. |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Water Pump / Pressure Tank Problem !!!!!! | Home Repair | |||
AV problem with philips 32PW6005 | Home Repair | |||
Wiring problem | Home Repair | |||
Problem with retrace lines on EIZO F55S... | Electronics Repair | |||
CRT Contrast Problem | Electronics Repair |