Home |
Search |
Today's Posts |
![]() |
|
Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems. |
|
LinkBack | Thread Tools | Display Modes |
#9
![]() |
|||
|
|||
![]() "William R. Walsh" wrote in message news:csard.423959$wV.227127@attbi_s54... Hi! I have seen some Tripp-Lite NetUPS (?) units that have an external plug for an external battery. Theoretically, if you could get the connectors and do a safe job of wiring them in and mouting them in the case, any UPS could have the ability to accept an external battery. I've usually been served well by UPS units that I picked up for free with dead batteries inside. I just wire a large battery up and fashion a wooden case or shelf for the entire unit and go from there. I've never had any problems with doing so, but I would recommend supervising a newly converted UPS to be sure it will operate correctly. Most recently I got some BIG sealed gel-cell batteries that were almost new from a big old Tripp-Lite UPS that blew its top in a big and smoky way. I used them for a backup lighting system--a small APC UPS is wired to one of the two batteries and then plugged into two 60 watt lamps. It's enough to get out of a dark basement when the lights go off at night. http://greyghost.dyndns.org/ups.jpg - 62.8 KB / 1024x768 William If you can run two 60 watt lamps you could light your whole house with compact fluorescent bulbs, even the ones equivilant to a 100W bulb use only about 25W. |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
hacking radio shack zip zaps cars? | Electronics Repair |