Home |
Search |
Today's Posts |
|
Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems. |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
GE TV model 27GT616, Ch. CTC 185AB3 intermittent
The customer said that the set was dead. When I tried it the first
time it came right on. So I checked it for cold solder and although I saw nothing obvious, I soldered anything that looked remotely suspicious. I then ran the set for 10 hours over night and it stayed on and looked fine. The following morning I powered down for a while and tried it several times during the day and it came on fine each time until finally it would not. I have not reopened it yet but there is no click or anything when power is pressed. During resoldering I did remove the tuner shield and hit a couple of connections but none really seemed bad. This chassis has a different tuner shield assembly than the infamous older ones anyway. Does anyone know if there is any history of these power symptoms associated with this chassis? Thanks, Lenny Stein, Barlen Electronics. |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
How do I find the Model No to Proscan 27" TV? need manual | Electronics Repair | |||
RCA Projection Model P61830BL Intermittent Turn ON | Electronics Repair | |||
old BOGEN model C60 PA | Electronics Repair | |||
TV Remote Control rubber pad(UR50CT1071) used in remote control for Panasonic TV Model TX-29GF10X | Electronics Repair | |||
Blue Ridge Machinery model engines | Metalworking |