Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems.

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
Mike Kennedy
 
Posts: n/a
Default LCD- PannelLink / DVI Question???

Does anybody have an idea how i can get the pinout for the 20pin pannel link
connector on my LCD display? I plan on hooking it up to the dvi port on the
back of my computer, but I cant find the pinout for this controler card. It
has a SiI151 CT100 controler chip on it, and I found the schematics for the
151 at Silicon Image's web site. So do you think this is plausable to pin it
out with an ohm meter??

- Mike


---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.742 / Virus Database: 495 - Release Date: 8/19/04


  #2   Report Post  
Mike Kennedy
 
Posts: n/a
Default

oh by the way it is a Hyundai HT15x11-100 with a SiI151 PanelLink Controler
card. It came out of an IBM Netvista computer.


"Mike Kennedy" wrote in message
link.net...
Does anybody have an idea how i can get the pinout for the 20pin pannel

link
connector on my LCD display? I plan on hooking it up to the dvi port on

the
back of my computer, but I cant find the pinout for this controler card.

It
has a SiI151 CT100 controler chip on it, and I found the schematics for

the
151 at Silicon Image's web site. So do you think this is plausable to pin

it
out with an ohm meter??

- Mike


---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.742 / Virus Database: 495 - Release Date: 8/19/04




---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.742 / Virus Database: 495 - Release Date: 8/20/04


Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Replacement mortar question Paul Home Repair 8 December 2nd 03 01:18 PM
chemistry question Grant Erwin Metalworking 44 November 3rd 03 05:41 AM
Pipe thread question, NPT vs NPSF, MIP, FIP and IPS Jeff Wisnia Metalworking 1 August 9th 03 04:20 AM
Question about possible 'floating neutral' donald girod Home Repair 1 June 30th 03 03:47 AM


All times are GMT +1. The time now is 02:51 AM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 DIYbanter.
The comments are property of their posters.
 

About Us

"It's about DIY & home improvement"