Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems.

 
 
LinkBack Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
  #1   Report Post  
Barry S.
 
Posts: n/a
Default TV RF Section Failure?

My RCA TV appears to have "lost" some channels.

Most channels are OK. Cable Channels 48, 49, 50 are wiped out.
Channel 65/66 experiences intereference from over the air channel 14..
Other channels that I know I should get seem to be ok, including those
that might be effected by other OTA channels. RCA input video is ok
so I surmise it's an RF problem.

Here is the RF section:

http://www.mailsack.org/tvrf.jpg

Is there a way to open it, service it, replace (guess I could desolder
it), tune it, etc?

Thanks!

__________________
Note: To reply, replace the word 'spam' embedded in return address with 'mail'.
N37.3 W122.0
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Consequent-pole Two-speed Motor Controls - Was: (Something Else) Peter H Metalworking 3 February 21st 04 04:37 AM
Friend Blames Me for House Fire indago Home Repair 47 January 14th 04 11:27 AM
21" monitor with FIMI chassis C2182DAS and High Voltage failure JSP Electronics Repair 0 July 12th 03 02:37 PM


All times are GMT +1. The time now is 01:41 AM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 DIYbanter.
The comments are property of their posters.
 

About Us

"It's about DIY & home improvement"