 |
|
| Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems. |
|
|
LinkBack | Thread Tools | Display Modes |
|
#5
Posted to sci.electronics.repair
|
|||
|
|||
Cable Repair
On 14/03/2017 17:28, OOO wrote:
USB Phone cord. Molded connectors. At phone end, cable cracked all around at end of strain relief. Interior wires are OK. Cannot get shrink tube over connectors of correct size to facilitate repair. What is the best way to repair this? Trying to keep at least 2/3 of strain relief at connector flexible. hotmelt glue roughly wrapped around, when cooled , heatshrink sleeving over connector and cord and reheat ,then cut away surplus ooze when cool |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| KDS rad-7gs powered vga cable repair | Electronics Repair | |||
| Phone cable repair | Home Repair | |||
| Help - tricky PC cable repair | Electronics Repair | |||
| LCD ribbon cable repair methods? | Electronics Repair | |||
| Sony SW-100 ribbon cable repair | Electronics Repair | |||
Threaded Mode
