Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems.

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
TA7205
 
Posts: n/a
Default Awia Audio System- Need Schematic

Howdy;

I'm working on an Awia CX-NDS15U CD/Tape/Reciever entertainment
system.

The problem is, System will run fine with the volume all the way
down. if you increase the vol. above 12, the unit powers down within
3 seconds.

You have to wait about a minute before she'll let you turn it on again.

It may run a while longer at lower volumes (I ran it for 1/2 hr without
a shutdown at volume 5)

Does not matter if speakers are in circuit or not. It behaves the same.

There are 2 2SB1370's on the main heatsink that get hot quickly.
If I spray them with freeze the unit will keep running until the heat up
again.

I really need a schemo on this to see what these 2 guys do.
Their collectors and emitters are are paralelled together.

I've check for bad or leaky components on that board, but have turned
up nothing. The owner's hot for having his stereo back, so I'd appreaciate
any help with this unit.

Much thanks,
Rick
  #2   Report Post  
Mark D. Zacharias
 
Posts: n/a
Default Awia Audio System- Need Schematic

Damn. Now if only someone would make some Aiwa PDF's available.....

Mark Z.

--
Please reply only to Group. I regret this is necessary. Viruses and spam
have rendered my regular e-mail address useless.


"TA7205" wrote in message
...
Howdy;

I'm working on an Awia CX-NDS15U CD/Tape/Reciever entertainment
system.

The problem is, System will run fine with the volume all the way
down. if you increase the vol. above 12, the unit powers down within
3 seconds.

You have to wait about a minute before she'll let you turn it on again.

It may run a while longer at lower volumes (I ran it for 1/2 hr without
a shutdown at volume 5)

Does not matter if speakers are in circuit or not. It behaves the same.

There are 2 2SB1370's on the main heatsink that get hot quickly.
If I spray them with freeze the unit will keep running until the heat up
again.

I really need a schemo on this to see what these 2 guys do.
Their collectors and emitters are are paralelled together.

I've check for bad or leaky components on that board, but have turned
up nothing. The owner's hot for having his stereo back, so I'd appreaciate
any help with this unit.

Much thanks,
Rick



Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Tape deck has no audio output (Technics RS-TR373) Omi Chandiramani Electronics Repair 8 April 14th 07 09:17 PM
Modification to central heating system. Chaz Packer UK diy 3 March 12th 04 07:37 PM
Sony KV27TS29 (Audio) Charlie East Electronics Repair 12 July 26th 03 04:08 AM
mains Hot water, and do I convert open heating to a closed heating system Ian Tracey UK diy 5 July 18th 03 09:55 AM


All times are GMT +1. The time now is 08:54 PM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 DIYbanter.
The comments are property of their posters.
 

About Us

"It's about DIY & home improvement"