Hi All:

I've got an NEC FE700 17' flat screen CRT monitor I'm working on. It runs
OK except for a problem with the horizontal performance. The width of the
screen is a little narrower than it should be ( 3/8" black border ). The
width is set to 100%, but it still seems like too little. Also - the left &
right edges have poor geometry - they pincushion in on the upper 1/2 of the
screen, out on the lower half. I can adjust most of it out, but something
is definitely not right with it. I also noticed that if a smaller window
is opened on the screen it has the same pinned edges - in if it is the upper
half of the screen, out if it is in the lower half.

This seems like it could be a nice monitor and is worth the effort to fix.
Any thoughts on what might be causing this. Any advice appreciated