Home |
Search |
Today's Posts |
|
Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems. |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
Daewoo 28" HOT problem
Daewoo 28" model DTL-28G7, chassis CP775 (probably). Problem is the
HOT (2SD1880) gets very hot during operation and blows after one hour. Flyback pulse and base drive waveforms looks ok. The set works just perfect with no indications for something wrong. Any advice or schematic is appreciated. Best regards Stefan |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Boiler Problem Gradually Getting Worse | UK diy | |||
High voltage problem with JVC AV27BP4 TV | Electronics Repair | |||
CRT Contrast Problem | Electronics Repair | |||
Sears air compressor starting problem | Woodworking |