Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems.

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
Sidney
 
Posts: n/a
Default 48" RCA projection tv model:PJR500SR no video

48" RCA projection tv model:PJR500SR,chassis:Hitachi # VP3X,year:March
1983.The tv has audio,and from time to time the picture comes in and
it is perfect so I know that the three crt's and their Glycol Ethylene
coolants are fine,but when the picture is absent there is no video so
I don't know if the problem is HV or video related.
I looked everywheres for common repair tips but found none,I have not
yet gone to the customers house but would like to know which part/s
are defective before I head there.
I don't usually do service calls nor do I usually repair projection
tv's but my car requires serious frame and body work so a customer of
mine decided to trade services at my request so I am purchasing the
parts for the tv and my car,hence my lack of technical detail of
measurements taken and the like.
I appreciate your responses.
Sidney
E-mail:sidneybekyahoo.com
  #2   Report Post  
David
 
Posts: n/a
Default 48" RCA projection tv model:PJR500SR no video

Set probably has a bad ceramic horizontal/vertical module. This was a very
common failure and the symptom fits. Part has not been available for around
10 years. You might be able to confirm this by carefully tapping on the
module.

It is nearly impossible to resolder on the module due to the heatsinking
capabilities of the substrate without damaging the components.

David

Sidney wrote in message
om...
48" RCA projection tv model:PJR500SR,chassis:Hitachi # VP3X,year:March
1983.The tv has audio,and from time to time the picture comes in and
it is perfect so I know that the three crt's and their Glycol Ethylene
coolants are fine,but when the picture is absent there is no video so
I don't know if the problem is HV or video related.
I looked everywheres for common repair tips but found none,I have not
yet gone to the customers house but would like to know which part/s
are defective before I head there.
I don't usually do service calls nor do I usually repair projection
tv's but my car requires serious frame and body work so a customer of
mine decided to trade services at my request so I am purchasing the
parts for the tv and my car,hence my lack of technical detail of
measurements taken and the like.
I appreciate your responses.
Sidney
E-mail:sidneybekyahoo.com



  #3   Report Post  
Bill Jr
 
Posts: n/a
Default 48" RCA projection tv model:PJR500SR no video

The module, if needed, is still available and in stock at
www.tritronicsinc.com
Hitachi Part number is 2370542 (HM7052)

Usually, however, replacing the caps around that module will usually result
in a successful repair. There will also be quite a few old dried out caps in
the power supply as well as the deflection/high voltage circuits in need of
replacement.

Good Luck,
Bill Jr




"David" wrote in message
...
Set probably has a bad ceramic horizontal/vertical module. This was a

very
common failure and the symptom fits. Part has not been available for

around
10 years. You might be able to confirm this by carefully tapping on the
module.

It is nearly impossible to resolder on the module due to the heatsinking
capabilities of the substrate without damaging the components.

David

Sidney wrote in message
om...
48" RCA projection tv model:PJR500SR,chassis:Hitachi # VP3X,year:March
1983.The tv has audio,and from time to time the picture comes in and
it is perfect so I know that the three crt's and their Glycol Ethylene
coolants are fine,but when the picture is absent there is no video so
I don't know if the problem is HV or video related.
I looked everywheres for common repair tips but found none,I have not
yet gone to the customers house but would like to know which part/s
are defective before I head there.
I don't usually do service calls nor do I usually repair projection
tv's but my car requires serious frame and body work so a customer of
mine decided to trade services at my request so I am purchasing the
parts for the tv and my car,hence my lack of technical detail of
measurements taken and the like.
I appreciate your responses.
Sidney
E-mail:sidneybekyahoo.com






  #4   Report Post  
David
 
Posts: n/a
Default 48" RCA projection tv model:PJR500SR no video

Double checked Tritronics as we tried to order one late last year and
they came back with NLA. Tritronics web site shows NLA even now.

David

"Bill Jr" wrote in message om...
The module, if needed, is still available and in stock at
www.tritronicsinc.com
Hitachi Part number is 2370542 (HM7052)

Usually, however, replacing the caps around that module will usually result
in a successful repair. There will also be quite a few old dried out caps in
the power supply as well as the deflection/high voltage circuits in need of
replacement.

Good Luck,
Bill Jr




"David" wrote in message
...
Set probably has a bad ceramic horizontal/vertical module. This was a

very
common failure and the symptom fits. Part has not been available for

around
10 years. You might be able to confirm this by carefully tapping on the
module.

It is nearly impossible to resolder on the module due to the heatsinking
capabilities of the substrate without damaging the components.

David

Sidney wrote in message
om...
48" RCA projection tv model:PJR500SR,chassis:Hitachi # VP3X,year:March
1983.The tv has audio,and from time to time the picture comes in and
it is perfect so I know that the three crt's and their Glycol Ethylene
coolants are fine,but when the picture is absent there is no video so
I don't know if the problem is HV or video related.
I looked everywheres for common repair tips but found none,I have not
yet gone to the customers house but would like to know which part/s
are defective before I head there.
I don't usually do service calls nor do I usually repair projection
tv's but my car requires serious frame and body work so a customer of
mine decided to trade services at my request so I am purchasing the
parts for the tv and my car,hence my lack of technical detail of
measurements taken and the like.
I appreciate your responses.
Sidney
E-mail:sidneybekyahoo.com




Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
NTSC-compatible video signal circuit - ntsc.pdf (0/1) Rico Rivera Electronics 1 April 13th 04 06:57 PM
Non-huge parliament or projection hinge: exists? Michael Brewer UK diy 1 March 26th 04 06:08 PM
A Video for Beginners (a bit long) Fred Holder Woodturning 1 September 30th 03 09:37 PM
RCA Model P46732BA (Chassis PTK 169 PGA) Projection TV- No Video Mike Electronics Repair 1 August 4th 03 04:29 PM
Sony KV-32V16 : Loses VIDEO , repeats erratic Russ Wright Electronics Repair 2 August 2nd 03 02:58 AM


All times are GMT +1. The time now is 12:06 PM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 DIYbanter.
The comments are property of their posters.
 

About Us

"It's about DIY & home improvement"