Home |
Search |
Today's Posts |
|
Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to sci.electronics.repair
|
|||
|
|||
Fast acting fuses
I have a pair of JBL model CF120 speakers. Yesterday while listening to the system a ground wire came loose and the next thing I realized the right woofer was out. These speakers are protected by a couple of TC 2.5A fuses. One of these fuses screws into a threaded holder, (and it was open) and the other clips into a two prong connector. Since I didn't have a small size TC fuse I swapped the good fuse into the threaded holder and I soldered, (piggy backed) a 2.5A AGC type with pigtails onto the open TC fuse and clipped it back into the socket.
So the TC fuse indeed protected the speaker, and I'm very grateful for that.. I fixed the ground problem and until I can pick up the correct fuses this will work. However I was wondering if this TC type fuse is anything special? They are two different physical sizes but how does it compare electrically with an AGC type? In theory would AGC fuses be adequate protection for these speakers? I have boxes of them. One interesting thing I thought I'd mention was that coming right out of each speaker output on the amplifier there is a 2 amp MDX fuse that never opened. I know that the MDX is some type of time delay. Don't even know why that was in there. I would appreciate any comments on this. Thanks, Lenny |
#2
Posted to sci.electronics.repair
|
|||
|
|||
Fast acting fuses
wrote:
I have a pair of JBL model CF120 speakers. Yesterday while listening to the system a ground wire came loose and the next thing I realized the right woofer was out. These speakers are protected by a couple of TC 2.5A fuses. One of these fuses screws into a threaded holder, (and it was open) and the other clips into a two prong connector. Since I didn't have a small size TC fuse I swapped the good fuse into the threaded holder and I soldered, (piggy backed) a 2.5A AGC type with pigtails onto the open TC fuse and clipped it back into the socket. So the TC fuse indeed protected the speaker, and I'm very grateful for that. I fixed the ground problem and until I can pick up the correct fuses this will work. However I was wondering if this TC type fuse is anything special? They are two different physical sizes but how does it compare electrically with an AGC type? In theory would AGC fuses be adequate protection for these speakers? I have boxes of them. One interesting thing I thought I'd mention was that coming right out of each speaker output on the amplifier there is a 2 amp MDX fuse that never opened. I know that the MDX is some type of time delay. Don't even know why that was in there. I would appreciate any comments on this. Thanks, Lenny ** JBL say the CF120 uses a 2.5 amp slo-blo fuse. MDX are obsolete and replaced by MDL. Lots of other options exist using T or TT fuses. AGC is a fast type, same a F types and will bow too easily. .... Phil |
#3
Posted to sci.electronics.repair
|
|||
|
|||
Fast acting fuses
On 02/27/2015 6:26 PM, Phil Allison wrote:
wrote: I have a pair of JBL model CF120 speakers. Yesterday while listening to the system a ground wire came loose and the next thing I realized the right woofer was out. These speakers are protected by a couple of TC 2.5A fuses. One of these fuses screws into a threaded holder, (and it was open) and the other clips into a two prong connector. Since I didn't have a small size TC fuse I swapped the good fuse into the threaded holder and I soldered, (piggy backed) a 2.5A AGC type with pigtails onto the open TC fuse and clipped it back into the socket. So the TC fuse indeed protected the speaker, and I'm very grateful for that. I fixed the ground problem and until I can pick up the correct fuses this will work. However I was wondering if this TC type fuse is anything special? They are two different physical sizes but how does it compare electrically with an AGC type? In theory would AGC fuses be adequate protection for these speakers? I have boxes of them. One interesting thing I thought I'd mention was that coming right out of each speaker output on the amplifier there is a 2 amp MDX fuse that never opened. I know that the MDX is some type of time delay. Don't even know why that was in there. I would appreciate any comments on this. Thanks, Lenny ** JBL say the CF120 uses a 2.5 amp slo-blo fuse. MDX are obsolete and replaced by MDL. Lots of other options exist using T or TT fuses. AGC is a fast type, same a F types and will bow too easily. .... Phil Here is a little page I wrote on fuses if anyone is interested: https://www.flippers.com/fuses.html Nothing on Polys though. Should update it I guess... John :-#)# -- (Please post followups or tech inquiries to the newsgroup) John's Jukes Ltd. 2343 Main St., Vancouver, BC, Canada V5T 3C9 (604)872-5757 or Fax 872-2010 (Pinballs, Jukes, Video Games) www.flippers.com "Old pinballers never die, they just flip out." |
#4
Posted to sci.electronics.repair
|
|||
|
|||
Fast acting fuses
On Friday, February 27, 2015 at 2:37:58 PM UTC-5, wrote:
I have a pair of JBL model CF120 speakers. Yesterday while listening to the system a ground wire came loose and the next thing I realized the right woofer was out. These speakers are protected by a couple of TC 2.5A fuses. One of these fuses screws into a threaded holder, (and it was open) and the other clips into a two prong connector. Since I didn't have a small size TC fuse I swapped the good fuse into the threaded holder and I soldered, (piggy backed) a 2.5A AGC type with pigtails onto the open TC fuse and clipped it back into the socket. So the TC fuse indeed protected the speaker, and I'm very grateful for that. I fixed the ground problem and until I can pick up the correct fuses this will work. However I was wondering if this TC type fuse is anything special? They are two different physical sizes but how does it compare electrically with an AGC type? In theory would AGC fuses be adequate protection for these speakers? I have boxes of them. One interesting thing I thought I'd mention was that coming right out of each speaker output on the amplifier there is a 2 amp MDX fuse that never opened. I know that the MDX is some type of time delay. Don't even know why that was in there. I would appreciate any comments on this. Thanks, Lenny Thank you for including that page John and also the links. So I'm guessing as Phil has said that the AGC fuse will be the quickest to open, and may be somewhat of a nuisance, but will afford the circuit the highest amount of protection. I think that I can live with the occasional fuse blowing during those times I might feel like cranking the stereo up. Lenny |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
DVD player acting up | Home Repair | |||
Fluke 79 acting up | Electronics Repair | |||
Can I Replace All My Fuses WIth Time Delay Fuses? | Home Repair | |||
A/C Thermostas Keep acting up | Home Repair | |||
Help! Heating acting up | Home Repair |