Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems.

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
Posted to sci.electronics.repair
external usenet poster
 
Posts: 18
Default Can't Remove "Feature" Icons from Samsung LN32D403E2D Screen

This set works normally but has four icons displaying features of the set ("Series 4", "Wide Color", etc.) at the top left corner. They disappear when accessing the menu or input list, but reappear and stay there during normal viewing. Cannot figure out how to get them off, nor can I find any advice online. Has anyone else seen this?
  #2   Report Post  
Posted to sci.electronics.repair
external usenet poster
 
Posts: 18
Default Can't Remove "Feature" Icons from Samsung LN32D403E2D Screen

On Friday, May 16, 2014 11:14:24 PM UTC-3, wrote:
This set works normally but has four icons displaying features of the set ("Series 4", "Wide Color", etc.) at the top left corner. They disappear when accessing the menu or input list, but reappear and stay there during normal viewing. Cannot figure out how to get them off, nor can I find any advice online. Has anyone else seen this?


Did a bit more research and finally discovered how to turn these off, although it wasn't very straightforward (TV must be in tuner mode, then run "Plug and Play" procedure and turn off Store Demo mode when prompted). Seems dumb that the set would turn this on by default, but I don't know why the user would do it and I really doubt this set just came from a store display (although I imagine they can and do fail before they even leave the store).
Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Anyone heard of Emerson/White Rodgers "Cool Savings" feature on theirthermostats? Duesenberg Home Repair 12 June 24th 17 05:36 PM
Ariens Snowblower Question Regarding Their "Auto Turn" Feature ? Bob[_44_] Home Repair 7 February 23rd 16 11:38 AM
Is this overkill? (A "burn-in" warning and "uneven-aging" warningfor a Samsung 27" LED-backlit TV) jaynews Electronics Repair 21 September 3rd 13 07:57 PM
Problem with Samsung Blu-ray player - model BD-P1600: when switched on, stays on "LOAD", won't go to "NO DISC" Gary[_13_] Electronics Repair 3 January 10th 13 01:31 PM
Rotary table - how do they make a "quick-adjust feature"? jtaylor Metalworking 13 February 18th 06 10:42 AM


All times are GMT +1. The time now is 12:57 AM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 DIYbanter.
The comments are property of their posters.
 

About Us

"It's about DIY & home improvement"