Home |
Search |
Today's Posts |
|
Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
JVC AV25590 Remote-Delayed response
Have a JVC AV 25590 TV that, sometimes, has delayed response to certain remote
functions as the set "warms-up". When 1st turned on everything works fine, as the set remains on, the volume decrease (for example) doesn't respond immediately. If the button is kept depressed, it will work. After the set was on for 15 minutes, the button needed to be depressed about 5 seconds. This increased to 20 seconds after the set was on for 30 minutes. There are 3 buttons which this occurs on, others respond just fine all the time. Sometimes, all will start to respond normally even if the set remains on. Does anyone have any suggestions or experience with this? Thanks in advance. |
#2
|
|||
|
|||
JVC AV25590 Remote-Delayed response
"WbSearch" wrote in message ... Have a JVC AV 25590 TV that, sometimes, has delayed response to certain remote functions as the set "warms-up". When 1st turned on everything works fine, as the set remains on, the volume decrease (for example) doesn't respond immediately. If the button is kept depressed, it will work. After the set was on for 15 minutes, the button needed to be depressed about 5 seconds. This increased to 20 seconds after the set was on for 30 minutes. There are 3 buttons which this occurs on, others respond just fine all the time. Sometimes, all will start to respond normally even if the set remains on. Does anyone have any suggestions or experience with this? Thanks in advance. The first thing to try is fresh batteries in the remote. I've seen remotes that the function buttons had to be pressed 3 or 4 times before it would work, new batteries fixed them. |
#3
|
|||
|
|||
JVC AV25590 Remote-Delayed response
I did measure the voltage of the batteries while pressing one of the buttons,
and they were above 1.45 v, which seems adequate. Worth a try, butt. |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Tv remote | Electronics | |||
Shop Fox DC Remote: Switching only 1 phase? | Woodworking | |||
Television remote eye | Electronics | |||
Long Ranger II Remote | Woodworking | |||
Ideal Response 100 Combi problem | UK diy |