Home |
Search |
Today's Posts |
|
Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems. |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to sci.electronics.repair
|
|||
|
|||
Identification for onboard switch needed (Receiver Pioneer A-331)
Hello,
the source selection on the front panel of the Pioneer A-331 has 6 switches of which 4 are temporary switches (source) and 2 are permanent switches (tape monitor). They have stopped working properly and I was not able to fix the problem with contact spray this time. Now I want to replace them but cannot identify the brand and model. Take a look at http://img3.fotos-hochladen.net/uplo...woivr6zn0p.jpg The footprint on the bottom side is a 2x6 dil - 12 contact pins. Note that it is not possible to use a random model switch with the same footprint as there is a release mechanism which then would not work anymore. Thats why the blue knobs have the shape they have. Regards Jens |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Pioneer Plasma Receiver PDP-R05G trap switch | Electronics Repair | |||
PIONEER VSX-808 RDS Receiver | Electronics Repair | |||
pioneer plasma receiver pdp-r05g trap switch | Electronics Repair | |||
Require unlock code for Pioneer Plasma Receiver PDP-R05G trap switch ? (reposted) | Electronics Repair | |||
Need help, please. Pioneer receiver VS. Lightning... | Electronics Repair |