Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems.

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #81   Report Post  
Posted to sci.electronics.basics,sci.electronics.repair,alt.comp.hardware.pc-homebuilt,alt.home.repair
external usenet poster
 
Posts: 1,507
Default Name of plug in US

Geoffrey S. Mendelson wrote:

While I personally think the world would be a better place if everyone
standardized on 1.2 volt AA batteries (preferably NiMH at the moment) it's
a loosing battle.


I'll never ever waste my money on NiMH batteries again. They're the
crappiest excuse for batteries I've ever encountered. After about six
months of use, and charge/use cycles, their useful life (per charge)
deteriorates to a matter of seconds.

Anyone who spends money on NiMHs, even with a "smart" charger, is an
idiot.

And you misspelled "losing."

Hope This Helps!
Rich

  #82   Report Post  
Posted to sci.electronics.basics,sci.electronics.repair,alt.comp.hardware.pc-homebuilt,alt.home.repair
external usenet poster
 
Posts: 1,507
Default Name of plug in US

Geoffrey S. Mendelson wrote:

Why can't Motorola be it's proper name? It was "invented" by Motorola.
It's a longer version of the the RCA connector, "invented" by RCA.


THERE IS NO APOSTROPHE IN THE POSSESSIVE ITS!!!!!!!!!!!!!!!!!

Please clue up.

Rich Grise, Self-Appointed Chief,
Internet Apostrophe Police

  #83   Report Post  
Posted to sci.electronics.basics,sci.electronics.repair,alt.comp.hardware.pc-homebuilt,alt.home.repair
external usenet poster
 
Posts: 1,507
Default Name of plug in US

Jasen Betts wrote:

The car radio antenna plug is often called "Motorola"
no doubt it has a technical name too, but Wikipedia
doesn't seem to know it.

http://en.wikipedia.org/wiki/Motorola_connector

These guys seem to know:
http://shop.vetcosurplus.com/catalog...oducts_id=8818
close-up:
http://shop.vetcosurplus.com/catalog...e.php?pID=8818

Hope This Helps!
Rich

  #84   Report Post  
Posted to sci.electronics.basics,sci.electronics.repair,alt.comp.hardware.pc-homebuilt,alt.home.repair
external usenet poster
 
Posts: 12,924
Default Name of plug in US


Jeff Liebermann wrote:

On Sat, 30 Apr 2011 22:53:28 -0400, "Michael A. Terrell"
wrote:

The push on connectors were the 'G' series, and designed to be
matable with the 'F' series.


Not exactly. The "G" series was contrived to provide a connector
suitable for passing up to 15A of current. The cable companies have
always powered line amps from DC on the cable. That was fine with
semi-rigid coax and compression connectors that could handle the
current. However, when the amps shrank in size, a newer smaller
connector was needed. That was the Type G connector.
http://www.amphenolrf.com/products/typeg.asp?N=0&sid=4DBB51003571617F&



The 'G' connector was mostly used on modules in CATV line amps and
MATV headend modules to plug in band splitters, single channel strip
amplifiers or other items. They had to make a very good connection, and
there was no room to use something like a BNC connector. Not only did
the connectors have to pass power to amplifier modules, they provided
all the mechanical mounting for the modules. The final requirement was
no RF leakage, even though there were no threads.


Most places selling them are absolutely clueless, like selling DE9
Mass marketing to, for and by idiots.


Well, lets see what Google can offer. Searching for DE9, I get
70,100,000 hits, while DB9 returns 8,830,000 hits. So about 12% are
clueless.



Do a search for "Small Computer Serial Interface" for another laugh.
It gives over 70K hits but a few years ago it was over a half million,
including the website of a college in their computer course. I emailed
them to point out the bad information and was told that "That is an old
page, and we don't update those."


Actually, it should be DE9S or DE9P, but that's being picky.



It describes the shell size and number of possible contacts. The S or
P tells which half. It would be rare to find someone who only carries
one half, wouldn't it?


If you want real fun, try to buy a 'HN' connector over the counter at
a wholesaler. ;-)


http://www.amphenolrf.com/products/hn.asp?N=0&sid=4DBB510041D4E17F&
Hi-V. I've never seen or used one. There are plenty of other obscure
connectors.



RCA used them in their TV transmitters. I had a couple new, Amphenol
still in the bags I picked up surplus when I worked in Broadcasting.


The RF industry is full of specialized connectors. There was one
connector found on many wireless cards where I couldn't find a mating
plug. It turned out that there wasn't a mating plug. It was a test
connector with a conical entry.
http://802.11junk.com/jeffl/crud/WG511.jpg

--
Jeff Liebermann
150 Felker St #D
http://www.LearnByDestroying.com
Santa Cruz CA 95060 http://802.11junk.com
Skype: JeffLiebermann AE6KS 831-336-2558



--
You can't fix stupid. You can't even put a Band-Aid on it, because it's
Teflon coated.
  #85   Report Post  
Posted to sci.electronics.basics,sci.electronics.repair,alt.comp.hardware.pc-homebuilt,alt.home.repair
external usenet poster
 
Posts: 679
Default Name of plug in US

On May 1, 5:03*pm, "Michael A. Terrell"
wrote:
Jeff Liebermann wrote:

On Sat, 30 Apr 2011 22:53:28 -0400, "Michael A. Terrell"
wrote:


* The push on connectors were the 'G' series, and designed to be
matable with the 'F' series.


Not exactly. *The "G" series was contrived to provide a connector
suitable for passing up to 15A of current. *The cable companies have
always powered line amps from DC on the cable. *That was fine with
semi-rigid coax and compression connectors that could handle the
current. *However, when the amps shrank in size, a newer smaller
connector was needed. *That was the Type G connector.
http://www.amphenolrf.com/products/typeg.asp?N=0&sid=4DBB51003571617F&


* *The 'G' connector was mostly used on modules in CATV line amps and
MATV headend modules to plug in band splitters, single channel strip
amplifiers or other items. *They had to make a very good connection, and
there was no room to use something like a BNC connector. *Not only did
the connectors have to pass power to amplifier modules, they provided
all the mechanical mounting for the modules. *The final requirement was
no RF leakage, even though there were no threads.

Most places selling them are absolutely clueless, like selling DE9
*Mass marketing to, for and by idiots.


Well, lets see what Google can offer. *Searching for DE9, I get
70,100,000 hits, while DB9 returns 8,830,000 hits. *So about 12% are
clueless.


* *Do a search for "Small Computer Serial Interface" for another laugh.
It gives over 70K hits but a few years ago it was over a half million,
including the website of a college in their computer course. *I emailed
them to point out the bad information and was told that "That is an old
page, and we don't update those."

Actually, it should be DE9S or DE9P, but that's being picky.


* *It describes the shell size and number of possible contacts. The S or
P tells which half. It would be rare to find someone who only carries
one half, wouldn't it?

* If you want real fun, try to buy a 'HN' connector over the counter at
a wholesaler. ;-)


http://www.amphenolrf.com/products/hn.asp?N=0&sid=4DBB510041D4E17F&
Hi-V. *I've never seen or used one. *There are plenty of other obscure
connectors.


* *RCA used them in their TV transmitters. *I had a couple new, Amphenol
still in the bags I picked up surplus when I worked in Broadcasting.

The RF industry is full of specialized connectors. *There was one
connector found on many wireless cards where I couldn't find a mating
plug. *It turned out that there wasn't a mating plug. *It was a test
connector with a conical entry.
http://802.11junk.com/jeffl/crud/WG511.jpg


--
Jeff Liebermann * *
150 Felker St #D * *http://www.LearnByDestroying.com
Santa Cruz CA 95060http://802.11junk.com
Skype: JeffLiebermann * * AE6KS * *831-336-2558


--
You can't fix stupid. You can't even put a Band-Aid on it, because it's
Teflon coated.


WE DONT CARE FOR YOUR INPUT.
CONTROL YOUR MADKED ID TROLLING, YOU TWO FACED FREAK.
GO ATTEND YOUR ANTI-GOVERNMENT WEBPAGE AND LEAVE US ALONE.

NOTE THAT YOUR NAME HAS BEEN MENTIONED IN A POLICE REPORT.
IT WOULD SERVE YOUR BEST INTEREST TO APPLY YOUR COMPUTER KNOWLEDGE TO
ENDING THE HARASSMENT CAMPAIGN YOU STARTED AGAINST MR. QUIJANO OR BE
ENJOINED IN A CRIMINAL LAWSUIT WITH THE KNOWN SUSPECTED CYBER-STALKING
INDIVIDUALS ACCOUNTS.

TGITM


  #86   Report Post  
Posted to sci.electronics.basics,sci.electronics.repair,alt.comp.hardware.pc-homebuilt,alt.home.repair
external usenet poster
 
Posts: 12,924
Default Name of plug in US


"Geoffrey S. Mendelson" wrote:

Jasen Betts wrote:
The car radio antenna plug if often called "Motorola"
no doubt it has a technical name too, but Wikipedia
doesn't seem to know it.


Why can't Motorola be it's proper name? It was "invented" by Motorola.



No, It was developed by Galvin manufacturing, who called their first
car radio the 'Motorola'. Then they changed the company's name to
Motorola.


It's a longer version of the the RCA connector, "invented" by RCA.



How so? The Motorola plug has an exposed center conductor, and
spring contacts on the body to hold it in the jack.

The RCA jack was developed for radios to add a Phono input to sell
turntables instead of the existing acoustic phonos. The connector has a
shorter center pin, and the outer contact was split ever 90 degrees to
allow it to be forced over the jack. Most early phono connectors I saw
wouldn't fit inside a Motorola jack, and the center contact was too
short to reach the center of a Motorola jack. Also, the braid of the
shielded cable was soldered to the shell of the Phono connector, but the
Motorola plugs were crimped to the shield of the RG-62, 93 ohm coax.
Some OEMs didn't even solder the center pin. Instead, they shoved a
piece of rubber into it, to hold the wire to the side.


http://www.motorola.com/Consumers/US-EN/About_Motorola/History/Timeline


Probably at one time RCA had a patent on its connector and Motorola
had a patent on theirs.



Of course they did. At one time a 'Factory radio' for a Ford vehicle
could be a Bendix, a Motorola, or a Philco. General Motors radios were
built by Delco, who built home radios at one time. The smaller car
companies bought customized radios from various manufacturers with the
required nosepiece, shaft spacings and lengths to fit that car.


It wasn't until the second world war that the concept of standarization
across manufacturers was pushed. Companies made their own parts, connectors,
etc, and tried to prevent competion.



Not true. A lot of early US radios used the same connectors for
batteries. Tube families all used the same sockets. Binding Posts,
Phone Tip Jacks, and Banana Jacks were very common to connect headphone
or speakers. The common terminal strips were used as well.

Most of the military connectors developed for W.W.II were obsolete
soon after the war ended, and the next generation of Military
electronics was developed. They are the hardest thing to find when you
collect surplus military electronics.

--
You can't fix stupid. You can't even put a Band-Aid on it, because it's
Teflon coated.
  #87   Report Post  
Posted to sci.electronics.basics,sci.electronics.repair,alt.comp.hardware.pc-homebuilt,alt.home.repair
external usenet poster
 
Posts: 12,924
Default Name of plug in US


zek wrote:

On Apr 30, 7:39 am, Man-wai Chang wrote:
http://www.amazon.co.uk/Cable-Tex-Co...White/dp/B003S...

What's the name of the plugs in USA?

It seems that USA televisions only use F Type connectors.

--
@~@ Might, Courage, Vision, SINCERITY.
/ v \ Simplicity is Beauty! May the Force and farces be with you!
/( _ )\ (x86_64 Ubuntu 9.10) Linux 2.6.38.4
^ ^ 19:36:01 up 5 days 23:37 1 user load average:1.09 1.05 1.05
不借貸! 不詐騙! 不援交! 不打交! 不打劫! 不自殺! 請考慮綜援 (CSSA):http://www.swd.gov.hk/tc/index/site_...sub_addressesa


The name of the plug is, how an RCA phonograph plug should have been
made.



YAWn.............................................

--
You can't fix stupid. You can't even put a Band-Aid on it, because it's
Teflon coated.
  #88   Report Post  
Posted to sci.electronics.basics,sci.electronics.repair,alt.comp.hardware.pc-homebuilt,alt.home.repair
external usenet poster
 
Posts: 679
Default Name of plug in US

On May 1, 5:28*pm, "Michael A. Terrell"
wrote:
zek wrote:

On Apr 30, 7:39Â am, Man-wai Chang wrote:
http://www.amazon.co.uk/Cable-Tex-Co...White/dp/B003S....


What's the name of the plugs in USA?


It seems that USA televisions only use F Type connectors.


--
 * @~@  *Might, Courage, Vision, SINCERITY.
 */ v \  Simplicity is Beauty! May the Force and farces be with you!
/( _ )\ (x86_64 Ubuntu 9.10) Â Linux 2.6.38.4
 * ^ ^  *19:36:01 up 5 days 23:37 1 user load average:1.09 1.05 1.05
ä¸ åŸè²¸! ä¸ è© é¨! ä¸ æ ´äº¤! ä¸ æ交! ä¸ æå*«! ä¸ èªæ®º! è«èƒæ®ç¶œæ ´ (CSSA):http://www.swd.gov..hk/tc/index/site...sub_addressesa


The name of the plug is, how an RCA phonograph plug should have been
made.


* *YAWn............................................ .

--
You can't fix stupid. You can't even put a Band-Aid on it, because it's
Teflon coated.


GROW UP AND GET OUT OF HERE....GO YAWN UP SOME OTHER GROUP,
"ENGINEER".

YOUR ENTIRE PATHETIC LIFE MUST BE A YAWN..IF YOU DID ANYTHING GOOD
WITH IT YOUR MISERABLE OLD LIFE WOULDN'T BE SO BORING....TAKE MY
ADVICE AND KILL THE KRWACKHEAD FOOL.

PATECUM
TGITM
  #89   Report Post  
Posted to sci.electronics.basics,sci.electronics.repair,alt.comp.hardware.pc-homebuilt,alt.home.repair
external usenet poster
 
Posts: 314
Default Name of plug in US

On May 1, 2:25*pm, "Michael A. Terrell"
wrote:


* *The RCA jack was developed for radios to add a Phono input to sell
turntables instead of the existing acoustic phonos. *


A friend's mother has an RCA radio with a Television jack. Apparently
it was "television ready" in that you could plug your speakerless,
audio-amplifier-free RCA television into it.

The problem with both the RCA plug and the Motorola plug, compared to
other coaxial plugs, is that the hot lead makes contact before the
ground does.
  #90   Report Post  
Posted to sci.electronics.basics,sci.electronics.repair,alt.comp.hardware.pc-homebuilt,alt.home.repair
external usenet poster
 
Posts: 2,022
Default Name of plug in US

On Sun, 01 May 2011 10:35:12 -0500, "
wrote:

On Sun, 1 May 2011 08:00:41 -0700 (PDT), spamtrap1888
wrote:

On May 1, 4:29*am, "Geoffrey S. Mendelson" wrote:
Jasen Betts wrote:
The car radio antenna plug if often called "Motorola"
no doubt it has a technical name too, but Wikipedia
doesn't seem to know it.

Why can't Motorola be it's proper name? It was "invented" by Motorola.
It's a longer version of the the RCA connector, "invented" by RCA.


Or the "GR" plug on General Radio equipment. People my age fairly
universally called it the "double banana" plug.


The "GR" connector is *not* a "double banana". The GR connector is a
hermaphroditic connector about an inch in diameter.


---
The "GR" connector spamtrap 1888 was talking about is, in fact, a
double banana plug/jack with the contacts on 0.75" centers.

The connector you're talking about, the GR874 series, is a
hermaphroditic connector intended for RF use.

http://www.ietlabs.com/pdf/Datasheets/874_9.pdf


--
JF


  #91   Report Post  
Posted to sci.electronics.basics,sci.electronics.repair,alt.comp.hardware.pc-homebuilt,alt.home.repair
external usenet poster
 
Posts: 2,022
Default Name of plug in US

On Sun, 1 May 2011 12:35:53 -0700 (PDT), zek
wrote:

The name of the plug is, how an RCA phonograph plug should have been
made.

Greg


---
Why?


--
JF
  #92   Report Post  
Posted to sci.electronics.basics,sci.electronics.repair,alt.comp.hardware.pc-homebuilt,alt.home.repair
external usenet poster
 
Posts: 2,022
Default Name of plug in US

On Sun, 1 May 2011 14:18:38 -0700 (PDT), The Ghost in The Machine
wrote:


WE DONT CARE FOR YOUR INPUT.


---
"We"???

What group of loons has enjoined you as their spokesman?
---

CONTROL YOUR MADKED ID TROLLING, YOU TWO FACED FREAK.
GO ATTEND YOUR ANTI-GOVERNMENT WEBPAGE AND LEAVE US ALONE.


---
"Us"???

What group of loons has enjoined you as their spokesman?
---

NOTE THAT YOUR NAME HAS BEEN MENTIONED IN A POLICE REPORT.


---
As the _issuer_ of a complaint, more than likely and, judging from
your reply, the complaint was issued against _you_.
---

IT WOULD SERVE YOUR BEST INTEREST TO APPLY YOUR COMPUTER KNOWLEDGE TO
ENDING THE HARASSMENT CAMPAIGN YOU STARTED AGAINST MR. QUIJANO OR BE
ENJOINED IN A CRIMINAL LAWSUIT WITH THE KNOWN SUSPECTED CYBER-STALKING
INDIVIDUALS ACCOUNTS.

TGITM


---
Hollow threats, ergo you shout.

If you had a case, in the real world, you would have already taken it
to court and would have been willing to have it adjudicated by
disinterested parties.

Since you have not and, instead, prefer to have it tried here, you've
already lost because of your demeanor.

--
JF
  #93   Report Post  
Posted to sci.electronics.basics,sci.electronics.repair,alt.comp.hardware.pc-homebuilt,alt.home.repair
external usenet poster
 
Posts: 1,417
Default Name of plug in US

On Apr 30, 7:39*am, Man-wai Chang wrote:
http://www.amazon.co.uk/Cable-Tex-Co...White/dp/B003S...

What's the name of the plugs in USA?

It seems that USA televisions only use F Type connectors.

--
* *@~@ * Might, Courage, Vision, SINCERITY.
* / v \ *Simplicity is Beauty! May the Force and farces be with you!
/( _ )\ (x86_64 Ubuntu 9.10) *Linux 2.6.38.4
* *^ ^ * 19:36:01 up 5 days 23:37 1 user load average: 1.09 1.05 1.05
不借貸! 不詐騙! 不援交! 不打交! 不打劫! 不自殺! 請考慮綜援 (CSSA):http://www.swd.gov.hk/tc/index/site_...sub_addressesa


Dont know what they are called but Radio Shack has the adapters, just
bought one. Also for what it is worth the male plugs for those cables
will fit a stard F type socket. I thought they were just quick connect
F connectors and had bee using them as such until I bought a stereo
for my daughter that HAD to have one.

Jimmie
  #94   Report Post  
Posted to sci.electronics.basics,sci.electronics.repair,alt.comp.hardware.pc-homebuilt,alt.home.repair
external usenet poster
 
Posts: 8,589
Default Name of plug in US

On Sun, 01 May 2011 17:50:07 -0500, John Fields
wrote:

On Sun, 1 May 2011 14:18:38 -0700 (PDT), The Ghost in The Machine
wrote:


WE DONT CARE FOR YOUR INPUT.


---
"We"???

What group of loons has enjoined you as their spokesman?


His multiple personalities (dumb computer, more stupid ghost, Roy Queerjano,
and others).

---

CONTROL YOUR MADKED ID TROLLING, YOU TWO FACED FREAK.
GO ATTEND YOUR ANTI-GOVERNMENT WEBPAGE AND LEAVE US ALONE.


---
"Us"???

What group of loons has enjoined you as their spokesman?
---

NOTE THAT YOUR NAME HAS BEEN MENTIONED IN A POLICE REPORT.


---
As the _issuer_ of a complaint, more than likely and, judging from
your reply, the complaint was issued against _you_.
---

IT WOULD SERVE YOUR BEST INTEREST TO APPLY YOUR COMPUTER KNOWLEDGE TO
ENDING THE HARASSMENT CAMPAIGN YOU STARTED AGAINST MR. QUIJANO OR BE
ENJOINED IN A CRIMINAL LAWSUIT WITH THE KNOWN SUSPECTED CYBER-STALKING
INDIVIDUALS ACCOUNTS.

TGITM


---
Hollow threats, ergo you shout.

If you had a case, in the real world, you would have already taken it
to court and would have been willing to have it adjudicated by
disinterested parties.

Since you have not and, instead, prefer to have it tried here, you've
already lost because of your demeanor.


He's just an unemployed sparky from Brookyln, living in mommy's basement.
  #95   Report Post  
Posted to sci.electronics.basics,sci.electronics.repair,alt.comp.hardware.pc-homebuilt,alt.home.repair
external usenet poster
 
Posts: 679
Default Name of plug in US

On May 1, 9:12*pm, "
wrote:
On Sun, 01 May 2011 17:50:07 -0500, John Fields

wrote:
On Sun, 1 May 2011 14:18:38 -0700 (PDT), The Ghost in The Machine
wrote:


WE DONT CARE FOR YOUR INPUT.


---
"We"???


What group of loons has enjoined you as their spokesman?


His multiple personalities (dumb computer, more stupid ghost, Roy Queerjano,
and others).





---


CONTROL YOUR MADKED ID TROLLING, YOU TWO FACED FREAK.
GO ATTEND YOUR ANTI-GOVERNMENT WEBPAGE AND LEAVE US ALONE.


---
"Us"???


What group of loons has enjoined you as their spokesman?
---


NOTE THAT YOUR NAME HAS BEEN MENTIONED IN A POLICE REPORT.


---
As the _issuer_ of a complaint, more than likely and, judging from
your reply, the complaint was issued against _you_.
---


IT WOULD SERVE YOUR BEST INTEREST TO APPLY YOUR COMPUTER KNOWLEDGE TO
ENDING THE HARASSMENT CAMPAIGN YOU STARTED AGAINST MR. QUIJANO OR BE
ENJOINED IN A CRIMINAL LAWSUIT WITH THE KNOWN SUSPECTED CYBER-STALKING
INDIVIDUALS ACCOUNTS.


TGITM


---
Hollow threats, ergo you shout.


If you had a case, in the real world, you would have already taken it
to court and would have been willing to have it adjudicated by
disinterested parties.


Since you have not and, instead, prefer to have it tried here, you've
already lost because of your demeanor.


He's just an unemployed sparky from Brookyln, living in mommy's basement.


EAT FECES, I READ IT CLEARS THE ILL EFFECT OF CRACK COCAINE IN YOU
BRAIN.
YOU FOOL...I AM NOT ROY QUINTANO YOU QUEER ASS FOOL....
BUT HE IS AN ESTEEM US CITIZEN...WE'RE GOING TO HUNT YOU DOWN AND
BRING YOY TO JUSTICE, LIKE DONT TO BIN LADEN....
YOU FAGGOTY **** FREAK...LEAVE ROY OUT OF THIS YOU TERRORIST
******* !!!
YOUR FATE IS WRITTEN IN THE SAND OF THE DESSERT AND THE CONCRETE OF
THE CITY.

PATECUM
TGITM


  #96   Report Post  
Posted to sci.electronics.basics,sci.electronics.repair,alt.comp.hardware.pc-homebuilt,alt.home.repair
external usenet poster
 
Posts: 679
Default Name of plug in US

On May 1, 7:29*pm, JIMMIE wrote:
On Apr 30, 7:39*am, Man-wai Chang wrote:

http://www.amazon.co.uk/Cable-Tex-Co...White/dp/B003S...


What's the name of the plugs in USA?


It seems that USA televisions only use F Type connectors.


--
* *@~@ * Might, Courage, Vision, SINCERITY.
* / v \ *Simplicity is Beauty! May the Force and farces be with you!
/( _ )\ (x86_64 Ubuntu 9.10) *Linux 2.6.38.4
* *^ ^ * 19:36:01 up 5 days 23:37 1 user load average:1.09 1.05 1.05
不借貸! 不詐騙! 不援交! 不打交! 不打劫! 不自殺! 請考慮綜援 (CSSA):http://www.swd.gov.hk/tc/index/site_...sub_addressesa


Dont know what they are called but Radio Shack has the adapters, just
bought one. Also for what it is worth the male plugs for those cables
will fit a stard F type socket. I thought they were just quick connect
F connectors and had bee using them as such until I bought a stereo
for my daughter that HAD to have one.

Jimmie


THEY ARE CALLED ****IT CONNECTORS.......
AS IN "****IT" IT IS NOT IMPORATANT.

TGITM
  #97   Report Post  
Posted to sci.electronics.basics,sci.electronics.repair,alt.comp.hardware.pc-homebuilt,alt.home.repair
external usenet poster
 
Posts: 679
Default Name of plug in US

On May 1, 6:50*pm, John Fields wrote:
On Sun, 1 May 2011 14:18:38 -0700 (PDT), The Ghost in The Machine

wrote:
WE DONT CARE FOR YOUR INPUT.


---
"We"???

What group of loons has enjoined you as their spokesman?
---

CONTROL YOUR MADKED ID TROLLING, YOU TWO FACED FREAK.
GO ATTEND YOUR ANTI-GOVERNMENT WEBPAGE AND LEAVE US ALONE.


---
"Us"???

What group of loons has enjoined you as their spokesman?
---

NOTE THAT YOUR NAME HAS BEEN MENTIONED IN A POLICE REPORT.


---
As the _issuer_ of a complaint, more than likely and, judging from
your reply, the complaint was issued against _you_.
---

IT WOULD SERVE YOUR BEST INTEREST TO APPLY YOUR COMPUTER KNOWLEDGE TO
ENDING THE HARASSMENT CAMPAIGN YOU STARTED AGAINST MR. QUIJANO OR BE
ENJOINED IN A CRIMINAL LAWSUIT WITH THE KNOWN SUSPECTED CYBER-STALKING
INDIVIDUALS ACCOUNTS.


TGITM


---
Hollow threats, ergo you shout.

If you had a case, in the real world, you would have already taken it
to court and would have been willing to have it adjudicated by
disinterested parties.

Since you have not and, instead, prefer to have it tried here, you've
already lost because of your demeanor.

--
JF

WHO ARE YOU, TERRORS LIVE-IN LOVER?
GET A GRIP FIELDS HE IS IN HIDING....THEY NEED TO ID AND APPREHEND HIS
CYBERSTALKING FOOLISH ASS BEFORE THEY CAN PROSECUTE HIM...HOPEFULLY
IT'LL GO WRONG AND WE'LL SEE HIS DEAD BODY ON DISPLAY SOMEWHERE....

PATECUM
TGITM
  #98   Report Post  
Posted to sci.electronics.basics,sci.electronics.repair,alt.comp.hardware.pc-homebuilt,alt.home.repair
external usenet poster
 
Posts: 12,924
Default Name of plug in US


John Fields wrote:

On Sun, 1 May 2011 14:18:38 -0700 (PDT), The Ghost in The Machine
wrote:

WE DONT CARE FOR YOUR INPUT.


---
"We"???

What group of loons has enjoined you as their spokesman?



Roy and all his dirty, crack smoking sock puppets:

Roy J Quijano
415 E 151st St
Bronx, NY 10455
(718) 292-1943

He's the reason for my current sigfile.


--
You can't fix stupid. You can't even put a Band-Aid on it, because it's
Teflon coated.
  #99   Report Post  
Posted to sci.electronics.basics,sci.electronics.repair,alt.comp.hardware.pc-homebuilt,alt.home.repair
external usenet poster
 
Posts: 12,924
Default Name of plug in US


" wrote:

On Sun, 01 May 2011 17:50:07 -0500, John Fields
wrote:

On Sun, 1 May 2011 14:18:38 -0700 (PDT), The Ghost in The Machine
wrote:


WE DONT CARE FOR YOUR INPUT.


---
"We"???

What group of loons has enjoined you as their spokesman?


His multiple personalities (dumb computer, more stupid ghost, Roy Queerjano,
and others).

---

CONTROL YOUR MADKED ID TROLLING, YOU TWO FACED FREAK.
GO ATTEND YOUR ANTI-GOVERNMENT WEBPAGE AND LEAVE US ALONE.


---
"Us"???

What group of loons has enjoined you as their spokesman?
---

NOTE THAT YOUR NAME HAS BEEN MENTIONED IN A POLICE REPORT.


---
As the _issuer_ of a complaint, more than likely and, judging from
your reply, the complaint was issued against _you_.
---

IT WOULD SERVE YOUR BEST INTEREST TO APPLY YOUR COMPUTER KNOWLEDGE TO
ENDING THE HARASSMENT CAMPAIGN YOU STARTED AGAINST MR. QUIJANO OR BE
ENJOINED IN A CRIMINAL LAWSUIT WITH THE KNOWN SUSPECTED CYBER-STALKING
INDIVIDUALS ACCOUNTS.

TGITM


---
Hollow threats, ergo you shout.

If you had a case, in the real world, you would have already taken it
to court and would have been willing to have it adjudicated by
disinterested parties.

Since you have not and, instead, prefer to have it tried here, you've
already lost because of your demeanor.


He's just an unemployed sparky from Brookyln, living in mommy's basement.



Hopefully, it'll be bulldozed with the other falling down dumps in
the area.


--
You can't fix stupid. You can't even put a Band-Aid on it, because it's
Teflon coated.
  #100   Report Post  
Posted to sci.electronics.basics,sci.electronics.repair,alt.comp.hardware.pc-homebuilt,alt.home.repair
external usenet poster
 
Posts: 12,924
Default Name of plug in US


spamtrap1888 wrote:

On May 1, 2:25 pm, "Michael A. Terrell"
wrote:


The RCA jack was developed for radios to add a Phono input to sell
turntables instead of the existing acoustic phonos.


A friend's mother has an RCA radio with a Television jack. Apparently
it was "television ready" in that you could plug your speakerless,
audio-amplifier-free RCA television into it.

The problem with both the RCA plug and the Motorola plug, compared to
other coaxial plugs, is that the hot lead makes contact before the
ground does.



That's because they were never intended to be plugged in to equipment
under power, due to leakage currents in the AC powered equipment. There
is a Switchcraft version of the Phono/RCA that has a built in switch to
be used hot. It can be wired to short out the connector, until the plug
is inserted.

Explain want difference it would make on a car radio? that is the
only application it was designed for.


--
You can't fix stupid. You can't even put a Band-Aid on it, because it's
Teflon coated.


  #101   Report Post  
Posted to sci.electronics.basics,sci.electronics.repair,alt.comp.hardware.pc-homebuilt,alt.home.repair
external usenet poster
 
Posts: 314
Default Name of plug in US

On May 1, 10:29*pm, "Michael A. Terrell"
wrote:
spamtrap1888 wrote:


The problem with both the RCA plug and the Motorola plug, compared to
other coaxial plugs, is that the hot lead makes contact before the
ground does.


* *That's because they were never intended to be plugged in to equipment
under power, due to leakage currents in the AC powered equipment. *There
is a Switchcraft version of the Phono/RCA that has a built in switch to
be used hot. It can be wired to short out the connector, until the plug
is inserted.

* *Explain want difference it would make on a car radio? *that is the
only application it was designed for.


A pin connected to a long metal rod, inserted into an amplifier input
-- what could possibly go wrong?
  #102   Report Post  
Posted to sci.electronics.basics,sci.electronics.repair,alt.comp.hardware.pc-homebuilt,alt.home.repair
external usenet poster
 
Posts: 13
Default Name of plug in US

On May 2, 1:24*am, "Michael A. Terrell"
wrote:
John Fields wrote:

On Sun, 1 May 2011 14:18:38 -0700 (PDT), The Ghost in The Machine
wrote:


WE DONT CARE FOR YOUR INPUT.


---
"We"???


What group of loons has enjoined you as their spokesman?


* *Roy and all his dirty, crack smoking sock puppets:

Roy J Quijano
415 E 151st St
Bronx, NY 10455(718) 292-1943

* *He's the reason for my current sigfile.

--
You can't fix stupid. You can't even put a Band-Aid on it, because it's
Teflon coated.


You dirty low down Lying Libelous creep I've never done crack and I my
friends are not crackheads.
You're the one responsible for all the flaming going on...and the
author of several criminally abusive trolls.

Pray the charges I filed go though, in the long run you will be better
off than if Divine Justice gets you.

You Pathetic Cyberstalking Coward!
Go ahead bring your foolish fat face and confront me at my place.
We'll see who's wrong...you filthy flaming sack of nothingness.

Mr. Roy Quijano
Electrical Electronic Technician
Disabled
Bronx, NY USA 10455
"The trouble with some "educated" people is they forget they are but
children in Gods sight.
  #103   Report Post  
Posted to sci.electronics.basics,sci.electronics.repair,alt.comp.hardware.pc-homebuilt,alt.home.repair
external usenet poster
 
Posts: 2
Default Name of plug in US

Am 2.5.2011 schrub Jamie:

Man-wai Chang wrote:
http://rfshop.com.au/Store/tabid/63/...8/Default.aspx

2 minutes on google



PAL??? Belling Lee?

IEC 169-2


I found "IEC 60169-2" on
http://www.itwissen.info/definition/...connector.html
(The text is German, though).

Another search for "IEC 60169-2" led he
http://en.wikipedia.org/wiki/IEC_169-2#Belling-Lee

So, "Belling-Lee", as others pointed out, would be correct.

Josef
--
These are my personal views and not those of Fujitsu Technology Solutions!
Josef Mllers (Pinguinpfleger bei FTS)
If failure had no penalty success would not be a prize (T. Pratchett)
Company Details: http://de.ts.fujitsu.com/imprint.html
  #104   Report Post  
Posted to sci.electronics.basics,sci.electronics.repair,alt.comp.hardware.pc-homebuilt,alt.home.repair
external usenet poster
 
Posts: 12,924
Default Name of plug in US


spamtrap1888 wrote:

On May 1, 10:29 pm, "Michael A. Terrell"
wrote:
spamtrap1888 wrote:


The problem with both the RCA plug and the Motorola plug, compared to
other coaxial plugs, is that the hot lead makes contact before the
ground does.


That's because they were never intended to be plugged in to equipment
under power, due to leakage currents in the AC powered equipment. There
is a Switchcraft version of the Phono/RCA that has a built in switch to
be used hot. It can be wired to short out the connector, until the plug
is inserted.

Explain want difference it would make on a car radio? that is the
only application it was designed for.


A pin connected to a long metal rod, inserted into an amplifier input
-- what could possibly go wrong?



Nothing that you would understand. Leave electronics to those who
know what they are doing, but practice your pathetic trolling somewhere
else.


--
You can't fix stupid. You can't even put a Band-Aid on it, because it's
Teflon coated.
  #105   Report Post  
Posted to sci.electronics.basics,sci.electronics.repair,alt.comp.hardware.pc-homebuilt,alt.home.repair
external usenet poster
 
Posts: 1,507
Default Name of plug in US

Michael A. Terrell wrote:
spamtrap1888 wrote:
On May 1, 10:29 pm, "Michael A. Terrell"
spamtrap1888 wrote:


The problem with both the RCA plug and the Motorola plug, compared to
other coaxial plugs, is that the hot lead makes contact before the
ground does.

That's because they were never intended to be plugged in to
equipment
under power, due to leakage currents in the AC powered equipment.
There is a Switchcraft version of the Phono/RCA that has a built in
switch to be used hot. It can be wired to short out the connector,
until the plug is inserted.

Explain want difference it would make on a car radio? that is the
only application it was designed for.


A pin connected to a long metal rod, inserted into an amplifier input
-- what could possibly go wrong?


Nothing that you would understand. Leave electronics to those who
know what they are doing, but practice your pathetic trolling somewhere
else.

Michael, do you even read the names of the newsgroups you're posting in?
This is s.e.basics - even _YOU_ were a newbie before you knew everything
there is to know.

And it's rude to insult those who are trying to learn, you arrogant asshole.

By the way, how's that diabetic neuropathy stuff workin' out for ya?

Thanks,
Rich



  #106   Report Post  
Posted to sci.electronics.basics,sci.electronics.repair,alt.comp.hardware.pc-homebuilt,alt.home.repair
external usenet poster
 
Posts: 679
Default Name of plug in US

On May 2, 12:45*pm, "Michael A. Terrell"
wrote:
spamtrap1888 wrote:

On May 1, 10:29 pm, "Michael A. Terrell"
wrote:
spamtrap1888 wrote:


The problem with both the RCA plug and the Motorola plug, compared to
other coaxial plugs, is that the hot lead makes contact before the
ground does.


* *That's because they were never intended to be plugged in to equipment
under power, due to leakage currents in the AC powered equipment. *There
is a Switchcraft version of the Phono/RCA that has a built in switch to
be used hot. It can be wired to short out the connector, until the plug
is inserted.


* *Explain want difference it would make on a car radio? *that is the
only application it was designed for.


A pin connected to a long metal rod, inserted into an amplifier input
-- what could possibly go wrong?


* *Nothing that you would understand. *Leave electronics to those who
know what they are doing, but practice your pathetic trolling somewhere
else.

--
You can't fix stupid. You can't even put a Band-Aid on it, because it's
Teflon coated.


YOU'RE A FUNNY MAN.......DOES THAT MEAN YOU'VE CAGED YOUR OWN TROLL ?
BEWAREY, MR. QUICKJACKO CAN SNAP AND GO OFF YOUR TWO PLAY SELF IN A
FIT OF RAGE, I HOPE YOU DO FOLLOW YOUR OWN ADVICE....AND NEVER TROLL
OR ENDANGER HIM AGAIN.

I HATE TO SEE YOU GO THE WAY OF OSALAMI BIN THER LADEN.
ORDERING DEATH & CRAP AROUND........REST ASURED THAT "FOR THE TIME
BEING" WE ALL HATE YOUR BELLIGERENT ANTI-ESTABLISHMENT PREJUDICIAL
STREET WALKING ASS ANYWAY.

PATECUM
TGITM
  #107   Report Post  
Posted to sci.electronics.basics,sci.electronics.repair,alt.comp.hardware.pc-homebuilt,alt.home.repair
external usenet poster
 
Posts: 314
Default Name of plug in US

On May 2, 9:45*am, "Michael A. Terrell"
wrote:
spamtrap1888 wrote:

On May 1, 10:29 pm, "Michael A. Terrell"
wrote:
spamtrap1888 wrote:


The problem with both the RCA plug and the Motorola plug, compared to
other coaxial plugs, is that the hot lead makes contact before the
ground does.


* *That's because they were never intended to be plugged in to equipment
under power, due to leakage currents in the AC powered equipment. *There
is a Switchcraft version of the Phono/RCA that has a built in switch to
be used hot. It can be wired to short out the connector, until the plug
is inserted.


* *Explain want difference it would make on a car radio? *that is the
only application it was designed for.


A pin connected to a long metal rod, inserted into an amplifier input
-- what could possibly go wrong?


* *Nothing that you would understand. *Leave electronics to those who
know what they are doing, but practice your pathetic trolling somewhere
else.


Looks like someone put on the CRANKYPANTS this morning.

I note that all subsequent RF connectors were designed to connect the
shield first.
  #108   Report Post  
Posted to sci.electronics.basics,sci.electronics.repair,alt.comp.hardware.pc-homebuilt,alt.home.repair
external usenet poster
 
Posts: 8,589
Default Name of plug in US

On Sun, 1 May 2011 23:05:23 -0700 (PDT), Roy Quijano
wrote:

On May 2, 1:24*am, "Michael A. Terrell"
wrote:
John Fields wrote:

On Sun, 1 May 2011 14:18:38 -0700 (PDT), The Ghost in The Machine
wrote:


WE DONT CARE FOR YOUR INPUT.


---
"We"???


What group of loons has enjoined you as their spokesman?


* *Roy and all his dirty, crack smoking sock puppets:

Roy J Quijano
415 E 151st St
Bronx, NY 10455(718) 292-1943

* *He's the reason for my current sigfile.

--
You can't fix stupid. You can't even put a Band-Aid on it, because it's
Teflon coated.


You dirty low down Lying Libelous creep I've never done crack and I my
friends are not crackheads.
You're the one responsible for all the flaming going on...and the
author of several criminally abusive trolls.


You're such a liar, Roy.

Pray the charges I filed go though, in the long run you will be better
off than if Divine Justice gets you.


What a moron.

You Pathetic Cyberstalking Coward!


Pot, kettle, you're black as the ace of spades, Roy.

Go ahead bring your foolish fat face and confront me at my place.
We'll see who's wrong...you filthy flaming sack of nothingness.

Mr. Roy Quijano
Electrical Electronic Technician
Disabled


That's for sure. Mentally.

Bronx, NY USA 10455
"The trouble with some "educated" people is they forget they are but
children in Gods sight.


Some are just children, Roy. Now, go away.
  #109   Report Post  
Posted to sci.electronics.basics,sci.electronics.repair,alt.comp.hardware.pc-homebuilt,alt.home.repair
external usenet poster
 
Posts: 9
Default Name of plug in US

Jeff Liebermann wrote:

[snip]


Well, lets see what Google can offer. Searching for DE9, I get
70,100,000 hits, while DB9 returns 8,830,000 hits. So about 12% are
clueless.

Actually, it should be DE9S or DE9P, but that's being picky.


What would you call a connector the same size as a DE9, but has 15 pins? The
one used for video output from PCs.

[snip]

--
Mark Lloyd
http://notstupid.us

"Sacred cows make the tastiest hamburger." -- Abbie Hoffman
  #110   Report Post  
Posted to sci.electronics.basics,sci.electronics.repair,alt.comp.hardware.pc-homebuilt,alt.home.repair
external usenet poster
 
Posts: 12,924
Default Name of plug in US


spamtrap1888 wrote:

On May 2, 9:45 am, "Michael A. Terrell"
wrote:
spamtrap1888 wrote:

On May 1, 10:29 pm, "Michael A. Terrell"
wrote:
spamtrap1888 wrote:


The problem with both the RCA plug and the Motorola plug, compared to
other coaxial plugs, is that the hot lead makes contact before the
ground does.


That's because they were never intended to be plugged in to equipment
under power, due to leakage currents in the AC powered equipment. There
is a Switchcraft version of the Phono/RCA that has a built in switch to
be used hot. It can be wired to short out the connector, until the plug
is inserted.


Explain want difference it would make on a car radio? that is the
only application it was designed for.


A pin connected to a long metal rod, inserted into an amplifier input
-- what could possibly go wrong?


Nothing that you would understand. Leave electronics to those who
know what they are doing, but practice your pathetic trolling somewhere
else.


Looks like someone put on the CRANKYPANTS this morning.

I note that all subsequent RF connectors were designed to connect the
shield first.



Bull****. Go troll somewhere else, or read up on connectors.


--
You can't fix stupid. You can't even put a Band-Aid on it, because it's
Teflon coated.


  #111   Report Post  
Posted to sci.electronics.basics,sci.electronics.repair,alt.comp.hardware.pc-homebuilt,alt.home.repair
external usenet poster
 
Posts: 679
Default Name of plug in US

On May 2, 6:40*pm, "
wrote:
On Sun, 1 May 2011 23:05:23 -0700 (PDT), Roy Quijano





wrote:
On May 2, 1:24*am, "Michael A. Terrell"
wrote:
John Fields wrote:


On Sun, 1 May 2011 14:18:38 -0700 (PDT), The Ghost in The Machine
wrote:


WE DONT CARE FOR YOUR INPUT.


---
"We"???


What group of loons has enjoined you as their spokesman?


* *Roy and all his dirty, crack smoking sock puppets:


Roy J Quijano
415 E 151st St
Bronx, NY10455(718) 292-1943


* *He's the reason for my current sigfile.


--
You can't fix stupid. You can't even put a Band-Aid on it, because it's
Teflon coated.


You dirty low down Lying Libelous creep I've never done crack and I my
friends are not crackheads.
You're the one responsible for all the flaming going on...and the
author of several criminally abusive trolls.


You're such a liar, Roy.

Pray the charges I filed go though, in the long run you will be better
off than if Divine Justice gets you.


What a moron.

You Pathetic Cyberstalking Coward!


Pot, kettle, you're black as the ace of spades, Roy.

Go ahead bring your foolish fat face and confront me at my place.
We'll see who's wrong...you filthy flaming sack of nothingness.


Mr. Roy Quijano
Electrical Electronic Technician
Disabled


That's for sure. *Mentally.

Bronx, NY USA 10455
"The trouble with some "educated" people is they forget they are but
children in Gods sight.


Some are just children, Roy. *Now, go away.


SOME ARE JUST TROLLS TERRELL NOW **** OFF!

TGITM
  #112   Report Post  
Posted to sci.electronics.basics,sci.electronics.repair,alt.comp.hardware.pc-homebuilt,alt.home.repair
external usenet poster
 
Posts: 679
Default Name of plug in US

On May 2, 6:40*pm, "
wrote:
On Sun, 1 May 2011 23:05:23 -0700 (PDT), Roy Quijano





wrote:
On May 2, 1:24*am, "Michael A. Terrell"
wrote:
John Fields wrote:


On Sun, 1 May 2011 14:18:38 -0700 (PDT), The Ghost in The Machine
wrote:


WE DONT CARE FOR YOUR INPUT.


---
"We"???


What group of loons has enjoined you as their spokesman?


* *Roy and all his dirty, crack smoking sock puppets:


Roy J Quijano
415 E 151st St
Bronx, NY10455(718) 292-1943


* *He's the reason for my current sigfile.


--
You can't fix stupid. You can't even put a Band-Aid on it, because it's
Teflon coated.


You dirty low down Lying Libelous creep I've never done crack and I my
friends are not crackheads.
You're the one responsible for all the flaming going on...and the
author of several criminally abusive trolls.


You're such a liar, Roy.

Pray the charges I filed go though, in the long run you will be better
off than if Divine Justice gets you.


What a moron.

You Pathetic Cyberstalking Coward!


Pot, kettle, you're black as the ace of spades, Roy.

Go ahead bring your foolish fat face and confront me at my place.
We'll see who's wrong...you filthy flaming sack of nothingness.


Mr. Roy Quijano
Electrical Electronic Technician
Disabled


That's for sure. *Mentally.

Bronx, NY USA 10455
"The trouble with some "educated" people is they forget they are but
children in Gods sight.


Some are just children, Roy. *Now, go away.


ROY HAS THE RIGHT TO BE HERE YOU NASTY ANATHEMA ,
I BET YOU IF HIS LAST NAME WAS HAWKINS YOU WOULDNT BE DISRUPTING THE
GROUP TO RANT YOUR HOMOSEXUAL INTERNET PREJUDICE ABOUT HIM...
YOU FREAK..YOU NEED A FATHER FIGURE...GO JUMP IN THE OCEAN AND HUG
OSALAMI BIN LADENS REMAINS YOU FREAKY FOOL, THAT IS THE CLOSEST YOU
ARE GOING TO GET TO ONE.

TGITM
  #113   Report Post  
Posted to sci.electronics.basics,sci.electronics.repair,alt.comp.hardware.pc-homebuilt,alt.home.repair
external usenet poster
 
Posts: 21
Default Name of plug in US

"Man-wai Chang" wrote in message
...

http://www.amazon.co.uk/Cable-Tex-Co...163450&sr=8-10

What's the name of the plugs in USA?

It seems that USA televisions only use F Type connectors.

--
@~@ Might, Courage, Vision, SINCERITY.
/ v \ Simplicity is Beauty! May the Force and farces be with you!
/( _ )\ (x86_64 Ubuntu 9.10) Linux 2.6.38.4
^ ^ 19:36:01 up 5 days 23:37 1 user load average: 1.09 1.05 1.05
不借貸! 不詐騙! 不援交! 不打交! 不打劫! 不自殺! 請考慮綜援 (CSSA):
http://www.swd.gov.hk/tc/index/site_...sub_addressesa




My JVC came with one of these for the antenna connection. I believe its
called an N connector. MCM sells adapters, N to F connector, so does Radio
Shack.

  #114   Report Post  
Posted to sci.electronics.basics,sci.electronics.repair,alt.comp.hardware.pc-homebuilt,alt.home.repair
external usenet poster
 
Posts: 12,924
Default Name of plug in US


Deke wrote:

"Man-wai Chang" wrote in message
...

http://www.amazon.co.uk/Cable-Tex-Co...163450&sr=8-10

What's the name of the plugs in USA?

It seems that USA televisions only use F Type connectors.


My JVC came with one of these for the antenna connection. I believe its
called an N connector. MCM sells adapters, N to F connector, so does Radio
Shack.



This is a 'N' connector:

http://nocat.net/images/connectors/N.jpg

They are used for higher power & frequencies than what he posted, and
are not compatible. They were used at 4 GHz on early C-band satellite
LNAs as well as a lot of commercial and military communications
equipment.

They are constant impedance, and come in 50 and 75 ohm versions. A
50 ohm plug will damage a 75 ohm jack, due to the different diameters of
the center conductor.


--
You can't fix stupid. You can't even put a Band-Aid on it, because it's
Teflon coated.
  #115   Report Post  
Posted to sci.electronics.basics,sci.electronics.repair,alt.comp.hardware.pc-homebuilt,alt.home.repair
external usenet poster
 
Posts: 8,589
Default Name of plug in US

On Mon, 2 May 2011 23:09:11 -0700 (PDT), The Ghost in The Machine
wrote:

On May 2, 6:40*pm, "
wrote:
On Sun, 1 May 2011 23:05:23 -0700 (PDT), Roy Quijano





wrote:
On May 2, 1:24*am, "Michael A. Terrell"
wrote:
John Fields wrote:


On Sun, 1 May 2011 14:18:38 -0700 (PDT), The Ghost in The Machine
wrote:


WE DONT CARE FOR YOUR INPUT.


---
"We"???


What group of loons has enjoined you as their spokesman?


* *Roy and all his dirty, crack smoking sock puppets:


Roy J Quijano
415 E 151st St
Bronx, NY10455(718) 292-1943


* *He's the reason for my current sigfile.


--
You can't fix stupid. You can't even put a Band-Aid on it, because it's
Teflon coated.


You dirty low down Lying Libelous creep I've never done crack and I my
friends are not crackheads.
You're the one responsible for all the flaming going on...and the
author of several criminally abusive trolls.


You're such a liar, Roy.

Pray the charges I filed go though, in the long run you will be better
off than if Divine Justice gets you.


What a moron.

You Pathetic Cyberstalking Coward!


Pot, kettle, you're black as the ace of spades, Roy.

Go ahead bring your foolish fat face and confront me at my place.
We'll see who's wrong...you filthy flaming sack of nothingness.


Mr. Roy Quijano
Electrical Electronic Technician
Disabled


That's for sure. *Mentally.

Bronx, NY USA 10455
"The trouble with some "educated" people is they forget they are but
children in Gods sight.


Some are just children, Roy. *Now, go away.


SOME ARE JUST TROLLS TERRELL NOW **** OFF!


Some are totally illiterate, Roy.

TGITM


Penicillin is good for that.


  #116   Report Post  
Posted to sci.electronics.basics,sci.electronics.repair,alt.comp.hardware.pc-homebuilt,alt.home.repair
external usenet poster
 
Posts: 8,589
Default Name of plug in US

On Mon, 2 May 2011 23:55:31 -0700 (PDT), The Ghost in The Machine
wrote:

On May 2, 6:40*pm, "
wrote:
On Sun, 1 May 2011 23:05:23 -0700 (PDT), Roy Quijano





wrote:
On May 2, 1:24*am, "Michael A. Terrell"
wrote:
John Fields wrote:


On Sun, 1 May 2011 14:18:38 -0700 (PDT), The Ghost in The Machine
wrote:


WE DONT CARE FOR YOUR INPUT.


---
"We"???


What group of loons has enjoined you as their spokesman?


* *Roy and all his dirty, crack smoking sock puppets:


Roy J Quijano
415 E 151st St
Bronx, NY10455(718) 292-1943


* *He's the reason for my current sigfile.


--
You can't fix stupid. You can't even put a Band-Aid on it, because it's
Teflon coated.


You dirty low down Lying Libelous creep I've never done crack and I my
friends are not crackheads.
You're the one responsible for all the flaming going on...and the
author of several criminally abusive trolls.


You're such a liar, Roy.

Pray the charges I filed go though, in the long run you will be better
off than if Divine Justice gets you.


What a moron.

You Pathetic Cyberstalking Coward!


Pot, kettle, you're black as the ace of spades, Roy.

Go ahead bring your foolish fat face and confront me at my place.
We'll see who's wrong...you filthy flaming sack of nothingness.


Mr. Roy Quijano
Electrical Electronic Technician
Disabled


That's for sure. *Mentally.

Bronx, NY USA 10455
"The trouble with some "educated" people is they forget they are but
children in Gods sight.


Some are just children, Roy. *Now, go away.


ROY HAS THE RIGHT TO BE HERE YOU NASTY ANATHEMA ,


Roy, you really are illiterate. Of course, everyone has the right to be a
dickhead on the Usenet.

I BET YOU IF HIS LAST NAME WAS HAWKINS


Since that's not the case, Roy, does it matter what the bet is? You're just
an employed sparky, so it's not like you have anything worth betting anyway.

YOU WOULDNT BE DISRUPTING THE GROUP TO RANT YOUR HOMOSEXUAL INTERNET PREJUDICE ABOUT HIM...


No but you would, *Roy*. Constantly.

YOU FREAK..


Roy likes to call "black!".

YOU NEED A FATHER FIGURE...


Nope, but you need one to tan your squirrely ass.

GO JUMP IN THE OCEAN AND HUG
OSALAMI


"Osalami"? Roy, was that an intentional funny, or are you just being
illiterate, as usual?

BIN LADENS REMAINS YOU FREAKY FOOL, THAT IS THE CLOSEST YOU
ARE GOING TO GET TO ONE.


To get one? One what? What are you talking about your salami, again,
Queerjano? I've told you a hundred times, YOU'RE NOT MY TYPE! Now take your
advances elsewhere (DimBulb might take you out again, if you wear clean
knickers this time).

TGITM


Penicillin is good for that.
  #117   Report Post  
Posted to sci.electronics.basics,sci.electronics.repair,alt.comp.hardware.pc-homebuilt,alt.home.repair
external usenet poster
 
Posts: 679
Default Name of plug in US

On May 3, 6:40*pm, "
wrote:
On Mon, 2 May 2011 23:55:31 -0700 (PDT), The Ghost in The Machine





wrote:
On May 2, 6:40*pm, "
wrote:
On Sun, 1 May 2011 23:05:23 -0700 (PDT), Roy Quijano


wrote:
On May 2, 1:24*am, "Michael A. Terrell"
wrote:
John Fields wrote:


On Sun, 1 May 2011 14:18:38 -0700 (PDT), The Ghost in The Machine
wrote:


WE DONT CARE FOR YOUR INPUT.


---
"We"???


What group of loons has enjoined you as their spokesman?


* *Roy and all his dirty, crack smoking sock puppets:


Roy J Quijano
415 E 151st St
Bronx, NY10455(718) 292-1943


* *He's the reason for my current sigfile.


--
You can't fix stupid. You can't even put a Band-Aid on it, because it's
Teflon coated.


You dirty low down Lying Libelous creep I've never done crack and I my
friends are not crackheads.
You're the one responsible for all the flaming going on...and the
author of several criminally abusive trolls.


You're such a liar, Roy.


Pray the charges I filed go though, in the long run you will be better
off than if Divine Justice gets you.


What a moron.


You Pathetic Cyberstalking Coward!


Pot, kettle, you're black as the ace of spades, Roy.


Go ahead bring your foolish fat face and confront me at my place.
We'll see who's wrong...you filthy flaming sack of nothingness.


Mr. Roy Quijano
Electrical Electronic Technician
Disabled


That's for sure. *Mentally.


Bronx, NY USA 10455
"The trouble with some "educated" people is they forget they are but
children in Gods sight.


Some are just children, Roy. *Now, go away.


ROY HAS THE RIGHT TO BE HERE YOU NASTY ANATHEMA ,


Roy, you really are illiterate. *Of course, everyone has the right to be a
dickhead on the Usenet.

I BET YOU IF HIS LAST NAME WAS HAWKINS


Since that's not the case, Roy, does it matter what the bet is? *You're just
an employed sparky, so it's not like you have anything worth betting anyway.

YOU WOULDNT BE DISRUPTING THE GROUP TO RANT YOUR HOMOSEXUAL INTERNET PREJUDICE ABOUT HIM...


No but you would, *Roy*. *Constantly.

YOU FREAK..


Roy likes to call "black!".

YOU NEED A FATHER FIGURE...


Nope, but you need one to tan your squirrely ass.

GO JUMP IN THE OCEAN AND HUG
OSALAMI


"Osalami"? *Roy, was that an intentional funny, or are you just being
illiterate, as usual?

BIN LADENS REMAINS YOU FREAKY FOOL, THAT IS THE CLOSEST YOU
ARE GOING TO GET TO ONE.


To get one? *One what? *What are you talking about your salami, again,
Queerjano? *I've told you a hundred times, YOU'RE NOT MY TYPE! *Now take your
advances elsewhere (DimBulb might take you out again, if you wear clean
knickers this time).

TGITM


Penicillin is good for that.


GO TO HELL MICHAEL A.SSHOLE TERROLL YOU CROSS POSTING LOW LIFE MAGGOT.
I HOPE YOU GET KILLED SOON TOO....IT WILL BRING JOY TO EVERYONE NAMED
ROY OR QUIJANO.

TGITM
PATECUM
  #118   Report Post  
Posted to sci.electronics.basics,sci.electronics.repair,alt.comp.hardware.pc-homebuilt,alt.home.repair
external usenet poster
 
Posts: 8,589
Default Name of plug in US

On Tue, 3 May 2011 17:12:21 -0700 (PDT), The Ghost in The Machine
wrote:

On May 3, 6:40*pm, "
wrote:
On Mon, 2 May 2011 23:55:31 -0700 (PDT), The Ghost in The Machine





wrote:
On May 2, 6:40*pm, "
wrote:
On Sun, 1 May 2011 23:05:23 -0700 (PDT), Roy Quijano


wrote:
On May 2, 1:24*am, "Michael A. Terrell"
wrote:
John Fields wrote:


On Sun, 1 May 2011 14:18:38 -0700 (PDT), The Ghost in The Machine
wrote:


WE DONT CARE FOR YOUR INPUT.


---
"We"???


What group of loons has enjoined you as their spokesman?


* *Roy and all his dirty, crack smoking sock puppets:


Roy J Quijano
415 E 151st St
Bronx, NY10455(718) 292-1943


* *He's the reason for my current sigfile.


--
You can't fix stupid. You can't even put a Band-Aid on it, because it's
Teflon coated.


You dirty low down Lying Libelous creep I've never done crack and I my
friends are not crackheads.
You're the one responsible for all the flaming going on...and the
author of several criminally abusive trolls.


You're such a liar, Roy.


Pray the charges I filed go though, in the long run you will be better
off than if Divine Justice gets you.


What a moron.


You Pathetic Cyberstalking Coward!


Pot, kettle, you're black as the ace of spades, Roy.


Go ahead bring your foolish fat face and confront me at my place.
We'll see who's wrong...you filthy flaming sack of nothingness.


Mr. Roy Quijano
Electrical Electronic Technician
Disabled


That's for sure. *Mentally.


Bronx, NY USA 10455
"The trouble with some "educated" people is they forget they are but
children in Gods sight.


Some are just children, Roy. *Now, go away.


ROY HAS THE RIGHT TO BE HERE YOU NASTY ANATHEMA ,


Roy, you really are illiterate. *Of course, everyone has the right to be a
dickhead on the Usenet.

I BET YOU IF HIS LAST NAME WAS HAWKINS


Since that's not the case, Roy, does it matter what the bet is? *You're just
an employed sparky, so it's not like you have anything worth betting anyway.

YOU WOULDNT BE DISRUPTING THE GROUP TO RANT YOUR HOMOSEXUAL INTERNET PREJUDICE ABOUT HIM...


No but you would, *Roy*. *Constantly.

YOU FREAK..


Roy likes to call "black!".

YOU NEED A FATHER FIGURE...


Nope, but you need one to tan your squirrely ass.

GO JUMP IN THE OCEAN AND HUG
OSALAMI


"Osalami"? *Roy, was that an intentional funny, or are you just being
illiterate, as usual?

BIN LADENS REMAINS YOU FREAKY FOOL, THAT IS THE CLOSEST YOU
ARE GOING TO GET TO ONE.


To get one? *One what? *What are you talking about your salami, again,
Queerjano? *I've told you a hundred times, YOU'RE NOT MY TYPE! *Now take your
advances elsewhere (DimBulb might take you out again, if you wear clean
knickers this time).

TGITM


Penicillin is good for that.


GO TO HELL MICHAEL A.SSHOLE TERROLL YOU CROSS POSTING LOW LIFE MAGGOT.


Why don't you tell him that, Queerjano. You know where he hangs out.

I HOPE YOU GET KILLED SOON TOO....IT WILL BRING JOY TO EVERYONE NAMED
ROY OR QUIJANO.


Of course it would, Roy Queerjano, but it's not likely to happen. So sad.

TGITM


Penicillin will take care of that.

PATECUM


Come on, Pattie Eats Cum. Why did they name you that?
  #119   Report Post  
Posted to sci.electronics.basics,sci.electronics.repair,alt.comp.hardware.pc-homebuilt,alt.home.repair
external usenet poster
 
Posts: 679
Default Name of plug in US

On May 3, 8:34*pm, "
wrote:
On Tue, 3 May 2011 17:12:21 -0700 (PDT), The Ghost in The Machine





wrote:
On May 3, 6:40*pm, "
wrote:
On Mon, 2 May 2011 23:55:31 -0700 (PDT), The Ghost in The Machine


wrote:
On May 2, 6:40*pm, "
wrote:
On Sun, 1 May 2011 23:05:23 -0700 (PDT), Roy Quijano


wrote:
On May 2, 1:24*am, "Michael A. Terrell"
wrote:
John Fields wrote:


On Sun, 1 May 2011 14:18:38 -0700 (PDT), The Ghost in The Machine
wrote:


WE DONT CARE FOR YOUR INPUT.


---
"We"???


What group of loons has enjoined you as their spokesman?


* *Roy and all his dirty, crack smoking sock puppets:


Roy J Quijano
415 E 151st St
Bronx, NY10455(718) 292-1943


* *He's the reason for my current sigfile.


--
You can't fix stupid. You can't even put a Band-Aid on it, because it's
Teflon coated.


You dirty low down Lying Libelous creep I've never done crack and I my
friends are not crackheads.
You're the one responsible for all the flaming going on...and the
author of several criminally abusive trolls.


You're such a liar, Roy.


Pray the charges I filed go though, in the long run you will be better
off than if Divine Justice gets you.


What a moron.


You Pathetic Cyberstalking Coward!


Pot, kettle, you're black as the ace of spades, Roy.


Go ahead bring your foolish fat face and confront me at my place.
We'll see who's wrong...you filthy flaming sack of nothingness.


Mr. Roy Quijano
Electrical Electronic Technician
Disabled


That's for sure. *Mentally.


Bronx, NY USA 10455
"The trouble with some "educated" people is they forget they are but
children in Gods sight.


Some are just children, Roy. *Now, go away.


ROY HAS THE RIGHT TO BE HERE YOU NASTY ANATHEMA ,


Roy, you really are illiterate. *Of course, everyone has the right to be a
dickhead on the Usenet.


I BET YOU IF HIS LAST NAME WAS HAWKINS


Since that's not the case, Roy, does it matter what the bet is? *You're just
an employed sparky, so it's not like you have anything worth betting anyway.


YOU WOULDNT BE DISRUPTING THE GROUP TO RANT YOUR HOMOSEXUAL INTERNET PREJUDICE ABOUT HIM...


No but you would, *Roy*. *Constantly.


YOU FREAK..


Roy likes to call "black!".


YOU NEED A FATHER FIGURE...


Nope, but you need one to tan your squirrely ass.


GO JUMP IN THE OCEAN AND HUG
OSALAMI


"Osalami"? *Roy, was that an intentional funny, or are you just being
illiterate, as usual?


BIN LADENS REMAINS YOU FREAKY FOOL, THAT IS THE CLOSEST YOU
ARE GOING TO GET TO ONE.


To get one? *One what? *What are you talking about your salami, again,
Queerjano? *I've told you a hundred times, YOU'RE NOT MY TYPE! *Now take your
advances elsewhere (DimBulb might take you out again, if you wear clean
knickers this time).


TGITM


Penicillin is good for that.


GO TO HELL MICHAEL A.SSHOLE TERROLL YOU CROSS POSTING LOW LIFE MAGGOT.


Why don't you tell him that, Queerjano. *You know where he hangs out.

I HOPE YOU GET KILLED SOON TOO....IT WILL BRING JOY TO EVERYONE NAMED
ROY OR QUIJANO.


Of course it would, Roy Queerjano, but it's not likely to happen. *So sad.

TGITM


Penicillin will take care of that.

PATECUM


Come on, Pattie Eats Cum. *Why did they name you that?

WHAT's THE MATTER WHY ARENT YOU SUCH A MACHO WITH YOUR REAL NAME?
MICHAEL A. TERRELL....NO MATTER WHAT OR WHO YOU THINK I AM YOU ARE
DEAD WRONG.
AND YOU WILL PAY FOR IT.....IF ANYTHING IS REAL THAT IS WHERE YOUR AT.
EVERY DAY, EVERY NIGHT, EVERY MOMENT YOU PRESS ON THIS, YOU WILL ADD
TO YOUR SENTENCE.

IN THE MEANTIME GOD BLESS YOU....THAT IS QUITE A GIFT YOU HAVE....
TOO BAD YOU ARE WICKED WITH IT.

TGITM
  #120   Report Post  
Posted to sci.electronics.basics,sci.electronics.repair,alt.comp.hardware.pc-homebuilt,alt.home.repair
external usenet poster
 
Posts: 8,589
Default Name of plug in US

On Tue, 3 May 2011 18:01:33 -0700 (PDT), The Ghost in The Machine
wrote:

On May 3, 8:34*pm, "
wrote:
On Tue, 3 May 2011 17:12:21 -0700 (PDT), The Ghost in The Machine





wrote:
On May 3, 6:40*pm, "
wrote:
On Mon, 2 May 2011 23:55:31 -0700 (PDT), The Ghost in The Machine


wrote:
On May 2, 6:40*pm, "
wrote:
On Sun, 1 May 2011 23:05:23 -0700 (PDT), Roy Quijano


wrote:
On May 2, 1:24*am, "Michael A. Terrell"
wrote:
John Fields wrote:


On Sun, 1 May 2011 14:18:38 -0700 (PDT), The Ghost in The Machine
wrote:


WE DONT CARE FOR YOUR INPUT.


---
"We"???


What group of loons has enjoined you as their spokesman?


* *Roy and all his dirty, crack smoking sock puppets:


Roy J Quijano
415 E 151st St
Bronx, NY10455(718) 292-1943


* *He's the reason for my current sigfile.


--
You can't fix stupid. You can't even put a Band-Aid on it, because it's
Teflon coated.


You dirty low down Lying Libelous creep I've never done crack and I my
friends are not crackheads.
You're the one responsible for all the flaming going on...and the
author of several criminally abusive trolls.


You're such a liar, Roy.


Pray the charges I filed go though, in the long run you will be better
off than if Divine Justice gets you.


What a moron.


You Pathetic Cyberstalking Coward!


Pot, kettle, you're black as the ace of spades, Roy.


Go ahead bring your foolish fat face and confront me at my place.
We'll see who's wrong...you filthy flaming sack of nothingness.


Mr. Roy Quijano
Electrical Electronic Technician
Disabled


That's for sure. *Mentally.


Bronx, NY USA 10455
"The trouble with some "educated" people is they forget they are but
children in Gods sight.


Some are just children, Roy. *Now, go away.


ROY HAS THE RIGHT TO BE HERE YOU NASTY ANATHEMA ,


Roy, you really are illiterate. *Of course, everyone has the right to be a
dickhead on the Usenet.


I BET YOU IF HIS LAST NAME WAS HAWKINS


Since that's not the case, Roy, does it matter what the bet is? *You're just
an employed sparky, so it's not like you have anything worth betting anyway.


YOU WOULDNT BE DISRUPTING THE GROUP TO RANT YOUR HOMOSEXUAL INTERNET PREJUDICE ABOUT HIM...


No but you would, *Roy*. *Constantly.


YOU FREAK..


Roy likes to call "black!".


YOU NEED A FATHER FIGURE...


Nope, but you need one to tan your squirrely ass.


GO JUMP IN THE OCEAN AND HUG
OSALAMI


"Osalami"? *Roy, was that an intentional funny, or are you just being
illiterate, as usual?


BIN LADENS REMAINS YOU FREAKY FOOL, THAT IS THE CLOSEST YOU
ARE GOING TO GET TO ONE.


To get one? *One what? *What are you talking about your salami, again,
Queerjano? *I've told you a hundred times, YOU'RE NOT MY TYPE! *Now take your
advances elsewhere (DimBulb might take you out again, if you wear clean
knickers this time).


TGITM


Penicillin is good for that.


GO TO HELL MICHAEL A.SSHOLE TERROLL YOU CROSS POSTING LOW LIFE MAGGOT.


Why don't you tell him that, Queerjano. *You know where he hangs out.

I HOPE YOU GET KILLED SOON TOO....IT WILL BRING JOY TO EVERYONE NAMED
ROY OR QUIJANO.


Of course it would, Roy Queerjano, but it's not likely to happen. *So sad.

TGITM


Penicillin will take care of that.

PATECUM


Come on, Pattie Eats Cum. *Why did they name you that?

WHAT's THE MATTER WHY ARENT YOU SUCH A MACHO WITH YOUR REAL NAME?


You're just too stupid to get it.

MICHAEL A. TERRELL....NO MATTER WHAT OR WHO YOU THINK I AM YOU ARE
DEAD WRONG.


No, Roy Queerjano, it's you who is wrong and too stupid to be able to grok
just how wrong.

AND YOU WILL PAY FOR IT.....


Is that another threat, Qeerjano?

IF ANYTHING IS REAL THAT IS WHERE YOUR AT.


Where I'm at? Certainly it's real. You're the loser living in a fantasy
world.

EVERY DAY, EVERY NIGHT, EVERY MOMENT YOU PRESS ON THIS, YOU WILL ADD
TO YOUR SENTENCE.


Ohh, I'm so skeer'd.

IN THE MEANTIME GOD BLESS YOU....


If you would go away, your dream would come true.

THAT IS QUITE A GIFT YOU HAVE....


It certainly is. Too bad you're too stupid to understand even what you write.

TOO BAD YOU ARE WICKED WITH IT.


You could put a stop to it. Easily.

TGITM


Do get some penicillin for that.
Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
2 prong plug made into working 3 prong plug? David Nebenzahl Home Repair 1 November 17th 10 12:00 AM
swapping an oven plug for a clothes dryer plug pstock Home Repair 14 October 8th 10 05:54 PM
swapping an oven plug for a clothes dryer plug Jerry - OHIO Home Repair 0 October 7th 10 04:06 AM
Advice for converting Sears Craftsman 220V compressor plug to washing machine plug Elmo[_6_] Home Repair 82 July 28th 10 03:43 PM
Rewire oven plug 3 to 4 wire, new home, plug it in and get sparks [email protected] Home Repair 3 August 16th 05 02:51 PM


All times are GMT +1. The time now is 02:40 AM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2004-2024 DIYbanter.
The comments are property of their posters.
 

About Us

"It's about DIY & home improvement"