Home |
Search |
Today's Posts |
|
Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems. |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to sci.electronics.repair
|
|||
|
|||
Yamaha PF 1000 piano , 2002
Do they want repairers to use the included ,single, off-centre steel rod
prop, when the top is open , to slip out of the next to non existant holding position on the floppy drive housing , so they do fatal damage when the whole wooden top with main pcb and display etc, crashes down? A bit of a workup disconnecting wiring looms and screening cover but a hell of a lot safer for collateral damage and personal safety, totally removing the top section. |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Yamaha P120, electric piano, broken key | Electronics Repair | |||
Yamaha Piano pedal mechanism | Electronics Repair | |||
QUESTION: Yamaha MX-1000 Power Amplifier Problem | Electronics Repair | |||
Yamaha P120 piano, 2004 | Electronics Repair | |||
Best Screw of 2002 | UK diy |