Heysan,

This newsletter is created just in case, if someone need the informations.

1.
How to open the cover

The monitor can be separated by sliding a thick guitar (plastic) pick along
the edge where the two halves meet.

See perhaps picture ...
https://sites.google.com/site/kallfi...open-the-cover

2.
How to repair power-off

I found 3 defect capacittors (10v 1000 µF), named C823, C824 and C825
and replaced them with 16v 1000 µF.

See perhaps picture ...
https://sites.google.com/site/kallfi...5-fp/power-off


With kind regards,
Mogens Kall, The servant of Michael.
--
Coming up news: Iran hit by a Asteroid. Iran is no more (Jer.49,34-)
Last OUTPUT: 11419
Info http://groups.google.dk/group/dk.tes...1d03940b49201e
Website https://sites.google.com/site/kalltree1 File no: 11423

On Tue, 03 Aug 2010 00:37:28 +0200, Kall, Mogens wrote:

Heysan,

This newsletter is created just in case, if someone need the informations.

1.
How to open the cover

The monitor can be separated by sliding a thick guitar (plastic) pick along
the edge where the two halves meet.

See perhaps picture ...
https://sites.google.com/site/kallfi...open-the-cover

2.
How to repair power-off

I found 3 defect capacittors (10v 1000 µF), named C823, C824 and C825
and replaced them with 16v 1000 µF.

See perhaps picture ...
https://sites.google.com/site/kallfi...5-fp/power-off


With kind regards,
Mogens Kall, The servant of Michael.

How did you determine the capacitors were defective? Visually or test?

"Mat" wrote ...

Sent: Tuesday, August 03, 2010, CET 02:40, GMT 00:40
news http://groups.google.dk/group/sci.el...298932cf84caa2

On Tue, 03 Aug 2010 00:37:28 +0200, Kall, Mogens wrote:

Change language ...

http://translate.google.com/translat...e2557b611c8676

Heysan,

This newsletter is created just in case, if someone need the informations.

1.
How to open the cover

The monitor can be separated by sliding a thick guitar (plastic) pick along
the edge where the two halves meet.

See perhaps picture ...
https://sites.google.com/site/kallfi...open-the-cover

2.
How to repair power-off

I found 3 defect capacittors (10v 1000 µF), named C823, C824 and C825
and replaced them with 16v 1000 µF.

See perhaps picture ...
https://sites.google.com/site/kallfi...5-fp/power-off


With kind regards,
Mogens Kall, The servant of Michael.

How did you determine the capacitors were defective? Visually or test?


(Sorry, but my english is very bad, but I shall try to do my best

Well, ...

As You can see on my website, I found some advice, before I started,
so I knew, what I perhaps should look after.

(The advise was not so easy to find and a "little" bit defuse.)

when I opened the cover, there were non capacitors (10v 100 µF), but on
the output voltage, there was another one (10v 1000 µF).

It looked like, it was going to blow up, and this is normaly a sign of defect.

(2 other capacitore looked in the same way.)


So my answer is ... visually.


I tested then afterwards, and non of them seems to be wrong (on low voltage)!

But because of the advice, I replaced them, and the monitor then worked
again ... :-)



File no: 11424

On Tue, 03 Aug 2010 13:32:38 +0200, Kall, Mogens wrote:

"Mat" wrote ...

Sent: Tuesday, August 03, 2010, CET 02:40, GMT 00:40
news http://groups.google.dk/group/sci.el...298932cf84caa2

On Tue, 03 Aug 2010 00:37:28 +0200, Kall, Mogens wrote:

Change language ...

http://translate.google.com/translat...e2557b611c8676

Heysan,

This newsletter is created just in case, if someone need the informations.

1.
How to open the cover

The monitor can be separated by sliding a thick guitar (plastic) pick along
the edge where the two halves meet.

See perhaps picture ...
https://sites.google.com/site/kallfi...open-the-cover

2.
How to repair power-off

I found 3 defect capacittors (10v 1000 µF), named C823, C824 and C825
and replaced them with 16v 1000 µF.

See perhaps picture ...
https://sites.google.com/site/kallfi...5-fp/power-off


With kind regards,
Mogens Kall, The servant of Michael.

How did you determine the capacitors were defective? Visually or test?


(Sorry, but my english is very bad, but I shall try to do my best

Well, ...

As You can see on my website, I found some advice, before I started,
so I knew, what I perhaps should look after.

(The advise was not so easy to find and a "little" bit defuse.)

when I opened the cover, there were non capacitors (10v 100 µF), but on
the output voltage, there was another one (10v 1000 µF).

It looked like, it was going to blow up, and this is normaly a sign of defect.

(2 other capacitore looked in the same way.)


So my answer is ... visually.


I tested then afterwards, and non of them seems to be wrong (on low voltage)!

But because of the advice, I replaced them, and the monitor then worked
again ... :-)



File no: 11424


Thanks, English is fine. I remember I got a free 5.1 receiver and
speakers that was not working. Found a bad cap (buldging) in the subwoofer
and shorted speaker. Fixed good as new for basically nothing.