Home |
Search |
Today's Posts |
|
Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to sci.electronics.repair
|
|||
|
|||
Wax conformal coating over SM
So quite low temperature hot air will melt it but how to remove what remains
after allowing most to drip away? tissue paper as capillary mop? or a chemical ? . I don't know if it is a reaction with the ink on the device markings but the wax residue/oil makes it very difficult to read even under x30 microscope barrrel and various angles of light. Any ideas on how to increase the contrast/readability? |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Conformal coating breakdown. | Electronics Repair | |||
DIY powder coating | Metalworking | |||
What Is Elastromeric Coating | Home Repair | |||
powder coating? | Metalworking | |||
OT - Teflon Coating | Metalworking |