Bit of plastic ring with 3 internal springs and wedges that grips the disc
but comes off the metal spindle with the CD. Other than dot of superglue and
capilliary flow into the join , any recognised way of refixing? Reminds me
of those ex-juke box 45rpm singles with adaptor for home use

"N_Cook" wrote in message
...
Bit of plastic ring with 3 internal springs and wedges that grips the disc
but comes off the metal spindle with the CD. Other than dot of superglue
and
capilliary flow into the join , any recognised way of refixing? Reminds me
of those ex-juke box 45rpm singles with adaptor for home use



I always just put a tiny drop of superglue on the top of the shaft, and then
press the turntable back on, having first determined what the correct height
setting is, as the turntable tends to grip to the shaft very quickly ...
Don't overdo it on the glue though, as you don't want to press any down the
shaft and into the top bearing :-\

Arfa

Arfa Daily wrote in message
...

"N_Cook" wrote in message
...
Bit of plastic ring with 3 internal springs and wedges that grips the
disc
but comes off the metal spindle with the CD. Other than dot of superglue
and
capilliary flow into the join , any recognised way of refixing? Reminds
me
of those ex-juke box 45rpm singles with adaptor for home use



I always just put a tiny drop of superglue on the top of the shaft, and
then
press the turntable back on, having first determined what the correct
height
setting is, as the turntable tends to grip to the shaft very quickly ...
Don't overdo it on the glue though, as you don't want to press any down
the
shaft and into the top bearing :-\

Arfa



I tend to find superglue is some sort of super-fluid , almost totally
lacking in viscosity and migrates along interference fits rather too easily.
As occuring in a laptop drive, the bearing would be only just below the
platter.

On Tue, 18 May 2010 14:33:59 +0100, N_Cook wrote:

Arfa Daily wrote in message
...

"N_Cook" wrote in message
...
Bit of plastic ring with 3 internal springs and wedges that grips the
disc
but comes off the metal spindle with the CD. Other than dot of
superglue and
capilliary flow into the join , any recognised way of refixing?
Reminds
me
of those ex-juke box 45rpm singles with adaptor for home use



I always just put a tiny drop of superglue on the top of the shaft, and
then
press the turntable back on, having first determined what the correct
height
setting is, as the turntable tends to grip to the shaft very quickly
... Don't overdo it on the glue though, as you don't want to press any
down
the
shaft and into the top bearing :-\

Arfa



I tend to find superglue is some sort of super-fluid , almost totally
lacking in viscosity and migrates along interference fits rather too
easily. As occuring in a laptop drive, the bearing would be only just
below the platter.

But can't you buy gel?

"Meat Plow" wrote in message
news
On Tue, 18 May 2010 14:33:59 +0100, N_Cook wrote:

Arfa Daily wrote in message
...

"N_Cook" wrote in message
...
Bit of plastic ring with 3 internal springs and wedges that grips the
disc
but comes off the metal spindle with the CD. Other than dot of
superglue and
capilliary flow into the join , any recognised way of refixing?
Reminds
me
of those ex-juke box 45rpm singles with adaptor for home use



I always just put a tiny drop of superglue on the top of the shaft, and
then
press the turntable back on, having first determined what the correct
height
setting is, as the turntable tends to grip to the shaft very quickly
... Don't overdo it on the glue though, as you don't want to press any
down
the
shaft and into the top bearing :-\

Arfa



I tend to find superglue is some sort of super-fluid , almost totally
lacking in viscosity and migrates along interference fits rather too
easily. As occuring in a laptop drive, the bearing would be only just
below the platter.

But can't you buy gel?


You can, yes, but the stuff I use comes on a card of like 12 tubes from the
local supermarket, and costs a coupla quid ($3). It works better than all of
the named brands, and is reasonably gloopy, whilst still being a good
liquid - if you see what I mean ...

To be honest, to be on the safe side, whenever I am glueing anything close
to a moving part such as a motor bearing, I tend to put a small amount of
oil or grease as appropriate into it. Then, if any superglue does find its
way by migration or spillage, it doesn't actually stick to what it
shouldn't.

Arfa

On Tue, 18 May 2010 16:24:33 +0100, Arfa Daily wrote:

"Meat Plow" wrote in message
news
On Tue, 18 May 2010 14:33:59 +0100, N_Cook wrote:

Arfa Daily wrote in message
...

"N_Cook" wrote in message
...
Bit of plastic ring with 3 internal springs and wedges that grips
the
disc
but comes off the metal spindle with the CD. Other than dot of
superglue and
capilliary flow into the join , any recognised way of refixing?
Reminds
me
of those ex-juke box 45rpm singles with adaptor for home use



I always just put a tiny drop of superglue on the top of the shaft,
and
then
press the turntable back on, having first determined what the correct
height
setting is, as the turntable tends to grip to the shaft very quickly
... Don't overdo it on the glue though, as you don't want to press
any down
the
shaft and into the top bearing :-\

Arfa



I tend to find superglue is some sort of super-fluid , almost totally
lacking in viscosity and migrates along interference fits rather too
easily. As occuring in a laptop drive, the bearing would be only just
below the platter.

But can't you buy gel?


You can, yes, but the stuff I use comes on a card of like 12 tubes from
the local supermarket, and costs a coupla quid ($3). It works better
than all of the named brands, and is reasonably gloopy, whilst still
being a good liquid - if you see what I mean ...

To be honest, to be on the safe side, whenever I am glueing anything
close to a moving part such as a motor bearing, I tend to put a small
amount of oil or grease as appropriate into it. Then, if any superglue
does find its way by migration or spillage, it doesn't actually stick to
what it shouldn't.


Or just hang it opposite of the pull of gravity while the glue dries

Ended up with drop of superglue and capilliary and kept the platter spinning
for an hour with a small motor and O ring over plastic drive pulley. Didn't
like the idea of playing CD for that time as not sure what vapours would
come off in an enclosed space