Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems.

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
Posted to sci.electronics.repair
external usenet poster
 
Posts: 1
Default Identify HP board?

I was going through an old box of stuff that I bought many years ago, and
ran across a couple little HP boards (approx 3 ¼" x 1 1/8"). These appear to
be NOS, and have HP part number 00970-66501 (Rev 1) screened on the back of
it, but I can't find any information about that part number.

Anyone have any idea on what this board might be? I do have pictures of the
front and back, if anyone wants to take a look at those.

Thanks!
Dave

  #2   Report Post  
Posted to sci.electronics.repair
external usenet poster
 
Posts: 324
Default Identify HP board?

David Hanes Inscribed thus:

I was going through an old box of stuff that I bought many years ago,
and ran across a couple little HP boards (approx 3 ¼" x 1 1/8"). These
appear to be NOS, and have HP part number 00970-66501 (Rev 1) screened
on the back of it, but I can't find any information about that part
number.

Anyone have any idea on what this board might be? I do have pictures
of the front and back, if anyone wants to take a look at those.

Thanks!
Dave


Lets have a look at the pictures.

--
Best Regards:
Baron.
Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Schematic?: Maytag Washing Machine Control Board (or Board itself) [email protected] Home Repair 9 February 21st 13 10:26 PM
0.8mm pitch board to board surface mount connector needed. Please help if you can. kel-fbs Electronics Repair 0 November 18th 06 11:10 PM
Hardibacker board vs Cement board for Garage/Mudroom shower. Jack Home Repair 9 September 16th 06 03:25 PM
Schematic?: Maytag Washing Machine Control Board (or board itself) [email protected] UK diy 3 April 4th 05 06:07 PM
Schematic?: Maytag Washing Machine Control Board (or Board itself) [email protected] Home Ownership 0 April 2nd 05 12:36 AM


All times are GMT +1. The time now is 02:43 AM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 DIYbanter.
The comments are property of their posters.
 

About Us

"It's about DIY & home improvement"