Home |
Search |
Today's Posts |
![]() |
|
Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems. |
|
LinkBack | Thread Tools | Display Modes |
#12
![]()
Posted to sci.electronics.repair,uk.d-i-y
|
|||
|
|||
![]()
William Sommerwerck wrote:
That may be a different story because PAL TV sets never had them. NTSC sets needed them because the phase of the color carrier wandered and often shifted to the green, while PAL sets reset the phase each line and therefore were always "correct". NTSC does not, and never had, an inherent problem with phase stability. I cant conclude anything, but I know 2 things: 1. NTSC is widely known as Never The Same Color twice 2. The PAL system includes measures to counter phase shift causing colour issues, so I can only conclude that the system engineers thought this was a problem with NTSC. I don't have the time to discuss this at length, but NTSC's unfortunate reverse-acronym was the result of poor studio standards, and is not inherent in the system. It is. Multipath effects caused unacceptable phase and color shifts. NTSC worked fine on cable, but never as a medium for over air transmissin with any HINT of multipath. PAL incorporated phase alternation to partly compensate for transmission problems (non-linear group delay) in Europe. sorry, that's a factor of ANY RF tranmission where more than one path to teh receiver exists. And fwiw, IIUC PAL rendered colours are designed to alternate the error line after line rather than get each line colour correct, so like many such measures it usually solves the problem, but not always. Correct. That's why color errors roughly cancelled out, at the expense of loss of satruation. ? huh? |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Follow-up on What is this? | Electronics Repair | |||
JD-455 fix follow-up | Metalworking | |||
Follow-up | Woodworking | |||
just a follow up | Home Repair |