Home |
Search |
Today's Posts |
|
Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
|
#1
Posted to sci.electronics.repair
|
|||
|
|||
Tektronix 2445b with problem
I have a problem with my 2445b, when that powers up and stops at the
"add" button when doing the initial tests. Has anybody had the same problem an d fix it? |
#2
Posted to sci.electronics.repair
|
|||
|
|||
Tektronix 2445b with problem
Bestmimo wrote:
I have a problem with my 2445b, when that powers up and stops at the "add" button when doing the initial tests. Has anybody had the same problem an d fix it? BAMA has the manual for download. ftp://bama.sbc.edu/downloads/tek/2445/ I didn't see your problem in a quick skim of the troubleshooting section, but you might be able to get more info from the diagnostics. |
#3
Posted to sci.electronics.repair
|
|||
|
|||
Tektronix 2445b with problem
Shawn D'Alimonte wrote in
: Bestmimo wrote: I have a problem with my 2445b, when that powers up and stops at the "add" button when doing the initial tests. Has anybody had the same problem an d fix it? Perhaps a stuck front panel switch or button. That's one of the startup tests. the lit front panel lights make up a trouble code that is described in the Maintenance Section. BAMA has the manual for download. ftp://bama.sbc.edu/downloads/tek/2445/ I didn't see your problem in a quick skim of the troubleshooting section, but you might be able to get more info from the diagnostics. BAMA now wants a password to download,but their mirror site doesn't. BTW,the Dallas NVRAM IC is right at the 10 yr age limit in the IC data sheets,so loss of calibration data is possible. -- Jim Yanik jyanik at kua.net |
#4
Posted to sci.electronics.repair
|
|||
|
|||
Tektronix 2445b with problem
On 2 Apr 2009 13:29:03 GMT, Jim Yanik wrote:
BAMA now wants a password to download,but their mirror site doesn't. Not exactly. When I try it via FTP, I get asked for a password. However, the error message when I hit cancel results in: 530 The maximum number of anonymous FTP users (10) are already connected... try back in a few minutes. I can't tell if this is an intentional new policy or a misconfigured ftp server. I'll guess(tm) the latter. -- Jeff Liebermann 150 Felker St #D http://www.LearnByDestroying.com Santa Cruz CA 95060 http://802.11junk.com Skype: JeffLiebermann AE6KS 831-336-2558 |
#5
Posted to sci.electronics.repair
|
|||
|
|||
Tektronix 2445b with problem
In article ,
Jeff Liebermann wrote: Not exactly. When I try it via FTP, I get asked for a password. However, the error message when I hit cancel results in: 530 The maximum number of anonymous FTP users (10) are already connected... try back in a few minutes. I can't tell if this is an intentional new policy or a misconfigured ftp server. I'll guess(tm) the latter. Neither. They've had this policy and practice for as long as I can remember using BAMA. Either try back later when they're less heavily loaded, or use the edebris mirror. -- Dave Platt AE6EO Friends of Jade Warrior home page: http://www.radagast.org/jade-warrior I do _not_ wish to receive unsolicited commercial email, and I will boycott any company which has the gall to send me such ads! |
#7
Posted to sci.electronics.repair
|
|||
|
|||
Tektronix 2445b with problem
Dave Platt wrote:
In article , Jeff Liebermann wrote: Not exactly. When I try it via FTP, I get asked for a password. However, the error message when I hit cancel results in: 530 The maximum number of anonymous FTP users (10) are already connected... try back in a few minutes. I can't tell if this is an intentional new policy or a misconfigured ftp server. I'll guess(tm) the latter. Neither. They've had this policy and practice for as long as I can remember using BAMA. Either try back later when they're less heavily loaded, or use the edebris mirror. What's the URL for the mirror site? -- W . | ,. w , "Some people are alive only because \|/ \|/ it is illegal to kill them." Perna condita delenda est ---^----^--------------------------------------------------------------- |
#8
Posted to sci.electronics.repair
|
|||
|
|||
Tektronix 2445b with problem
On Thu, 02 Apr 2009 10:02:48 -0700, Jeff Liebermann
wrote: On 2 Apr 2009 13:29:03 GMT, Jim Yanik wrote: BAMA now wants a password to download,but their mirror site doesn't. Not exactly. When I try it via FTP, I get asked for a password. However, the error message when I hit cancel results in: 530 The maximum number of anonymous FTP users (10) are already connected... try back in a few minutes. I can't tell if this is an intentional new policy or a misconfigured ftp server. I'll guess(tm) the latter. The message is 100% correct, just try later. Not a configuration error, the site wishes to limit the max number of users, that's all! g The mirror site(s) don't seem to be as limited, try them. |
#9
Posted to sci.electronics.repair
|
|||
|
|||
Tektronix 2445b with problem
Jeff Liebermann wrote: On 2 Apr 2009 13:29:03 GMT, Jim Yanik wrote: BAMA now wants a password to download,but their mirror site doesn't. Not exactly. When I try it via FTP, I get asked for a password. However, the error message when I hit cancel results in: 530 The maximum number of anonymous FTP users (10) are already connected... try back in a few minutes. I can't tell if this is an intentional new policy or a misconfigured ftp server. I'll guess(tm) the latter. Both BAMA sites are on donated space. The original is only allowed 10 simultaneous users, but the other server allows a lot more connections. -- And another motherboard bites the dust! |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Tektronix 2445B Scope Problem , Help needed (Video Included) | Electronics Repair | |||
Tektronix 422 charger problem | Electronics Repair | |||
Tektronix 465B problem | Electronics Repair | |||
Tektronix 465M HV problem | Electronics Repair | |||
Tektronix 466 Scope Problem | Electronics Repair |