Tektronix 2445b with problem
 

I have a problem with my 2445b, when that powers up and stops at the
"add" button when doing the initial tests.
Has anybody had the same problem an d fix it?

Tektronix 2445b with problem
 

Bestmimo wrote:
I have a problem with my 2445b, when that powers up and stops at the
"add" button when doing the initial tests.
Has anybody had the same problem an d fix it?

BAMA has the manual for download. ftp://bama.sbc.edu/downloads/tek/2445/

I didn't see your problem in a quick skim of the troubleshooting
section, but you might be able to get more info from the diagnostics.

Tektronix 2445b with problem
 

Shawn D'Alimonte wrote in
:

Bestmimo wrote:
I have a problem with my 2445b, when that powers up and stops at the
"add" button when doing the initial tests.
Has anybody had the same problem an d fix it?


Perhaps a stuck front panel switch or button.
That's one of the startup tests.
the lit front panel lights make up a trouble code that is described in the
Maintenance Section.

BAMA has the manual for download. ftp://bama.sbc.edu/downloads/tek/2445/

I didn't see your problem in a quick skim of the troubleshooting
section, but you might be able to get more info from the diagnostics.


BAMA now wants a password to download,but their mirror site doesn't.

BTW,the Dallas NVRAM IC is right at the 10 yr age limit in the IC data
sheets,so loss of calibration data is possible.

--
Jim Yanik
jyanik
at
kua.net

Tektronix 2445b with problem
 

On 2 Apr 2009 13:29:03 GMT, Jim Yanik wrote:

BAMA now wants a password to download,but their mirror site doesn't.

Not exactly. When I try it via FTP, I get asked for a password.
However, the error message when I hit cancel results in:

530 The maximum number of anonymous FTP users (10) are already
connected... try back in a few minutes.

I can't tell if this is an intentional new policy or a misconfigured
ftp server. I'll guess(tm) the latter.

--
Jeff Liebermann
150 Felker St #D http://www.LearnByDestroying.com
Santa Cruz CA 95060 http://802.11junk.com
Skype: JeffLiebermann AE6KS 831-336-2558

Tektronix 2445b with problem
 

In article ,
Jeff Liebermann wrote:

Not exactly. When I try it via FTP, I get asked for a password.
However, the error message when I hit cancel results in:

530 The maximum number of anonymous FTP users (10) are already
connected... try back in a few minutes.

I can't tell if this is an intentional new policy or a misconfigured
ftp server. I'll guess(tm) the latter.

Neither. They've had this policy and practice for as long as I can
remember using BAMA.

Either try back later when they're less heavily loaded, or use the
edebris mirror.

--
Dave Platt AE6EO
Friends of Jade Warrior home page: http://www.radagast.org/jade-warrior
I do _not_ wish to receive unsolicited commercial email, and I will
boycott any company which has the gall to send me such ads!

Tektronix 2445b with problem
 

On Thu, 02 Apr 2009 10:02:48 -0700, Jeff Liebermann
wrote:

On 2 Apr 2009 13:29:03 GMT, Jim Yanik wrote:

BAMA now wants a password to download,but their mirror site doesn't.

Not exactly. When I try it via FTP, I get asked for a password.
However, the error message when I hit cancel results in:

530 The maximum number of anonymous FTP users (10) are already
connected... try back in a few minutes.

I can't tell if this is an intentional new policy or a misconfigured
ftp server. I'll guess(tm) the latter.

The message is 100% correct, just try later. Not a configuration
error, the site wishes to limit the max number of users, that's all!
g

The mirror site(s) don't seem to be as limited, try them.

Tektronix 2445b with problem
 

Jeff Liebermann wrote:

On 2 Apr 2009 13:29:03 GMT, Jim Yanik wrote:

BAMA now wants a password to download,but their mirror site doesn't.

Not exactly. When I try it via FTP, I get asked for a password.
However, the error message when I hit cancel results in:

530 The maximum number of anonymous FTP users (10) are already
connected... try back in a few minutes.

I can't tell if this is an intentional new policy or a misconfigured
ftp server. I'll guess(tm) the latter.


Both BAMA sites are on donated space. The original is only allowed
10 simultaneous users, but the other server allows a lot more
connections.


--
And another motherboard bites the dust!

Tektronix 2445b with problem
 

On Thu, 2 Apr 2009 11:40:51 -0700, (Dave Platt)
wrote:

In article ,
Jeff Liebermann wrote:

Not exactly. When I try it via FTP, I get asked for a password.
However, the error message when I hit cancel results in:

530 The maximum number of anonymous FTP users (10) are already
connected... try back in a few minutes.

I can't tell if this is an intentional new policy or a misconfigured
ftp server. I'll guess(tm) the latter.

Neither. They've had this policy and practice for as long as I can
remember using BAMA.

Either try back later when they're less heavily loaded, or use the
edebris mirror.

Thanks. I've used the original BAMA site a few times over the years
and have never seen the user limit message, until yesterday. Luck and
my perfect timing as usual. Thanks.

--
Jeff Liebermann
150 Felker St #D http://www.LearnByDestroying.com
Santa Cruz CA 95060 http://802.11junk.com
Skype: JeffLiebermann AE6KS 831-336-2558

Tektronix 2445b with problem
 

Hi, how I can tell, when I put on the oscilloscope, the traces come on
like a flash, and it start the test, put it can´t finish the test
because it´s stop!
And it´s stop at the add button.
What I need to certificate?

Bests regards

Tektronix 2445b with problem
 

"Bestmimo" wrote:
Hi, how I can tell, when I put on the oscilloscope, the traces come on
like a flash, and it start the test, put it can´t finish the test

Verify that the unit is not in single shot mode.

Jon

Tektronix 2445b with problem
 

Jeff Liebermann wrote in
:

On Thu, 2 Apr 2009 11:40:51 -0700, (Dave Platt)
wrote:

In article ,
Jeff Liebermann wrote:

Not exactly. When I try it via FTP, I get asked for a password.
However, the error message when I hit cancel results in:

530 The maximum number of anonymous FTP users (10) are already
connected... try back in a few minutes.

I can't tell if this is an intentional new policy or a misconfigured
ftp server. I'll guess(tm) the latter.

Neither. They've had this policy and practice for as long as I can
remember using BAMA.

Either try back later when they're less heavily loaded, or use the
edebris mirror.

Thanks. I've used the original BAMA site a few times over the years
and have never seen the user limit message, until yesterday. Luck and
my perfect timing as usual. Thanks.


I downloaded a 2465B manual a few weeks ago from BAMA,had no problem,then
the other day I got the password crap.The mirror site worked fine.

--
Jim Yanik
jyanik
at
kua.net

Tektronix 2445b with problem
 

"Jon Danniken" wrote in
:

"Bestmimo" wrote:
Hi, how I can tell, when I put on the oscilloscope, the traces come on
like a flash, and it start the test, put it can´t finish the test

do you get any CRT display? Like "Fail Test 04-11" on the Readout line?
or no display at all?

Verify that the unit is not in single shot mode.

Jon




it's going into startup diagnostic test,then stops.
could be a stuck front panel button or switch,or a hardware problem.(on the
A5 microprocessor board.)Probably a hardware problem.
the front panel LEDs light to give a preliminary error code.
the manual Maintenance Section(Sec.6) has the info for this.

--
Jim Yanik
jyanik
at
kua.net

Tektronix 2445b with problem
 

Dave Platt wrote:
In article ,
Jeff Liebermann wrote:

Not exactly. When I try it via FTP, I get asked for a password.
However, the error message when I hit cancel results in:

530 The maximum number of anonymous FTP users (10) are already
connected... try back in a few minutes.

I can't tell if this is an intentional new policy or a misconfigured
ftp server. I'll guess(tm) the latter.

Neither. They've had this policy and practice for as long as I can
remember using BAMA.

Either try back later when they're less heavily loaded, or use the
edebris mirror.

What's the URL for the mirror site?


--
W
. | ,. w , "Some people are alive only because
\|/ \|/ it is illegal to kill them." Perna condita delenda est
---^----^---------------------------------------------------------------

Tektronix 2445b with problem
 

Bob Larter wrote:

What's the URL for the mirror site?


http://bama.edebris.com/


--
And another motherboard bites the dust!

Tektronix 2445b with problem
 

Jim Yanik wrote:

I downloaded a 2465B manual a few weeks ago from BAMA,had no problem,then
the other day I got the password crap.The mirror site worked fine.


I'll bet you were using Internet Explorer. IE has trouble with FTP
access on some servers and has been reported multiple times for the main
BAMA site.


--
And another motherboard bites the dust!

Tektronix 2445b with problem
 

Michael A. Terrell wrote:
Bob Larter wrote:
What's the URL for the mirror site?

http://bama.edebris.com/

Thanks!

--
W
. | ,. w , "Some people are alive only because
\|/ \|/ it is illegal to kill them." Perna condita delenda est
---^----^---------------------------------------------------------------

Tektronix 2445b with problem
 

Bob Larter wrote:

Michael A. Terrell wrote:
Bob Larter wrote:
What's the URL for the mirror site?

http://bama.edebris.com/

Thanks!


You're welcome. He has a lot of good information on the two sites.


--
And another motherboard bites the dust!