Home |
Search |
Today's Posts |
![]() |
|
Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
|
#1
![]()
Posted to sci.electronics.repair
|
|||
|
|||
![]()
On 2/1/2009 11:26 AM N_Cook spake thus:
wrote in message ... Thank you for your suggestion, but I'm not sure what you mean. There are 96 traces on a cable that is 28mm wide, a very fine pitch. I think it is going to require a specialized product. Me neither, I don't know what holds these LCD TV interconnects together , they sound like a horrendous bodge to me, as manufactured. Perhaps when mass-produced OLED comes in I could see the point of moving away from CRT. Worse than your own horrendous bodges? -- Made From Pears: Pretty good chance that the product is at least mostly pears. Made With Pears: Pretty good chance that pears will be detectable in the product. Contains Pears: One pear seed per multiple tons of product. (with apologies to Dorothy L. Sayers) |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Cable or flex? | UK diy | |||
source of flex cable | Electronics Repair | |||
Cooker flex/cable again! | UK diy | |||
Attaching flex cable to PCB | Electronics Repair | |||
PS2 Repair? Inserting ribon/flex cable... | Electronics Repair |