Due to dirt in use or at manufacture?
Carlsboro 10 inch ,open circuit, so burrowed in to explore. On the phenolic
cylinder that is the former for the voice coil . 4 pairs of scored
ines( stand out white against the amber colour of the phenolic). Each pair
about 6 to 7mm apart and arranged pairwise diametrically.

I suspect 4 pieces of sharp edged metal shim used in the original cone
setting and scored on removal. All the lines go axially , fully from one end
to the other , so if made in use would require the diaphragm (spider?) being
driven 10 mm into the magnet housing. Apart from the nearly symetrical
distribution of the lines.

--
Diverse Devices, Southampton, England
electronic hints and repair briefs , schematics/manuals list on
http://home.graffiti.net/diverse:graffiti.net/