 |
|
| Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems. |
|
|
LinkBack | Thread Tools | Display Modes |
|
#1
Posted to alt.comp.hardware.pc-homebuilt,alt.comp.hardware,sci.electronics.design,sci.electronics.repair
|
|||
|
|||
Adding missing SATA connectors to motherboard
I have some motherboards designed for 4-6 SATA ports, but only 2 SATA
connectors were installed, and I'd like to add the missing connectors plus any needed termination resistors. Here's an example with an ECS GeForce 6100SM-M v. 1.0 motherboard: http://farm4.static.flickr.com/3397/...b349938d_o.jpg What are the values of the missing resistors? I thought that each pair of SATA data lines needed one 100 ohm resistor between them, but on this circuit board the resistors seem to be arranged differently. |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Rain missing gutter due to rotten/missing felt | UK diy | |||
| Sata power cable | Electronics Repair | |||
| Motherboard fuses - missing? | Electronics Repair | |||
| Source for crimp on SATA power connectors? | Electronics | |||
| Anyone use a Sata Minijet 2 to spray furniture. | Woodworking | |||
Threaded Mode
