Home |
Search |
Today's Posts |
![]() |
|
Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems. |
|
LinkBack | Thread Tools | Display Modes |
#11
![]()
Posted to sci.electronics.components,sci.electronics.design,sci.electronics.misc,sci.electronics.repair,alt.engineering.electrical
|
|||
|
|||
![]()
Are those times for cells that have been stored in unused condition,
or for cells that are in a device which is in occasional use? Unused, of course. Using the cell, even "occasionally", drains it. I believe that the former (shelf life when fully charged) is often a good deal better than the latter (lifetime once partially discharged). I've read that even a modest partial discharge of an alkaline cell starts an electrochemical reaction that can lead to corrosion of the case after a year or so. I've never seen this. Sounds like another myth started by someone who doesn't understand. The electrochemical reactions in batteries continue at all time, whether they are "new" or used. |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
The Gyrator as a 3-Terminal Element--by Jacob Shekel - The Gyrator as a 3-Terminal Element.pdf | Electronic Schematics | |||
Reciprocity Relations in Active 3-Terminal Devices - ReciprocityRelations in Active 3-Terminal Elements.pdf (1/2) | Electronic Schematics | |||
Reciprocity Relations in Active 3-Terminal Devices - Reciprocity Relations in Active 3-Terminal Elements.pdf (2/2) | Electronic Schematics | |||
Need Side Terminal Auto Battery tap | Home Repair | |||
Battery Terminal Corrosion Prevention | Home Repair |