Home |
Search |
Today's Posts |
|
Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to sci.electronics.repair
|
|||
|
|||
What The Frell Happened?
A few days ago I set my VCR/DVD player to recorrd some program and the
next morning, when the VCR came on, the door to the DVD player came open with a scream, the tray came out, and it would not close! I eventually got it shut, but later when I went to play a DVD, there was no image on the screen and the DVD part seems to be as dead as the dodo. Does anyone know what happened? Why my DVD player self- destructed? Ron |
#2
Posted to sci.electronics.repair
|
|||
|
|||
What The Frell Happened?
More than likely there is a mechanical failure in the mechunism for
loading the disk. There is also a possibility that there is a defecive sensor, and thus the mechunism is out of sequence. Open the case of the VCR/DVD machine. Check to see if the DVD drive is a standard IDE or SATA type drive. If it is, most of the off the shelf DVD writers will work in these machines. You can buy a new DVD drive and mount it in as like with a PC. As for these drives they are not supported for service. For most of the home type consumer electronics, unless the unit is a very expensive type there will be no service support. During the warranty the customer is given a complete new unit. Jerry G. -- Ron wrote: A few days ago I set my VCR/DVD player to recorrd some program and the next morning, when the VCR came on, the door to the DVD player came open with a scream, the tray came out, and it would not close! I eventually got it shut, but later when I went to play a DVD, there was no image on the screen and the DVD part seems to be as dead as the dodo. Does anyone know what happened? Why my DVD player self- destructed? Ron |
#3
Posted to sci.electronics.repair
|
|||
|
|||
What The Frell Happened?
Ron wrote: A few days ago I set my VCR/DVD player to recorrd some program and the next morning, when the VCR came on, the door to the DVD player came open with a scream, the tray came out, and it would not close! I eventually got it shut, but later when I went to play a DVD, there was no image on the screen and the DVD part seems to be as dead as the dodo. Does anyone know what happened? Why my DVD player self- destructed? Things aren't built the way they used to be are they ? Some years ago I bought a VCR for about £50 just before VCRs became virtually obsolete. I wanted a cheap 'backup'. It worked OK but lasted about 3 years before packing up with a tape stuck inside. ***20*** years ago I bought my first VCR for ~ £400. It was a reasonably high spec model with an LCD remote but there were higher spec models. It still works, albeit the motor's a bit noisy now and the audio head's a bit worn and you can hear some wow and flutter but it refuses to die. Graham |
#4
Posted to sci.electronics.repair
|
|||
|
|||
What The Frell Happened?
"Ron" wrote in message ... A few days ago I set my VCR/DVD player to recorrd some program and the next morning, when the VCR came on, the door to the DVD player came open with a scream, the tray came out, and it would not close! I eventually got it shut, but later when I went to play a DVD, there was no image on the screen and the DVD part seems to be as dead as the dodo. Does anyone know what happened? Why my DVD player self- destructed? Ron Power glitch/spike? Did you unplug it for 5 minutes to see if would reset? |
#5
Posted to sci.electronics.repair
|
|||
|
|||
What The Frell Happened?
On Sat, 13 Sep 2008 17:36:47 -0700 (PDT), Ron wrote:
Why my DVD player self-destructed? Made in China. |
#6
Posted to sci.electronics.repair
|
|||
|
|||
What The Frell Happened?
"Jerry G." wrote in message If it is, most of the off the shelf DVD writers will work in these machines. Right, but how the hell is he going to record anything if it didn't have DVD-RW capabilites to begin with, you top posting jerkoff? |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
What Happened? | Woodworking | |||
What Happened?????? | Woodturning | |||
What happened to it? | Metalworking | |||
Wonder how *that* happened... | Metalworking | |||
What happened to IMM? | UK diy |