Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems.

 
 
LinkBack Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
  #1   Report Post  
Posted to alt.lasers,sci.optics,sci.electronics.repair
external usenet poster
 
Posts: 7
Default Recommended USENET newsgroup access

OK, a bit off topic but may apply to others at universities as they
upgrade their computer
systems.

So UPenn and Drexel have pulled the plug on their USENET news
servers. I'm looking for recommendations on newsgroup access,
preferably via GNUS, which many consider antiquated, as far as I can
tell, it is 10 times faster to read and post than using the fancy GUI
"modern" alternatives.

Thanks!

--- sam | Sci.Electronics.Repair FAQ: http://www.repairfaq.org/
Repair | Main Table of Contents: http://www.repairfaq.org/REPAIR/
+Lasers | Sam's Laser FAQ: http://www.repairfaq.org/sam/lasersam.htm
| Mirror Sites: http://www.repairfaq.org/REPAIR/F_mirror.html

Important: Anything sent to the email address in the message header
above is
ignored unless my full name AND either lasers or electronics is
included in the
subject line. Or, you can contact me via the Feedback Form in the
FAQs.


 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Newsgroup access tips... John Rumm UK diy 0 December 1st 07 01:32 AM
Riaa trying to take down the usenet. and yes it's on topic this is a newsgroup [email protected] Metalworking 15 October 19th 07 06:50 AM
Newsgroup access [email protected] UK diy 22 January 26th 07 04:50 PM
AOl to discontinue newsgroup access PMarks1694 Woodturning 9 January 26th 05 06:56 PM
Where do you access this newsgroup? ToolMiser Woodworking 16 January 19th 05 10:51 PM


All times are GMT +1. The time now is 01:05 AM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 DIYbanter.
The comments are property of their posters.
 

About Us

"It's about DIY & home improvement"