Home |
Search |
Today's Posts |
|
Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems. |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to sci.electronics.repair
|
|||
|
|||
JVC AV 27850 - common cause for deflection problem?
Hi:
The vertical deflection went out on my TV a few days ago. It started acting funny a few days prior to it going out altogether. I'd turn the set on and the thin horizontal line would appear, then fully deflect, and oscillate back a forth a few times, sometimes staying a line for a min or two, then deflect to full screen, etc. Now it just stays on as a thin horizontal like across the screen, about 1/8" thick. Are there any things prone to failure in this set that I should look at? OR, any common problems with this set in general? e.g. bad solder joints around? Thanks for any insight! John |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Zenith Vertical Deflection Problem | Electronics Repair | |||
Request for help with steel shaft deflection problem | Metalworking | |||
Monitor: deflection problem? | Electronics Repair | |||
Panasonic CT-20G3W1 Vert. Deflection Problem | Electronics Repair | |||
Monitor Vert Deflection Problem | Electronics Repair |