Home |
Search |
Today's Posts |
|
Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to sci.electronics.repair,rec.radio.swap,misc.industry.electronics.marketplace,sci.electronics.equipment
|
|||
|
|||
Tektronix WSTR31 wtb
Anyone have a spare or unneeded set of 4 floppies with WSTR31 which is
the screen transfer software for a Tektronix THS720A? Thanks -- 73 Hank WD5JFR |
#2
Posted to sci.electronics.repair,rec.radio.swap,misc.industry.electronics.marketplace,sci.electronics.equipment
|
|||
|
|||
Tektronix WSTR31 wtb
On 22 Apr, 02:42, "Henry Kolesnik"
wrote: Anyone have a spare or unneeded set of 4 floppies with WSTR31 which is the screen transfer software for a Tektronix THS720A? Thanks -- 73 Hank WD5JFR As far I know, You don't need any SW to get the screen of you THS710A. Just set your scope Hard Copy to BMP, and the RS232 to default, then use your windows Hyper-Terminal setting it to 9600baud, 8bits data, no parity, 1 bit stop and HW flagging and press the connect button ignoring the phone number. Go to the transfer pull-down menu and start the text acquisition giving a name with the BMP extension. Press the Hard Copy on your THS720 and when the transfer has finished, return to the transfer pull-down menu of the Hyperterminal and stop the text acquisition. That's all, you have a B/W image of the scope in BMP format. If you want it, you can download my Tek_FFT software from the tektronix web-site, to get a real time FFT spectrum on your scope. They put it as a DOS application for the TDS2xx series only, but I did it for the THS7xx indeed. The link is below: http://www2.tek.com/cmswpt/swdetails...TO+DISPLAY+FFT Note that the software was written for the DOS environment, and it has some problem with the latest mouse drivers (they hang up the communication with the DSO), so it is better to use it via the keyboard. The software produces PCX and HPGL documentation. Have a nice day 73 Massimo IK1IZA |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
tektronix 2467 | Electronics Repair | |||
Tektronix 2465 | Electronics Repair | |||
Tektronix 442 pot 20k | Electronics Repair | |||
Tektronix TDS 540 and options | Electronics Repair |