 |
|
| Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems. |
|
|
LinkBack | Thread Tools | Display Modes |
|
#1
Posted to sci.electronics.repair
|
|||
|
|||
Intermittant combo/ amp vibration fault inducer ?
Anyone have any advice beyond just rattling connectors , contacts,
components etc with a bit of plastic pen barrel., plus hot air gun heating / running amp into dummy load? Engraving tool with the steel tip replaced with something plastic.? Setting the whole cabinet on a motor driven offset cam ? if so what revs/sec range ? -- Diverse Devices, Southampton, England electronic hints and repair briefs , schematics/manuals list on http://home.graffiti.net/diverse:graffiti.net/ |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Question furnace inducer motor | Home Repair | |||
| Furnace inducer motors | Home Repair | |||
| Vibration testing of combo amps | Electronics Repair | |||
| Furnace Inducer is leaking | Home Repair | |||
| Bryant furance inducer problem | Home Repair | |||
Threaded Mode
