Check the PCC Diode and Capacitor, both in very close proximetry of the
H-Output. Referred to as the blue square capacitor, if defective you will
notice it may be a bit swelled on the sides, replace the associated diode
also.
"Dani" wrote in message
ups.com...
Check the convergence power supply, the board in the top right hand of
the "light box"! Also, check the blue square high
voltage capacitor, & large barrell diode in the pincushion correction
circuit on the main board. Possibly, but unlikely, it could be the
large convergence board bottom right hand side of the "light box"!
Dani.