Home |
Search |
Today's Posts |
|
Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to sci.electronics.repair
|
|||
|
|||
Motorola 2way talkabout radios
Hello, Does anyone have a pinout and circuit of the headset/shoulder
mic pinout for the single 2.5mm jack radios? |
#2
Posted to sci.electronics.repair
|
|||
|
|||
Motorola 2way talkabout radios
Gavin wrote in news:1186647783.552758.120010
@x40g2000prg.googlegroups.com: Hello, Does anyone have a pinout and circuit of the headset/shoulder mic pinout for the single 2.5mm jack radios? Is there anything special about those headset? I would think a standard 2.5mm heaset wouls work. |
#3
Posted to sci.electronics.repair
|
|||
|
|||
Motorola 2way talkabout radios
Gary Tait wrote:
Gavin wrote in news:1186647783.552758.120010 @x40g2000prg.googlegroups.com: Hello, Does anyone have a pinout and circuit of the headset/shoulder mic pinout for the single 2.5mm jack radios? Is there anything special about those headset? I would think a standard 2.5mm heaset wouls work. Actually, not. The pinout is the same, but Motorola added a few millimeters to the sleeve length which mandates using branded accessories. IIRC, the actual jack is standard, it's just set a little further down into the body of the device. jak |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
General Electric Mastr 2way Handheld help | Electronics Repair | |||
Motorola P10 Radius radios | Electronics Repair | |||
What happens to old FM radios? | Electronics Repair | |||
OT Digital Radios | UK diy | |||
[ OT ] FRS radios / 2-way radios | Home Repair |