Home |
Search |
Today's Posts |
|
Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems. |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to sci.electronics.repair
|
|||
|
|||
Surge protectors?
I have moved to a location (Florida) where surges are a concern. I
have been looking at two candidates for surge protection at the point of use (outlet). The two candiidates a Power Sentry 100344 -- which says it will disconnect the load if surge is sensed to be more than 2ms Panamax M4T-EX which is MOV based from a highly rated company. I have a whole house MOV based protector by LEA at the load center and want to do more. Maybe more is better? I don't know. Anyone used a system that they know works? There is so much info out there that you don't which is an good. I'm not sure if this is the correct group for this question either. Thanks, Jay |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Surge Protectors | UK diy | |||
surge protectors | Home Repair | |||
Surge Protectors | Home Repair | |||
The Season for needing Surge Protectors and Interference Filters is upon us. | Electronics Repair | |||
Are PC surge protectors needed in the UK? | Electronics Repair |