Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems.

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
Posted to sci.electronics.repair
external usenet poster
 
Posts: 7
Default LCD TV Tuner Shot on New TV

I bought an LG 15" LCD TV back in March for our RV. Tested it at home
first, worked great. First time we used it in the RV, the cable
channels were kind of snowy. Wasn't sure if that was the fault of the
cable at the RV Park. On subsequent uses it didn't work at all - so I
realized the tuner was shot (haven't even tested the digital/HD
component yet). It was too late to exchange for a replacement at the
retailer, so I had to bring it in to be serviced. Luckily, LG has a 2
year warranty on their LCD TVs, so that wasn't a problem. They told
me it was the "Main Board" that needed to be replaced. The part is
going to take 1-2 weeks to order...good thing it's only a TV for the
RV!

I have a couple of questions about this type of problem:

1. Are problems with the tuner common in a newer TV? Are HD tuners
more prone to failure? I've had a tuner go a couple of times on an
old tube TV before, but never on an LCD - and never on a NEW TV that
had a working tuner to begin with.

2. We mount the TV in our RV by the base of the TV, so the LCD screen
probably wriggles a bit during travel (since it can only be secured as
strongly as the display is secured is to the base). Most LCDs are
mounted via the screen itself using a wall-mount. I would expect wall-
mounts reduce the jiggle on the LCD display. I am curious if this
'jiggling" on our TV may have contributed to the LCD tuner failing?

Thanks!
Paula

  #2   Report Post  
Posted to sci.electronics.repair
external usenet poster
 
Posts: 110
Default LCD TV Tuner Shot on New TV

Assuming it wasn't infant mortality, I would be concerned with vibration
first and voltage surges next. Can you wall mount it? The best way is a
bracket that takes advantage of at least four wide spaced mounting
points on the back of the panel. Secondly, make sure the cables don't
bounce around and flex the PC boards inside. Next, consider the
possibility that a voltage surge from the cable TV system might have
taken out the tuner. When you park at a random RV lot, you have to be
aware that the grounding for the power system and the cable TV might
have radically different potentials. Install a surge protector in your
RV and make sure it references to the AC protective ground system of
your RV and the supply provided by the park.

If you are running off a generator and your RV is floating, you have
another problem if there is a lightning strike as the surge will passs
through the TV and out the cable TV connection. Maybe having your own
satellite dish is safer?

Pokee wrote:

I bought an LG 15" LCD TV back in March for our RV. Tested it at home
first, worked great. First time we used it in the RV, the cable
channels were kind of snowy. Wasn't sure if that was the fault of the
cable at the RV Park. On subsequent uses it didn't work at all - so I
realized the tuner was shot (haven't even tested the digital/HD
component yet). It was too late to exchange for a replacement at the
retailer, so I had to bring it in to be serviced. Luckily, LG has a 2
year warranty on their LCD TVs, so that wasn't a problem. They told
me it was the "Main Board" that needed to be replaced. The part is
going to take 1-2 weeks to order...good thing it's only a TV for the
RV!

I have a couple of questions about this type of problem:

1. Are problems with the tuner common in a newer TV? Are HD tuners
more prone to failure? I've had a tuner go a couple of times on an
old tube TV before, but never on an LCD - and never on a NEW TV that
had a working tuner to begin with.

2. We mount the TV in our RV by the base of the TV, so the LCD screen
probably wriggles a bit during travel (since it can only be secured as
strongly as the display is secured is to the base). Most LCDs are
mounted via the screen itself using a wall-mount. I would expect wall-
mounts reduce the jiggle on the LCD display. I am curious if this
'jiggling" on our TV may have contributed to the LCD tuner failing?

Thanks!
Paula




--
Joe Leikhim K4SAT
"The RFI-EMI-GUY"©

"Treason doth never prosper: what's the reason?
For if it prosper, none dare call it treason."

"Follow The Money" ;-P

  #3   Report Post  
Posted to sci.electronics.repair
Art Art is offline
external usenet poster
 
Posts: 195
Default LCD TV Tuner Shot on New TV

Presuming the product is a known viable brand and parts are available the
have it repaired under the manufacturer's warrenty. Many of the off brand
products neither have support or parts available. When in motion select a
location and padding that will mitigate excessive vibration for the item.
"**THE-RFI-EMI-GUY**" wrote in message
...
Assuming it wasn't infant mortality, I would be concerned with vibration
first and voltage surges next. Can you wall mount it? The best way is a
bracket that takes advantage of at least four wide spaced mounting points
on the back of the panel. Secondly, make sure the cables don't bounce
around and flex the PC boards inside. Next, consider the possibility that
a voltage surge from the cable TV system might have taken out the tuner.
When you park at a random RV lot, you have to be aware that the grounding
for the power system and the cable TV might have radically different
potentials. Install a surge protector in your RV and make sure it
references to the AC protective ground system of your RV and the supply
provided by the park.

If you are running off a generator and your RV is floating, you have
another problem if there is a lightning strike as the surge will passs
through the TV and out the cable TV connection. Maybe having your own
satellite dish is safer?

Pokee wrote:

I bought an LG 15" LCD TV back in March for our RV. Tested it at home
first, worked great. First time we used it in the RV, the cable
channels were kind of snowy. Wasn't sure if that was the fault of the
cable at the RV Park. On subsequent uses it didn't work at all - so I
realized the tuner was shot (haven't even tested the digital/HD
component yet). It was too late to exchange for a replacement at the
retailer, so I had to bring it in to be serviced. Luckily, LG has a 2
year warranty on their LCD TVs, so that wasn't a problem. They told
me it was the "Main Board" that needed to be replaced. The part is
going to take 1-2 weeks to order...good thing it's only a TV for the
RV!

I have a couple of questions about this type of problem:

1. Are problems with the tuner common in a newer TV? Are HD tuners
more prone to failure? I've had a tuner go a couple of times on an
old tube TV before, but never on an LCD - and never on a NEW TV that
had a working tuner to begin with.

2. We mount the TV in our RV by the base of the TV, so the LCD screen
probably wriggles a bit during travel (since it can only be secured as
strongly as the display is secured is to the base). Most LCDs are
mounted via the screen itself using a wall-mount. I would expect wall-
mounts reduce the jiggle on the LCD display. I am curious if this
'jiggling" on our TV may have contributed to the LCD tuner failing?

Thanks!
Paula



--
Joe Leikhim K4SAT
"The RFI-EMI-GUY"©

"Treason doth never prosper: what's the reason?
For if it prosper, none dare call it treason."

"Follow The Money" ;-P



Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Decoding Ford car CD/Tuner 6000 CD Tuner [email protected] Electronics Repair 2 August 28th 06 11:26 PM
It's a long shot, but . . . . Jon Yaeger Electronics Repair 2 June 25th 05 06:04 PM
Window seals shot FREECYCLEMOM Home Repair 15 May 16th 05 03:14 PM
Window seals shot FREECYCLEMOM Home Repair 3 May 13th 05 01:50 AM
one shot circuit KK Electronics 2 November 26th 04 04:44 PM


All times are GMT +1. The time now is 04:10 AM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 DIYbanter.
The comments are property of their posters.
 

About Us

"It's about DIY & home improvement"