This Icon unit is a ceiling unit for a car with an F6400TFT LCD monitor.
The circuit board inside says Toshiba TED60W12B and 1H16950. The
connections to it were cleanly cut- I want to connect power- 12 volts, and
video. There is a tiny white connector on the control board, but no
designations as to what the 4 or 5 pins are. Would anyone have a pinout of
this or know where to make connections?
Thanks for your help.
mm

On Sat, 16 Jun 2007 22:25:36 GMT, "Michael Muderick"
put finger to keyboard and composed:

This Icon unit is a ceiling unit for a car with an F6400TFT LCD monitor.
The circuit board inside says Toshiba TED60W12B and 1H16950. The
connections to it were cleanly cut- I want to connect power- 12 volts, and
video. There is a tiny white connector on the control board, but no
designations as to what the 4 or 5 pins are. Would anyone have a pinout of
this or know where to make connections?
Thanks for your help.
mm

Your first problem is to determine how many pins there are. :-)

The supply and ground pins would probably go to an electrolytic filter
capacitor. The video input (assuming it is composite) may go to a
buffer transistor and possibly a 75 ohm terminator resistor. Can you
measure 75 ohms between any two pins?

Do you have a cable stub? If so, can you see a mini coax pair?

Can you post a photo of the PCB on your web space?

- Franc Zabkar
--
Please remove one 'i' from my address when replying by email.