Home |
Search |
Today's Posts |
|
Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems. |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to sci.electronics.repair
|
|||
|
|||
American machine screw types
For period 1970 to 2000, whatever they are, they are not very common in
Europe. Coarser thread , diam for diam, than the usual European mm and BA. Common sizes are about 0.132 in outside diam. , pitch 32 TPI, would they be UNC 6 ? and 0.11 inch od and TPI about 40 , would they be 4 UNC ? -- Diverse Devices, Southampton, England electronic hints and repair briefs , schematics/manuals list on http://home.graffiti.net/diverse:graffiti.net/ |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Grounding Screw Sizes & Types | Home Repair | |||
Machine screw sizes? | UK diy | |||
Where to get ONE 6-40 machine screw? | Metalworking | |||
screw machine cams ??? | Metalworking | |||
where can I find this machine screw? | Woodworking |